| USR-DR301GWY-232-ETHUSR-IOT USR-DR301 DIN-rail RS-232 to Ethernet serial device server | See product detailsSelection and part-number notes- Interface match: USR-DR301 connects one RS-232 port to Ethernet. Select it by the equipment electrical interface and port count, then verify the connector pinout and power supply.
- Protocol check: Transparent serial tunnelling and Modbus RTU-to-TCP conversion are different operating modes. Confirm baud rate, parity, device addresses and the register or command map. Serial connectivity alone does not add SECS/GEM functions.
- Integration inputs: Provide the equipment model, wiring diagram, host protocol, network topology and installation environment. Check isolation, grounding and bus termination requirements for the installation.
| - Interface
- 1 × RS-232 (DB9); 1 × 10/100 Mbps Ethernet
- Voltage
- DC 5–36 V
- Dimensions
- DIN-rail housing
- Specification
- TCP/UDP/HTTP modes; Modbus RTU ↔ TCP
| View product and request a quoteProduct sources |
|---|
| USR-DR302GWY-485-ETHUSR-IOT USR-DR302 DIN-rail RS-485 to Ethernet serial device server | See product detailsSelection and part-number notes- Interface match: USR-DR302 connects one RS-485 port to Ethernet. Select it by the equipment electrical interface and port count, then verify the connector pinout and power supply.
- Protocol check: Transparent serial tunnelling and Modbus RTU-to-TCP conversion are different operating modes. Confirm baud rate, parity, device addresses and the register or command map. Serial connectivity alone does not add SECS/GEM functions.
- Integration inputs: Provide the equipment model, wiring diagram, host protocol, network topology and installation environment. Check isolation, grounding and bus termination requirements for the installation.
| - Interface
- 1 × RS-485 (terminal block); 1 × 10/100 Mbps Ethernet
- Voltage
- DC 5–36 V
- Temperature range
- −40 to 85 °C
- Dimensions
- DIN-rail housing
- Specification
- TCP/UDP/HTTP modes; Modbus RTU ↔ TCP
| View product and request a quoteProduct sources |
|---|
| USR-N520GWY-2P-ETHUSR-IOT USR-N520 2-port RS-232/485/422 serial device server | See product detailsSelection and part-number notes- Interface match: USR-N520 connects two serial ports with selectable RS-232/RS-485/RS-422 modes to Ethernet. Select it by the equipment electrical interface and port count, then verify the connector pinout and power supply.
- Protocol check: Transparent serial tunnelling and Modbus RTU-to-TCP conversion are different operating modes. Confirm baud rate, parity, device addresses and the register or command map. Serial connectivity alone does not add SECS/GEM functions.
- Integration inputs: Provide the equipment model, wiring diagram, host protocol, network topology and installation environment. Check isolation, grounding and bus termination requirements for the installation.
| - Interface
- 2 × RS-232/485/422 (selectable per port); 1 × 10/100 Mbps Ethernet
- Channels
- 2
- Specification
- Modbus RTU ↔ TCP; wall or DIN-rail mount
| View product and request a quoteProduct sources |
|---|
| USR-N510GWY-MODBUSUSR-IOT USR-N510 1-port serial device server with Modbus RTU/TCP gateway mode | See product detailsSelection and part-number notes- Interface match: USR-N510 connects one serial port with selectable RS-232/RS-485/RS-422 modes to Ethernet. Select it by the equipment electrical interface and port count, then verify the connector pinout and power supply.
- Protocol check: Transparent serial tunnelling and Modbus RTU-to-TCP conversion are different operating modes. Confirm baud rate, parity, device addresses and the register or command map. Serial connectivity alone does not add SECS/GEM functions.
- Integration inputs: Provide the equipment model, wiring diagram, host protocol, network topology and installation environment. Check isolation, grounding and bus termination requirements for the installation.
| - Interface
- 1 × RS-232/485/422 (selectable); 1 × 10/100 Mbps Ethernet
- Channels
- 1
- Specification
- Modbus RTU ↔ Modbus TCP gateway mode; wall or DIN-rail mount
| View product and request a quoteProduct sources |
|---|
| 23949GWY-USB-485Waveshare USB to RS485/422 isolated converter (15 kV ESD, 600 W TVS) | See product detailsSelection and part-number notes- Interface match: Waveshare 23949 connects a USB host to RS-485 or RS-422 terminals. Check the selected wiring mode, host driver, baud rate and the equipment protocol before connecting.
- Protection ratings: The listed 15 kV figure is an ESD rating and 600 W refers to transient protection. Neither is a continuous operating voltage or a system-level safety certification. Confirm the isolation rating for your installation.
- Bus setup: Confirm polarity, signal reference, cable length and termination. The onboard 120 Ω termination is jumper-selectable; enable it only where the bus layout requires it.
| - Interface
- USB type B; RS-485 / RS-422 (terminal block)
- Specification
- Power and signal isolation; 15 kV ESD; 600 W TVS; FT232RL/RNL + SP485EEN
- Dimensions
- ABS case, rail or wall mount
| View product and request a quoteProduct sources |
|---|