LPCA-1040 discussions
LPCA-1040: 2 discussions. How to choose a power inductor: inductance, Isat vs Irms, DCR, shielding, size and AEC-Q200 (with MAZO datasheet values)
Need LPCA-1040? Let MST find it and quote
The part number and this page are pre-filled. Add your email and quantity; no account needed.
Can't find a part, or don't want to search? Tell MST
Describe what you need. MST checks sources and substitutes for you, and the thread stays useful to other engineers.
Prefer a direct quote? Send MST a sourcing RFQ for this part.
How to choose a power inductor: inductance, Isat vs Irms, DCR, shielding, size and AEC-Q200 (with MAZO datasheet values)
**Short answer:** Pick the inductance from the ripple you accept, then check three limits in order: saturation current (Isat) against the peak current, heating current (Irms, called Idc by MAZO) against the RMS current, and DCR and part tem
SRP1038A-R36M: Bourns 0.36 µH power inductor specs and MAZO candidates to verify
**Short answer:** SRP1038A-R36M is a Bourns SRP1038A-series shielded power inductor: 0.36 µH ±20 % (100 kHz, 1 V), DCR 1.05 mΩ typical / 1.2 mΩ maximum, Irms 31 A, Isat 60 A (20 % inductance drop), body 11.0 × 10.0 × 3.8 mm. Values below ar