
Kurt J. Lesker QF25-100-C · Vacuum Fittings
Material: Aluminum · Connections: KF25 / QF25 · Size: 39.88 mm flange OD
An MST engineer will review your requirement and reply to help with sourcing and compatibility.
Showing 1–84 of 84

Kurt J. Lesker QF25-100-C · Vacuum Fittings
Material: Aluminum · Connections: KF25 / QF25 · Size: 39.88 mm flange OD

Greene Tweed Chemraz 513 · Seals & O-Rings
Material: FFKM · Reference temperature limit: 210 °C · Typical hardness: 80 Shore A (typical)

Swagelok SS-4-VCR-6-200 · Ultra-High-Purity Tubing & Fittings
Material: 316 SS · Connections: 1/4 in VCR × 1/8 in tube fitting

MORISEAL Morisz 5130UP FFKM O-rings — semiconductor material series
Dynamic sealing contact points in plasma environments · -5–250 °C · 80±5 HA · 22 % @ 200 °C / 70 h

MORISEAL Morisz MPF506UP FFKM O-rings — semiconductor material series
Specialty gas pipeline seals · -5–250 °C · 80±5 HA · 21 % @ 200 °C / 70 h

MORISEAL Morisz 6002UP FFKM O-rings — semiconductor material series
High-temperature seals exposed to water vapor, oxygen or ozone · 0–300 °C · 80±5 HA · 19 % @ 200 °C / 70 h

MORISEAL Morisz 5802SP FFKM O-rings — semiconductor material series
High-temperature seals exposed to water vapor, oxygen or ozone · 0–300 °C · 75±5 HA · 16 % @ 200 °C / 70 h

MORISEAL Morisz 6880SP FFKM O-rings — semiconductor material series
High-temperature plasma exposure while the seal is under mechanical stress · 0–315 °C · 80±5 HA · 17 % @ 200 °C / 70 h

MORISEAL Morisz 6880SZ FFKM O-rings — semiconductor material series
High-temperature plasma exposure while the seal is under mechanical stress · 0–315 °C · 80±5 HA · 9 % @ 200 °C / 70 h

MORISEAL Morisz N65 FFKM O-rings — semiconductor material series
Plasma sealing at elevated temperatures; confirm the duration at the upper limit · 0–330 °C · 75±5 HA · 11 % @ 200 °C / 70 h

MORISEAL Morisz ST50i FFKM O-rings — semiconductor material series
Low-temperature sealing; manufacturer also describes plasma and corrosive-media use · -45–200 °C · 65±5 HA · 24 % @ 200 °C / 70 h
AS568-006 O-Ring, FKM 75A – 2.90 × 1.78 mm
Inside diameter (ID): 2.90 mm (0.114 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-008 O-Ring, FKM 75A – 4.47 × 1.78 mm
Inside diameter (ID): 4.47 mm (0.176 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-010 O-Ring, FKM 75A – 6.07 × 1.78 mm
Inside diameter (ID): 6.07 mm (0.239 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-012 O-Ring, FKM 75A – 9.25 × 1.78 mm
Inside diameter (ID): 9.25 mm (0.364 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-014 O-Ring, FKM 75A – 12.42 × 1.78 mm
Inside diameter (ID): 12.42 mm (0.489 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-016 O-Ring, FKM 75A – 15.60 × 1.78 mm
Inside diameter (ID): 15.60 mm (0.614 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-018 O-Ring, FKM 75A – 18.77 × 1.78 mm
Inside diameter (ID): 18.77 mm (0.739 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-020 O-Ring, FKM 75A – 21.95 × 1.78 mm
Inside diameter (ID): 21.95 mm (0.864 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-022 O-Ring, FKM 75A – 25.12 × 1.78 mm
Inside diameter (ID): 25.12 mm (0.989 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-024 O-Ring, FKM 75A – 28.30 × 1.78 mm
Inside diameter (ID): 28.30 mm (1.114 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-026 O-Ring, FKM 75A – 31.47 × 1.78 mm
Inside diameter (ID): 31.47 mm (1.239 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-028 O-Ring, FKM 75A – 34.65 × 1.78 mm
Inside diameter (ID): 34.65 mm (1.364 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-030 O-Ring, FKM 75A – 41.00 × 1.78 mm
Inside diameter (ID): 41.00 mm (1.614 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-110 O-Ring, FKM 75A – 9.19 × 2.62 mm
Inside diameter (ID): 9.19 mm (0.362 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-112 O-Ring, FKM 75A – 12.37 × 2.62 mm
Inside diameter (ID): 12.37 mm (0.487 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-114 O-Ring, FKM 75A – 15.54 × 2.62 mm
Inside diameter (ID): 15.54 mm (0.612 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-116 O-Ring, FKM 75A – 18.72 × 2.62 mm
Inside diameter (ID): 18.72 mm (0.737 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-118 O-Ring, FKM 75A – 21.89 × 2.62 mm
Inside diameter (ID): 21.89 mm (0.862 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-120 O-Ring, FKM 75A – 25.07 × 2.62 mm
Inside diameter (ID): 25.07 mm (0.987 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-124 O-Ring, FKM 75A – 31.42 × 2.62 mm
Inside diameter (ID): 31.42 mm (1.237 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-128 O-Ring, FKM 75A – 37.77 × 2.62 mm
Inside diameter (ID): 37.77 mm (1.487 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-133 O-Ring, FKM 75A – 45.69 × 2.62 mm
Inside diameter (ID): 45.69 mm (1.799 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-138 O-Ring, FKM 75A – 53.64 × 2.62 mm
Inside diameter (ID): 53.64 mm (2.112 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-210 O-Ring, FKM 75A – 18.64 × 3.53 mm
Inside diameter (ID): 18.64 mm (0.734 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-214 O-Ring, FKM 75A – 24.99 × 3.53 mm
Inside diameter (ID): 24.99 mm (0.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-218 O-Ring, FKM 75A – 31.34 × 3.53 mm
Inside diameter (ID): 31.34 mm (1.234 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-222 O-Ring, FKM 75A – 37.69 × 3.53 mm
Inside diameter (ID): 37.69 mm (1.484 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-226 O-Ring, FKM 75A – 50.39 × 3.53 mm
Inside diameter (ID): 50.39 mm (1.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-230 O-Ring, FKM 75A – 63.09 × 3.53 mm
Inside diameter (ID): 63.09 mm (2.484 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-234 O-Ring, FKM 75A – 75.79 × 3.53 mm
Inside diameter (ID): 75.79 mm (2.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-325 O-Ring, FKM 75A – 37.47 × 5.33 mm
Inside diameter (ID): 37.47 mm (1.475 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-330 O-Ring, FKM 75A – 53.34 × 5.33 mm
Inside diameter (ID): 53.34 mm (2.100 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-335 O-Ring, FKM 75A – 69.22 × 5.33 mm
Inside diameter (ID): 69.22 mm (2.725 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-340 O-Ring, FKM 75A – 85.09 × 5.33 mm
Inside diameter (ID): 85.09 mm (3.350 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-345 O-Ring, FKM 75A – 100.97 × 5.33 mm
Inside diameter (ID): 100.97 mm (3.975 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A
AS568-350 O-Ring, FKM 75A – 116.84 × 5.33 mm
Inside diameter (ID): 116.84 mm (4.600 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FKM (fluoroelastomer), 75 Shore A

AS568-006 O-Ring, FFKM (perfluoroelastomer) – 2.90 × 1.78 mm
Inside diameter (ID): 2.90 mm (0.114 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-008 O-Ring, FFKM (perfluoroelastomer) – 4.47 × 1.78 mm
Inside diameter (ID): 4.47 mm (0.176 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-010 O-Ring, FFKM (perfluoroelastomer) – 6.07 × 1.78 mm
Inside diameter (ID): 6.07 mm (0.239 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-012 O-Ring, FFKM (perfluoroelastomer) – 9.25 × 1.78 mm
Inside diameter (ID): 9.25 mm (0.364 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-014 O-Ring, FFKM (perfluoroelastomer) – 12.42 × 1.78 mm
Inside diameter (ID): 12.42 mm (0.489 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-016 O-Ring, FFKM (perfluoroelastomer) – 15.60 × 1.78 mm
Inside diameter (ID): 15.60 mm (0.614 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-018 O-Ring, FFKM (perfluoroelastomer) – 18.77 × 1.78 mm
Inside diameter (ID): 18.77 mm (0.739 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-020 O-Ring, FFKM (perfluoroelastomer) – 21.95 × 1.78 mm
Inside diameter (ID): 21.95 mm (0.864 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-022 O-Ring, FFKM (perfluoroelastomer) – 25.12 × 1.78 mm
Inside diameter (ID): 25.12 mm (0.989 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-024 O-Ring, FFKM (perfluoroelastomer) – 28.30 × 1.78 mm
Inside diameter (ID): 28.30 mm (1.114 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-026 O-Ring, FFKM (perfluoroelastomer) – 31.47 × 1.78 mm
Inside diameter (ID): 31.47 mm (1.239 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-028 O-Ring, FFKM (perfluoroelastomer) – 34.65 × 1.78 mm
Inside diameter (ID): 34.65 mm (1.364 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-030 O-Ring, FFKM (perfluoroelastomer) – 41.00 × 1.78 mm
Inside diameter (ID): 41.00 mm (1.614 in) · Cross-section (CS): 1.78 mm (0.070 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-110 O-Ring, FFKM (perfluoroelastomer) – 9.19 × 2.62 mm
Inside diameter (ID): 9.19 mm (0.362 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-112 O-Ring, FFKM (perfluoroelastomer) – 12.37 × 2.62 mm
Inside diameter (ID): 12.37 mm (0.487 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-114 O-Ring, FFKM (perfluoroelastomer) – 15.54 × 2.62 mm
Inside diameter (ID): 15.54 mm (0.612 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-116 O-Ring, FFKM (perfluoroelastomer) – 18.72 × 2.62 mm
Inside diameter (ID): 18.72 mm (0.737 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-118 O-Ring, FFKM (perfluoroelastomer) – 21.89 × 2.62 mm
Inside diameter (ID): 21.89 mm (0.862 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-120 O-Ring, FFKM (perfluoroelastomer) – 25.07 × 2.62 mm
Inside diameter (ID): 25.07 mm (0.987 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-124 O-Ring, FFKM (perfluoroelastomer) – 31.42 × 2.62 mm
Inside diameter (ID): 31.42 mm (1.237 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-128 O-Ring, FFKM (perfluoroelastomer) – 37.77 × 2.62 mm
Inside diameter (ID): 37.77 mm (1.487 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-133 O-Ring, FFKM (perfluoroelastomer) – 45.69 × 2.62 mm
Inside diameter (ID): 45.69 mm (1.799 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-138 O-Ring, FFKM (perfluoroelastomer) – 53.64 × 2.62 mm
Inside diameter (ID): 53.64 mm (2.112 in) · Cross-section (CS): 2.62 mm (0.103 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-210 O-Ring, FFKM (perfluoroelastomer) – 18.64 × 3.53 mm
Inside diameter (ID): 18.64 mm (0.734 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-214 O-Ring, FFKM (perfluoroelastomer) – 24.99 × 3.53 mm
Inside diameter (ID): 24.99 mm (0.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-218 O-Ring, FFKM (perfluoroelastomer) – 31.34 × 3.53 mm
Inside diameter (ID): 31.34 mm (1.234 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-222 O-Ring, FFKM (perfluoroelastomer) – 37.69 × 3.53 mm
Inside diameter (ID): 37.69 mm (1.484 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-226 O-Ring, FFKM (perfluoroelastomer) – 50.39 × 3.53 mm
Inside diameter (ID): 50.39 mm (1.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-230 O-Ring, FFKM (perfluoroelastomer) – 63.09 × 3.53 mm
Inside diameter (ID): 63.09 mm (2.484 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-234 O-Ring, FFKM (perfluoroelastomer) – 75.79 × 3.53 mm
Inside diameter (ID): 75.79 mm (2.984 in) · Cross-section (CS): 3.53 mm (0.139 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-325 O-Ring, FFKM (perfluoroelastomer) – 37.47 × 5.33 mm
Inside diameter (ID): 37.47 mm (1.475 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-330 O-Ring, FFKM (perfluoroelastomer) – 53.34 × 5.33 mm
Inside diameter (ID): 53.34 mm (2.100 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-335 O-Ring, FFKM (perfluoroelastomer) – 69.22 × 5.33 mm
Inside diameter (ID): 69.22 mm (2.725 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-340 O-Ring, FFKM (perfluoroelastomer) – 85.09 × 5.33 mm
Inside diameter (ID): 85.09 mm (3.350 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-345 O-Ring, FFKM (perfluoroelastomer) – 100.97 × 5.33 mm
Inside diameter (ID): 100.97 mm (3.975 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation

AS568-350 O-Ring, FFKM (perfluoroelastomer) – 116.84 × 5.33 mm
Inside diameter (ID): 116.84 mm (4.600 in) · Cross-section (CS): 5.33 mm (0.210 in) · Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation
MORISEAL Morisz MPF506W FFKM O-rings — material datasheet and size enquiry
White FFKM material for semiconductor seal evaluation. Download the two-page supplier datasheet and enquire by grade, di · −10 to 250 °C · Supplier technical datasheet, 2 pages; no date or revision shown. Not a finished-part drawing.