AS568-010 O-Ring, FFKM (perfluoroelastomer) – 6.07 × 1.78 mm
- Category
- AS568 Standard O-Rings

Applications and selection tips
Typical applications
- Static seals in semiconductor process chambers exposed to plasma and aggressive chemistry
- Seals for high-temperature or broad-chemical service where FKM is not resistant enough
- Vacuum and gas-line seals on process tools
Industries
- Semiconductor equipment and fabs
- Chemical processing
- Laboratory and analytical equipment
Selection tips
- AS568-010 is a standard size, so the same dash number matches existing gland drawings.
- ID 0.239 ± 0.005 in (6.07 ± 0.13 mm), CS 0.070 ± 0.003 in (1.78 ± 0.08 mm): design the gland to the cross-section using the Parker O-Ring Handbook (ORD 5700) gland tables.
- Reference OD 0.379 in (9.63 mm) (ID + 2 × CS) for bore and housing checks.
- Parker ORD 5700 guidance: keep installed stretch on the ID low (about 5% or less) for static seals.
- FFKM compound and hardness are confirmed in the quotation; state your plasma chemistry, gases and peak temperature in the RFQ.
Specifications
Engineering guides for this part
More parts in this category
- AS568-006 O-Ring, FFKM (perfluoroelastomer) – 2.90 × 1.78 mm
- AS568-006 O-Ring, FKM 75A – 2.90 × 1.78 mm
- AS568-008 O-Ring, FFKM (perfluoroelastomer) – 4.47 × 1.78 mm
- AS568-008 O-Ring, FKM 75A – 4.47 × 1.78 mm
- AS568-010 O-Ring, FKM 75A – 6.07 × 1.78 mm
- AS568-012 O-Ring, FFKM (perfluoroelastomer) – 9.25 × 1.78 mm
- AS568-012 O-Ring, FKM 75A – 9.25 × 1.78 mm
- AS568-014 O-Ring, FFKM (perfluoroelastomer) – 12.42 × 1.78 mm
- AS568-014 O-Ring, FKM 75A – 12.42 × 1.78 mm
- AS568-016 O-Ring, FFKM (perfluoroelastomer) – 15.60 × 1.78 mm
- AS568-016 O-Ring, FKM 75A – 15.60 × 1.78 mm
- AS568-018 O-Ring, FFKM (perfluoroelastomer) – 18.77 × 1.78 mm
Price and lead time
- Minimum order
- Confirmed with quote
- Order multiple
- Confirmed with quote
- Availability
- Quoted on request
- Supply lead time
- Confirmed with quote
Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.
Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.
Compatible / Alternatives
Other AS568 listings near AS568-010 FFKM. Not an equivalence; check chemistry and temperature.
Same dash size, other materials
Selection and use
How to select
For a quotation, state
dash number or ID × CS, groove drawing, process media and temperature, vacuum level and bake-out, quantity and cleanroom packaging.
For vacuum chambers, specify the pressure range and bake-out temperature; outgassing data is requested for the exact compound and is not assumed here.
Typical applications
Frequently asked questions
What are the key specifications of AS568-010-FFKM?
AS568-010-FFKM: Standard: SAE AS568; Dash number: -010 (AS568-010, 2-010); Inside diameter (ID): 0.239 ± 0.005 in (6.07 ± 0.13 mm); Cross-section (CS): 0.070 ± 0.003 in (1.78 ± 0.08 mm); Outside diameter (reference, ID + 2 × CS): 0.379 in (9.63 mm); Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation. Full values are in the specifications table above.
How do I get a price for AS568-010-FFKM?
Price, availability and lead time for AS568-010-FFKM are confirmed by quotation. Send the quantity with the RFQ form on this page.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.