MST
询价清单购物车
ALNP-16-3-5

ALNP-16-3-5 QFN 塑料空腔管壳,3.00 x 3.00 mm

Applications and selection tips

Typical applications

  • Die assembly and wire-bond prototyping of bare dies
  • Packaging MPW / shuttle dies for evaluation and characterization
  • Failure analysis and re-packaging of decapsulated dies

Industries

  • Design houses
  • Semiconductor startups
  • Equipment vendors
  • Suppliers entering fab supply chains

Selection tips

  • The die must fit inside the 1.36 x 1.36 mm nominal die-attach area, leaving room for the die-attach fillet.
  • Catalogue cavity dimension: 0.65 mm. Confirm the component and datum on the package and lid drawings, then check die thickness, die-attach bond line, wire-loop height and lid clearance together.
  • 16 connections at 0.5 mm pitch: check against your bond-pad count and wire-bond tool.
  • For the 3.00 x 3.00 mm body, confirm the lid outline, seal interface and assembled clearance from the matching drawings; outline size alone does not establish fit.
MST engineering note, computed from the published specifications above. Request a quote.

技术参数

厂家型号ALNP-16-3-5
类型QFN 塑料空腔管壳
外形3.00 x 3.00 mm
连接点数量16
间距0.5 mm
腔深0.65 mm
标称芯片安装区1.36 x 1.36 mm
Product familyEmpty Ic Packages
Public SKUALNP-16-3-5
Display descriptionALNP-16-3-5 empty plastic qfn package, 3.00 x 3.00 mm
采购方式产品询价/MST 在接受订单前确认需求及最终报价
最小起订量(MOQ)1
价格说明本页不承诺结算价格或库存;MST 审核后确认配置、MOQ、交期及最终 USD 报价。
适用采购群体晶圆厂相关采购群体:设计公司、半导体初创企业、设备厂商及进入晶圆厂供应链的供应商。

规格书要点

规格书 MST dimension summary: ALNP-16-3-5,版本 2026-10

这颗料的技术文章

More parts in this category

价格与交期

询价
最小订购量
1 件
订购增量
1 件
供货情况
询价时确认
供货周期
随报价确认

供货周期不含运输时间,迈烁将根据收货目的地确认交付计划。

至少 1 件,并按 1 的倍数订购。

发送数量和邮箱以申请报价。迈烁将在下单前通过邮件确认供货、最终价格和交付条款。

获取报价

型号
ALNP-16-3-5
数量
1
公司 / 国家或地区(选填)

选型与应用

选型要点

供货内容

QFN 塑料空腔管壳。裸片、盖板、键合线和封装加工另计。

尺寸核对

标称外形 3.00 x 3.00 mm。芯片安装区为 1.36 x 1.36 mm;需核对芯片厚度、线弧高度及加工余量。

数量和交期

请提供准确型号、所需数量、收货地和期望日期。询价表从 1 件需求开始接收;实际起供量、可供数量、价格和交期在报价时确认。

图示和适配

尺寸图为 MST 根据厂家数值资料整理的示意,不是实物照片、PCB 封装或生产图;订购前请索取当前型号图纸。

资料范围

所链接的厂家页面介绍产品系列。型号尺寸来自 MST 核对过的供应商资料;封装前请确认当前型号图纸、公差、键合及盖板工艺,系列介绍不代表可直接互换。

典型应用

  • 请按最新厂家图纸确认尺寸、公差和工艺适配。
  • 询价数量为客户需求数量,不代表现货数量或已确认的厂家起供量。

常见问题

ALNP-16-3-5 的关键参数是什么?

ALNP-16-3-5:厂家型号: ALNP-16-3-5; 类型: QFN 塑料空腔管壳; 外形: 3.00 x 3.00 mm; 连接点数量: 16; 间距: 0.5 mm; 腔深: 0.65 mm。完整数值见上方参数表。

如何获取 ALNP-16-3-5 的价格?

ALNP-16-3-5 的价格、货期和交期以报价为准。请通过本页询价表提交数量。

没有上架的型号,MST 能代为寻源吗?

可以。通过询价表发送准确型号和数量,MST 寻源后回复报价。