MST Engineering이 영어 원문을 번역했습니다. 원문 보기
Bourns SRP1038A-R36M vs MAZO LPCA-1040-R36-M
Verdict: Close. Check your peak current and temperature first.
The MAZO part has the same inductance, the same DCR and the same pad span. It saturates earlier, its temperature limit is 25 °C lower and it has no AEC-Q200 statement.
| Bourns SRP1038A-R36M | MAZO LPCA-1040-R36-M | Result | |
|---|---|---|---|
| Inductance | 0.36 µH ±20 % @ 100 kHz, 1 V | 0.36 µH ±20 % @ 1 MHz, 1 V | Same value; test frequency differs |
| DCR typ / max | 1.05 / 1.2 mΩ | 1.05 / 1.2 mΩ | Same |
| Heating current | 31 A (40 °C rise) | 30 A typ (≈40 °C rise) | 1 A lower |
| Saturation current | 60 A (20 % L drop) | 50 A typ (≈30 % L drop) | Lower; about 40 A at a 20 % drop on the MAZO curve |
| Body | 11.0±0.5 × 10.0±0.3 × 3.8±0.2 mm | 11.5 max × 10.0±0.3 × 3.8±0.2 mm (4.0 max) | Same envelope |
| Land pattern | 2 pads 4.1 × 3.5 mm, gap 5.4, span 13.6 | 2 pads 4.1 × 4.1 mm, gap 5.4, span 13.6 | Same span and gap; MAZO pad 0.6 mm longer |
| Operating range (incl. self-heating) | −55 to +150 °C | −55 to +125 °C | 25 °C lower |
| AEC-Q200 | Compliant | Not stated | Missing |
MAZO LPCA-1040-R36-M
Same 0.36 µH, DCR and pad span. Keep peak current below about 40 A and the part at or below 125 °C.
MAZO VCMA-1040-R36-M-1A (AEC-Q200)
For automotive designs: same body, AEC-Q200, Idc 32 A typ / 30 A max, Isat 54 A typ / 50 A max (≈30 % drop), −55 to +125 °C.
Power inductor selection guide · All MAZO power inductors
Not an equivalent or drop-in part. Verify efficiency, temperature rise and ripple in your circuit before you change the BOM. Freight, duties and tax are confirmed separately; transit time comes on top of dispatch preparation.
주요 데이터시트 값 (Bourns SRP1038A Series 데이터시트)
| 매개변수 | SRP1038A-R36M | 조건 / 참고 |
|---|---|---|
| 인덕턴스 | 0.36 µH ±20 % | @ 100 kHz / 1 V |
| Q (최솟값) | 15 | @ 100 kHz / 1 V |
| SRF | 105 MHz 대표값 | |
| DCR | 1.05 mΩ 대표값, 1.2 mΩ 최댓값 | |
| Irms | 31 A | 정격 Irms에서 온도 상승 40 °C |
| Isat | 60 A | Isat에서 인덕턴스 20 % 감소 |
| 동작 온도 | –55 °C to +150 °C | 온도 상승 포함 |
| 보관 온도 | –55 °C to +150 °C | |
| 치수 | 11.0 ±0.5 × 10.0 ±0.3 mm, 높이 3.8 ±0.2 mm | |
| 코어 / 단자 마감 | 카보닐 분말 코어; Sn 단자 | |
| 적격성 | AEC-Q200 준수; RoHS 준수, 할로겐 무함유 | |
| MSL | 1 | |
| 포장 | 13-inch 릴당 500 pcs |
MST 스토어의 교차 참조 후보 (검증 대상이며 동등품이 아님)

| 매개변수 | Bourns SRP1038A-R36M | MAZO LPCA-1040-R36-M | MAZO VCMA-1040-R36-M-1A |
|---|---|---|---|
| 인덕턴스 | 0.36 µH ±20 % @ 100 kHz, 1 V | 0.36 µH ±20 % @ 1 MHz, 1.0 V | 0.36 µH ±20 % @ 1 MHz, 1.0 V |
| DCR 대표값 / 최댓값 | 1.05 / 1.2 mΩ | 1.05 / 1.2 mΩ | 0.95 / 1.2 mΩ |
| 포화 전류 | 60 A (20 % 감소) | 50 A 대표값 (약 30 % 감소) | 대표값 54 A, 최댓값 열에 50 A 기재 (약 30 % 감소) |
| 온도 상승 전류 | 31 A (40 °C 상승) | 30 A 대표값 (약 40 °C 상승) | 대표값 32 A, 최댓값 열에 30 A 기재 (약 40 °C 상승) |
| 크기 | 11.0 × 10.0 × 3.8 mm | 최대 11.5 × 10.3 × 4.0 mm | 최대 11.5 × 10.3 × 4.0 mm |
| 동작 온도 | –55 to +150 °C | –55 to +125 °C | –55 to +125 °C |
| AEC-Q200 | 준수 | 명시되지 않음 | 준수 |
- 데이터시트 기준으로 동등하지 않습니다. 포화 전류의 정의가 서로 다르므로(20 % 감소 대 약 30 % 감소), 60 A와 50/54 A를 직접 비교할 수 없습니다. 인덕턴스도 서로 다른 주파수에서 시험합니다.
- MAZO 부품의 크기와 높이가 더 큽니다(최대 4.0 mm 대 3.8 ±0.2 mm). 최대 동작 온도도 더 낮습니다(125 °C 대 150 °C). 높이 여유, 랜드 패턴, 열적 여유를 확인하십시오.
- DCR 최댓값은 같고(1.2 mΩ), 비슷한 40 °C 온도 상승 조건에서 온도 상승 전류도 같은 범위에 있습니다.