MST
询价清单购物车
BGA1313-256BALLS

BGA1313-256balls IC 空腔封装管壳,13.00 x 13.00 mm

Applications and selection tips

Typical applications

  • Die assembly and wire-bond prototyping of bare dies
  • Packaging MPW / shuttle dies for evaluation and characterization
  • Failure analysis and re-packaging of decapsulated dies
  • High-I/O dies needing a 256-ball array

Industries

  • Design houses
  • Semiconductor startups
  • Equipment vendors
  • Suppliers entering fab supply chains

Selection tips

  • The die must fit inside the 8.00 x 8.00 mm nominal die-attach area, leaving room for the die-attach fillet.
  • Catalogue cavity dimension: 3 mm; component and datum require drawing confirmation. Confirm the component and datum on the package and lid drawings, then check die thickness, die-attach bond line, wire-loop height and lid clearance together.
  • 256 connections at 0.7 mm pitch: check against your bond-pad count and wire-bond tool.
  • Closure: B-stage epoxy.
  • Operating temperature: -40 to +105 °C.
  • For the 13.00 x 13.00 mm body, confirm the lid outline, seal interface and assembled clearance from the matching drawings; outline size alone does not establish fit.
MST engineering note, computed from the published specifications above. Request a quote.

技术参数

厂家型号BGA1313-256balls
类型IC 空腔封装管壳
外形13.00 x 13.00 mm
连接点数量256
间距0.7 mm
目录所列腔深3 mm;对应部件及测量基准须按图纸确认
标称芯片安装区8.00 x 8.00 mm
Product familyEmpty Ic Packages
Public SKUBGA1313-256BALLS
Display descriptionBGA1313-256balls empty bga cavity package, 13.00 x 13.00 mm
采购方式产品询价/MST 在接受订单前确认需求及最终报价
最小起订量(MOQ)1
价格说明本页不承诺结算价格或库存;MST 审核后确认配置、MOQ、交期及最终 USD 报价。
适用采购群体晶圆厂相关采购群体:设计公司、半导体初创企业、设备厂商及进入晶圆厂供应链的供应商。
焊球阵列16 x 16 全阵列,256 球
焊球直径0.45 mm
键合指间距约 0.13 mm
表面处理NiPdAu(镍钯金)
工作温度-40 ~ +105 °C
封盖方式B 阶环氧封盖
配套盖板可提供配套 CAP 盖板,随管壳一起报价

规格书要点

规格书 MST dimension summary: BGA1313-256balls,版本 2026-10

这颗料的技术文章

More parts in this category

价格与交期

询价
最小订购量
1 件
订购增量
1 件
供货情况
询价时确认
供货周期
随报价确认

供货周期不含运输时间,迈烁将根据收货目的地确认交付计划。

至少 1 件,并按 1 的倍数订购。

发送数量和邮箱以申请报价。迈烁将在下单前通过邮件确认供货、最终价格和交付条款。

获取报价

型号
BGA1313-256balls
BGA1313-256BALLS
数量
1
公司 / 国家或地区(选填)

选型与应用

选型要点

供货内容

IC 空腔封装管壳。裸片、盖板、键合线和封装加工另计。

尺寸核对

标称外形 13.00 x 13.00 mm。芯片安装区为 8.00 x 8.00 mm;需核对芯片厚度、线弧高度及加工余量。

数量和交期

请提供准确型号、所需数量、收货地和期望日期。询价表从 1 件需求开始接收;实际起供量、可供数量、价格和交期在报价时确认。

图示和适配

尺寸图为 MST 根据厂家数值资料整理的示意,不是实物照片、PCB 封装或生产图;订购前请索取当前型号图纸。

腔深含义

目录列出 3 mm。用于核对芯片厚度或线弧高度前,须从当前图纸确认对应部件、测量基准、配套盖板及装配后的净空。

盖板区别

ALN 将配套 12.8 × 12.8 mm LCP 盖板描述为内腔深 3 mm;这不能证明裸 BGA 基板凹槽深 3 mm,也不等于装配后的键合线净空。

典型应用

  • 请按最新厂家图纸确认尺寸、公差和工艺适配。
  • 询价数量为客户需求数量,不代表现货数量或已确认的厂家起供量。

常见问题

BGA1313-256balls 的关键参数是什么?

BGA1313-256balls:厂家型号: BGA1313-256balls; 类型: IC 空腔封装管壳; 外形: 13.00 x 13.00 mm; 连接点数量: 256; 间距: 0.7 mm; 目录所列腔深: 3 mm;对应部件及测量基准须按图纸确认。完整数值见上方参数表。

如何获取 BGA1313-256balls 的价格?

BGA1313-256balls 的价格、货期和交期以报价为准。请通过本页询价表提交数量。

没有上架的型号,MST 能代为寻源吗?

可以。通过询价表发送准确型号和数量,MST 寻源后回复报价。