AS568-350 O-Ring, FFKM (perfluoroelastomer) – 116.84 × 5.33 mm
- Category
- AS568 Standard O-Rings

Applications and selection tips
Typical applications
- Static seals in semiconductor process chambers exposed to plasma and aggressive chemistry
- Seals for high-temperature or broad-chemical service where FKM is not resistant enough
- Vacuum and gas-line seals on process tools
Industries
- Semiconductor equipment and fabs
- Chemical processing
- Laboratory and analytical equipment
Selection tips
- AS568-350 is a standard size, so the same dash number matches existing gland drawings.
- ID 4.600 ± 0.030 in (116.84 ± 0.76 mm), CS 0.210 ± 0.005 in (5.33 ± 0.13 mm): design the gland to the cross-section using the Parker O-Ring Handbook (ORD 5700) gland tables.
- Reference OD 5.020 in (127.50 mm) (ID + 2 × CS) for bore and housing checks.
- Parker ORD 5700 guidance: keep installed stretch on the ID low (about 5% or less) for static seals.
- FFKM compound and hardness are confirmed in the quotation; state your plasma chemistry, gases and peak temperature in the RFQ.
Specifications
Engineering guides for this part
More parts in this category
- AS568-234 O-Ring, FKM 75A – 75.79 × 3.53 mm
- AS568-325 O-Ring, FFKM (perfluoroelastomer) – 37.47 × 5.33 mm
- AS568-325 O-Ring, FKM 75A – 37.47 × 5.33 mm
- AS568-330 O-Ring, FFKM (perfluoroelastomer) – 53.34 × 5.33 mm
- AS568-330 O-Ring, FKM 75A – 53.34 × 5.33 mm
- AS568-335 O-Ring, FFKM (perfluoroelastomer) – 69.22 × 5.33 mm
- AS568-335 O-Ring, FKM 75A – 69.22 × 5.33 mm
- AS568-340 O-Ring, FFKM (perfluoroelastomer) – 85.09 × 5.33 mm
- AS568-340 O-Ring, FKM 75A – 85.09 × 5.33 mm
- AS568-345 O-Ring, FFKM (perfluoroelastomer) – 100.97 × 5.33 mm
- AS568-345 O-Ring, FKM 75A – 100.97 × 5.33 mm
- AS568-350 O-Ring, FKM 75A – 116.84 × 5.33 mm
Price and lead time
- Minimum order
- Confirmed with quote
- Order multiple
- Confirmed with quote
- Availability
- Quoted on request
- Supply lead time
- Confirmed with quote
Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.
Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.
Compatible / Alternatives
Other AS568 listings near AS568-350 FFKM. Not an equivalence; check chemistry and temperature.
Same dash size, other materials
Adjacent dash sizes, same material
Selection and use
How to select
For a quotation, state
dash number or ID × CS, groove drawing, process media and temperature, vacuum level and bake-out, quantity and cleanroom packaging.
For vacuum chambers, specify the pressure range and bake-out temperature; outgassing data is requested for the exact compound and is not assumed here.
Typical applications
Frequently asked questions
What are the key specifications of AS568-350-FFKM?
AS568-350-FFKM: Standard: SAE AS568; Dash number: -350 (AS568-350, 2-350); Inside diameter (ID): 4.600 ± 0.030 in (116.84 ± 0.76 mm); Cross-section (CS): 0.210 ± 0.005 in (5.33 ± 0.13 mm); Outside diameter (reference, ID + 2 × CS): 5.020 in (127.50 mm); Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation. Full values are in the specifications table above.
How do I get a price for AS568-350-FFKM?
Price, availability and lead time for AS568-350-FFKM are confirmed by quotation. Send the quantity with the RFQ form on this page.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.