Applications and selection tips
Typical applications
- General vacuum, gas and fluid static seals
- Seals exposed to oils, fuels and many chemicals
- Lower-cost alternative where FFKM chemistry resistance is not required
Industries
- Industrial equipment
- Vacuum systems
- Fluid handling
Selection tips
- AS568-026 is a standard size, so the same dash number matches existing gland drawings.
- ID 1.239 ± 0.011 in (31.47 ± 0.28 mm), CS 0.070 ± 0.003 in (1.78 ± 0.08 mm): design the gland to the cross-section using the Parker O-Ring Handbook (ORD 5700) gland tables.
- Reference OD 1.379 in (35.03 mm) (ID + 2 × CS) for bore and housing checks.
- Parker ORD 5700 guidance: keep installed stretch on the ID low (about 5% or less) for static seals.
- Compound and hardness are confirmed in the quotation; state the media and temperature range in the RFQ.
Specifications
Engineering guides for this part
More parts in this category
- AS568-020 O-Ring, FKM 75A – 21.95 × 1.78 mm
- AS568-022 O-Ring, FFKM (perfluoroelastomer) – 25.12 × 1.78 mm
- AS568-022 O-Ring, FKM 75A – 25.12 × 1.78 mm
- AS568-024 O-Ring, FFKM (perfluoroelastomer) – 28.30 × 1.78 mm
- AS568-024 O-Ring, FKM 75A – 28.30 × 1.78 mm
- AS568-026 O-Ring, FFKM (perfluoroelastomer) – 31.47 × 1.78 mm
- AS568-028 O-Ring, FFKM (perfluoroelastomer) – 34.65 × 1.78 mm
- AS568-028 O-Ring, FKM 75A – 34.65 × 1.78 mm
- AS568-030 O-Ring, FFKM (perfluoroelastomer) – 41.00 × 1.78 mm
- AS568-030 O-Ring, FKM 75A – 41.00 × 1.78 mm
- AS568-110 O-Ring, FFKM (perfluoroelastomer) – 9.19 × 2.62 mm
- AS568-110 O-Ring, FKM 75A – 9.19 × 2.62 mm
Price and lead time
- Minimum order
- Confirmed with quote
- Order multiple
- Confirmed with quote
- Availability
- Quoted on request
- Supply lead time
- Confirmed with quote
Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.
Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.
Compatible / Alternatives
Other AS568 listings near AS568-026 FKM75. Not an equivalence; check chemistry and temperature.
Same dash size, other materials
Adjacent dash sizes, same material
Selection and use
How to select
For a quotation, state
dash number or ID × CS, groove drawing, process media and temperature, vacuum level and bake-out, quantity and cleanroom packaging.
For vacuum chambers, specify the pressure range and bake-out temperature; outgassing data is requested for the exact compound and is not assumed here.
Typical applications
Frequently asked questions
What are the key specifications of AS568-026?
AS568-026: Standard: SAE AS568; Dash number: -026 (AS568-026, 2-026); Inside diameter (ID): 1.239 ± 0.011 in (31.47 ± 0.28 mm); Cross-section (CS): 0.070 ± 0.003 in (1.78 ± 0.08 mm); Outside diameter (reference, ID + 2 × CS): 1.379 in (35.03 mm); Material: FKM (fluoroelastomer), 75 Shore A. Full values are in the specifications table above.
How do I get a price for AS568-026?
Price, availability and lead time for AS568-026 are confirmed by quotation. Send the quantity with the RFQ form on this page.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.