
Applications and selection tips
Typical applications
- Die assembly and wire-bond prototyping of bare dies
- Packaging MPW / shuttle dies for evaluation and characterization
- Failure analysis and re-packaging of decapsulated dies
Industries
- Design houses
- Semiconductor startups
- Equipment vendors
- Suppliers entering fab supply chains
Selection tips
- The die must fit inside the 5.20 x 5.20 mm nominal die-attach area, leaving room for the die-attach fillet.
- Catalogue cavity dimension: 1.25 mm. Confirm the component and datum on the package and lid drawings, then check die thickness, die-attach bond line, wire-loop height and lid clearance together.
- 48 connections at 0.5 mm pitch: check against your bond-pad count and wire-bond tool.
- Drawing process limits: Die attach <= 200 C; wire bonding <= 100 C. Choose die-attach and lid materials that process within them.
- Closure: B-stage adhesive; lid separate.
- Operating temperature: -50 to +105 C.
- For the 7.00 x 7.00 mm body, confirm the lid outline, seal interface and assembled clearance from the matching drawings; outline size alone does not establish fit.
技术参数
规格书要点
规格书 MST dimension summary: ALNP-48-7-5H,版本 2026-10
More parts in this category
- ALNP-40-5-4 empty plastic qfn package, 5.00 x 5.00 mm
- ALNP-40-6-5F empty plastic qfn package, 6.00 x 6.00 mm
- ALNP-40-6-5H empty plastic qfn package, 6.00 x 6.00 mm
- ALNP-44-7-5 empty plastic qfn package, 7.00 x 7.00 mm
- ALNP-44-9-6.5 empty plastic qfn package, 9.00 x 9.00 mm
- ALNP-48-7-5 empty QFN48 LCP package, 7 x 7 mm
- ALNP-56-8-5H empty plastic qfn package, 8.00 x 8.00 mm
- ALNP-64-9-5H empty plastic qfn package, 9.00 x 9.00 mm
- ALNP-72-10-5 empty plastic qfn package, 10.00 x 10.00 mm
- ALNP-8-3-6.5 empty plastic qfn package, 3.00 x 3.00 mm
- ALNP-88-10-4 empty plastic qfn package, 10.00 x 10.00 mm
- ALNP-96-10-4 empty plastic qfn package, 10.00 x 10.00 mm
价格与交期
- 最小订购量
- 随报价确认
- 订购增量
- 随报价确认
- 供货情况
- 询价时确认
- 供货周期
- 随报价确认
供货周期不含运输时间,迈烁将根据收货目的地确认交付计划。
发送数量和邮箱以申请报价。迈烁将在下单前通过邮件确认供货、最终价格和交付条款。
选型与应用
选型要点
按询价数量的美元参考单价
10 pcs: USD 14.64/pc; 50 pcs: USD 12.16/pc。这些是报价数量档,不代表现货;最终数量、价格和交期以正式报价为准。
仅空管壳,裸片、盖板、测试座和组装另计。国际运费及进口费用另计;其他数量和确定发货日期请询价。
供货内容
QFN 塑料空腔管壳。裸片、盖板、键合线和封装加工另计。
尺寸核对
标称外形 7.00 x 7.00 mm。芯片安装区为 5.20 x 5.20 mm;需核对芯片厚度、线弧高度及加工余量。
加深腔选型
该型号标称腔深 1.25 mm;替换普通腔型号前需核对盖板余量和键合操作空间。
数量和交期
请提供准确型号、所需数量、收货地和期望日期。询价表从 1 件需求开始接收;实际起供量、可供数量、价格和交期在报价时确认。
图示和适配
尺寸图为 MST 根据厂家数值资料整理的示意,不是实物照片、PCB 封装或生产图;订购前请索取当前型号图纸。
资料范围
所链接的厂家页面介绍产品系列。型号尺寸来自 MST 核对过的供应商资料;封装前请确认当前型号图纸、公差、键合及盖板工艺,系列介绍不代表可直接互换。
典型应用
常见问题
ALNP-48-7-5H 的关键参数是什么?
ALNP-48-7-5H:参考单价(10只): USD 14.64/pc; 参考单价(50只): USD 12.16/pc; 厂家型号: ALNP-48-7-5H; 类型: QFN 塑料空腔管壳; 外形: 7.00 x 7.00 mm; 连接点数量: 48。完整数值见上方参数表。
如何获取 ALNP-48-7-5H 的价格?
ALNP-48-7-5H 的价格、货期和交期以报价为准。请通过本页询价表提交数量。
没有上架的型号,MST 能代为寻源吗?
可以。通过询价表发送准确型号和数量,MST 寻源后回复报价。