Engineering community
Ask, answer and compare notes on components, consumables, MPW and equipment. Can't find a part? Post it and MST will source it for you.
Can't find a part, or don't want to search? Tell MST
Describe what you need. MST checks sources and substitutes for you, and the thread stays useful to other engineers.
Comparing MPW quotations: normalize fabrication, packaging and test before choosing a price
An MPW price is useful only when you know what it buys. A fabrication-only quote and a packaged-sample quote can look similar while leaving very different work for your team. Use this worksheet to compare the same deliverable and expose cos
CAMCLEAN 9 × 9 in cleanroom wipes: WIPER-609 vs CCW-1801 vs CCW-2201
**Short answer:** all three are 9 × 9 in (about 230 × 230 mm) and ship 10 bags per carton. WIPER-609 is a light cellulose/polyester nonwoven with the lowest listed cost per wipe. CCW-1801 and CCW-2201 are microfiber wipes at 180 and 220 g/m
AS568-012 O-rings: FFKM vs FKM 75A, and which Morisz grade for which seal
**Short answer:** AS568-012 is one size (ID 9.25 mm × CS 1.78 mm). The choice is the compound. FKM 75A covers general vacuum, gas and fluid seals up to about 205 °C. Plasma, aggressive chemistry or higher heat points to FFKM, and the MORISE
200 mm legacy equipment spare parts replacement checklist: AMAT, Lam and TEL consumables, part numbers and RFQs
**Short answer:** For a 200 mm Applied Materials, Lam Research or TEL tool, separate scheduled consumables (rings, liners, seals, pins, windows) from repairable spares (RF, pumps, robots, boards), quote the full OEM part number with revisio
MAWH automotive power inductors: how to decode MAWH-1054-330-M-5A and pick a MAZO size code
**Short answer:** MAWH-1054-330-M-5A is a Kun Shan MAZO Tech Co., Ltd. regular automotive molded power inductor: series MAWH, size code 1054 (11.5 × 10.3 × 5.4 mm), inductance 330 = 33 µH, tolerance M = ±20 %, and a -5A suffix that MAZO has
How to choose a power inductor: inductance, Isat vs Irms, DCR, shielding, size and AEC-Q200 (with MAZO datasheet values)
**Short answer:** Pick the inductance from the ripple you accept, then check three limits in order: saturation current (Isat) against the peak current, heating current (Irms, called Idc by MAZO) against the RMS current, and DCR and part tem
Open-cavity QFN die-fit check, step by step: die-attach area, cavity depth, pad count and pitch with real ALNP dimensions
**Short answer:** A die fits an open-cavity QFN when four checks pass. The die X and Y must be no larger than the nominal die-attach area. The die thickness plus attach material and wire-loop height must stay below the cavity depth. The die
O-ring failure modes in semiconductor tools: read the failed seal, then choose the elastomer by chemistry and temperature
**Short answer:** Before you reorder a failed O-ring, look at it in cross section. A ring with flat sides and no rebound has taken a compression set. Material squeezed into the clearance gap means extrusion. An oversized, soft ring has swel
QFN test socket selection, step by step: body size, pitch, exposed pad, lid style and the Plastronics QN sockets we list
**Short answer:** Pick a QFN socket by matching four things on your device drawing: lead count, body size, lead pitch and the exposed (thermal) pad. Then choose the lid style and confirm the use case. The same lead count can come in more th
Gel-Pak Gel-Box size comparison: AD-series outer size, usable gel area, clearance and how to pick a box and tack level
**Short answer:** Choose a Gel-Pak Gel-Box (AD series) in four steps. Make sure your devices fit the usable gel area with spacing, check that the tallest device clears the internal height, choose a base and lid material for your ESD needs,
Coilcraft XAL vs MAZO VCMA power inductors: a value-by-value cross-reference for XAL4020, XAL4030 and XAL6030
**Short answer:** For the inductance values the two families share, the closest MAZO candidate for a Coilcraft XAL4020 or XAL4030 is the VCMA-0420 series, and for an XAL6030 it is the VCMA-0630 series. The pairs below have the same nominal
- XAL4020-221MEC
- XAL4020-102
- XAL6030-102
- VCMA-0420-R22-M-1A
- VCMA-0420-1R0-M-1A
- XAL4020
- XAL4030
- VCMA-0420
- XAL6030
- VCMA-0630
- XAL40XX
- XAL60XX
- XAL4020-221
- XAL4020-122
- VCMA-0420-1R2-M-1A
- XAL4020-152
- VCMA-0420-1R5-M-1A
- XAL4020-222
- VCMA-0420-2R2-M-1A
- XAL4030-332
- VCMA-0420-3R3-M-1A
- XAL4030-472
- VCMA-0420-4R7-M-1A
- XAL4030-682
- VCMA-0420-6R8-M-1A
- XAL6030-331
- VCMA-0630-R33-M-1A
- XAL6030-561
- VCMA-0630-R56-M-1A
- VCMA-0630-1R0-M-1A
- XAL6030-222
- VCMA-0630-2R2-M-1A
- XAL6030-332
- VCMA-0630-3R3-M-1A
- XAL6030-181
- XAL6060
- XAL4000
AS568 O-ring sizes in 5 minutes: dash-number series, squeeze worked example and FKM vs FFKM choice
**Short answer:** An AS568 dash number fixes the inside diameter and the cross section, and the first digit gives the cross-section series. Material and hardness are specified separately. Size the ring from the groove, check the squeeze, th
Selecting FFKM AS568 O-rings for semiconductor tools: FFKM vs FKM vs EPDM, grade by process and RFQ checklist
**Short answer:** Use FFKM where a seal sees fluorine or oxygen plasma, temperatures above the roughly 204 °C limit of FKM, or chemicals that FKM does not tolerate, such as amines and ammonia. Choose the FFKM grade by process step, not just
How to choose an open-cavity IC package and matching lid: a 5-step summary with size tables
**Short answer:** Size the cavity from your die, choose the package family from the I/O count, match the pitch to your socket or board, check bond-finger pitch and plating, then pick the lid and seal method. Choose an adhesive (B-stage epox
Silicon parts: boat, ring and showerhead selection
**Select a silicon chamber part by its process, approved drawing and material requirements—not its photograph alone.** This guide helps buyers compare silicon boats, etch rings, showerheads and RTP guard rings, prepare an enquiry and agree
From MPW bare die to QFN samples: package fit, sample allocation and first-silicon test
Receiving bare dies is only one step toward measuring your first silicon. Before layout is frozen, connect the die outline and pad map to an assembly drawing, a package interface and a test plan. This guide uses a nominal QFN area check and
Wafer probe, final test or bench validation? A test-scope checklist for MPW prototypes
**Short answer:** wafer probe screens dies through their wafer-level contacts; final test checks packaged devices against an agreed production test program; bench validation investigates how first silicon behaves. They answer different ques
Morisz MPF506W vs Chemraz 513: four O-ring size candidates and material checks
Can Morisz MPF506W replace a Chemraz seal? The supplier has proposed four size candidates, but dimensions alone do not establish interchangeability. Use this guide to prepare a sample evaluation and a precise enquiry. MPF506W is a different
Starting an MPW project without final GDS: process, PDK and a quote-ready brief
Start an MPW project with a non-confidential brief: circuit purpose, essential process options, estimated die size, sample needs and dates. This can begin a feasibility discussion before final GDS exists. First establish whether a suitable
MPW tapeout handoff: match GDS, verification reports and the sample delivery timeline
“GDS uploaded” is not the same milestone as “design accepted,” and neither means samples are ready to test. A useful MPW handoff connects one frozen layout release to its verification evidence, owners and downstream packaging/test plan. Thi