Bourns SRP1038A-R36M vs MAZO LPCA-1040-R36-M
Verdict: Close. Check your peak current and temperature first.
The MAZO part has the same inductance, the same DCR and the same pad span. It saturates earlier, its temperature limit is 25 °C lower and it has no AEC-Q200 statement.
| Bourns SRP1038A-R36M | MAZO LPCA-1040-R36-M | Result | |
|---|---|---|---|
| Inductance | 0.36 µH ±20 % @ 100 kHz, 1 V | 0.36 µH ±20 % @ 1 MHz, 1 V | Same value; test frequency differs |
| DCR typ / max | 1.05 / 1.2 mΩ | 1.05 / 1.2 mΩ | Same |
| Heating current | 31 A (40 °C rise) | 30 A typ (≈40 °C rise) | 1 A lower |
| Saturation current | 60 A (20 % L drop) | 50 A typ (≈30 % L drop) | Lower; about 40 A at a 20 % drop on the MAZO curve |
| Body | 11.0±0.5 × 10.0±0.3 × 3.8±0.2 mm | 11.5 max × 10.0±0.3 × 3.8±0.2 mm (4.0 max) | Same envelope |
| Land pattern | 2 pads 4.1 × 3.5 mm, gap 5.4, span 13.6 | 2 pads 4.1 × 4.1 mm, gap 5.4, span 13.6 | Same span and gap; MAZO pad 0.6 mm longer |
| Operating range (incl. self-heating) | −55 to +150 °C | −55 to +125 °C | 25 °C lower |
| AEC-Q200 | Compliant | Not stated | Missing |
MAZO LPCA-1040-R36-M
$0.53 /pc from 5 pcs
- 5–49 pcs: $0.53
- 50–149 pcs: $0.39
- 150–499 pcs: $0.324
- 500–2,999 pcs: $0.226
Same 0.36 µH, DCR and pad span. Keep peak current below about 40 A and the part at or below 125 °C.
MAZO VCMA-1040-R36-M-1A (AEC-Q200)
$0.52 /pc from 5 pcs
- 5–49 pcs: $0.52
- 50–149 pcs: $0.37
- 150–499 pcs: $0.302
For automotive designs: same body, AEC-Q200, Idc 32 A typ / 30 A max, Isat 54 A typ / 50 A max (≈30 % drop), −55 to +125 °C.
Power inductor selection guide · All MAZO power inductors
Not an equivalent or drop-in part. Verify efficiency, temperature rise and ripple in your circuit before you change the BOM. Freight, duties and tax are confirmed separately; transit time comes on top of dispatch preparation.
Key datasheet values (Bourns SRP1038A Series datasheet)
| Parameter | SRP1038A-R36M | Condition / note |
|---|---|---|
| Inductance | 0.36 µH ±20 % | @ 100 kHz / 1 V |
| Q (min.) | 15 | @ 100 kHz / 1 V |
| SRF | 105 MHz typ | |
| DCR | 1.05 mΩ typ, 1.2 mΩ max | |
| Irms | 31 A | Temperature rise 40 °C at rated Irms |
| Isat | 60 A | Inductance drops 20 % at Isat |
| Operating temperature | –55 °C to +150 °C | Temperature rise included |
| Storage temperature | –55 °C to +150 °C | |
| Dimensions | 11.0 ±0.5 × 10.0 ±0.3 mm, height 3.8 ±0.2 mm | |
| Core / terminal finish | Carbonyl powder core; Sn terminals | |
| Qualification | AEC-Q200 compliant; RoHS compliant, halogen free | |
| MSL | 1 | |
| Packaging | 500 pcs per 13-inch reel |
Cross-reference candidates in the MST store (to verify, not equivalents)

| Parameter | Bourns SRP1038A-R36M | MAZO LPCA-1040-R36-M | MAZO VCMA-1040-R36-M-1A |
|---|---|---|---|
| Inductance | 0.36 µH ±20 % @ 100 kHz, 1 V | 0.36 µH ±20 % @ 1 MHz, 1.0 V | 0.36 µH ±20 % @ 1 MHz, 1.0 V |
| DCR typ / max | 1.05 / 1.2 mΩ | 1.05 / 1.2 mΩ | 0.95 / 1.2 mΩ |
| Saturation current | 60 A (20 % drop) | 50 A typ (about 30 % drop) | 54 A typ, 50 A max column (about 30 % drop) |
| Heating current | 31 A (40 °C rise) | 30 A typ (about 40 °C rise) | 32 A typ, 30 A max column (about 40 °C rise) |
| Size | 11.0 × 10.0 × 3.8 mm | 11.5 × 10.3 × 4.0 mm max | 11.5 × 10.3 × 4.0 mm max |
| Operating temperature | –55 to +150 °C | –55 to +125 °C | –55 to +125 °C |
| AEC-Q200 | Yes | Not stated | Yes |
- Not equivalent on the datasheets. The saturation currents use different definitions (20 % vs about 30 % drop), so 60 A vs 50/54 A cannot be compared directly. Inductance is tested at different frequencies.
- The MAZO parts are larger and taller (4.0 mm max vs 3.8 ±0.2 mm), and their maximum operating temperature is lower (125 °C vs 150 °C). Check height clearance, land pattern and thermal margin.
- DCR maxima match (1.2 mΩ), and the heating currents are in the same range at a similar 40 °C rise.