MST
RFQ cartCart

Typical applications, industries and selection tips

Typical applications

  • Die assembly and wire-bond prototyping of bare dies
  • Packaging MPW / shuttle dies for evaluation and characterization
  • Failure analysis and re-packaging of decapsulated dies

Industries

  • Design houses
  • Semiconductor startups
  • Equipment vendors
  • Suppliers entering fab supply chains

Selection tips

  • Start from the die: it must fit the nominal die-attach area listed on each part page.
  • Identify which component and datum each cavity dimension describes. Check die thickness, die-attach bond line, wire-loop height and lid clearance on the assembled section drawing.
  • Pitches in the catalogue are 0.4, 0.5, 0.65, 0.7, 0.8 and 1.0 mm; match your bond-pad count and wire-bond tool.
  • Plastic QFN cavity packages suit fast prototyping; HTCC ceramic QFN, CSOP and CSMD bodies suit ceramic-body requirements.
  • Compare the package and lid drawings for the seal interface and assembled clearance; body size alone does not confirm a matching lid.
MST engineering note, computed from the published specifications above. Request a quote.

Can't find it? We'll source it — and check it fits.

An MST engineer will review your requirement and reply to help with sourcing and compatibility.

Request sourcing & fit check

Empty IC packages: air-cavity QFN and ceramic

43 products

Showing 1–43 of 43

4 products · final price and lead time on quote
REFERENCE PRICE · QUOTESupplier rendering · not a photoALNP-48-7-5 — Supplier rendering · not a photo

ALNP-48-7-5 empty QFN48 LCP package, 7 x 7 mm

Reference unit prices by quoted lot: 10 pcs: USD 14.64/pc; 50 pcs: USD 12.16/pc. Quantities are quote bases, not confirm · 48 terminals on a 7 x 7 mm body, with 0.5 mm terminal pitch. · 5.2 x 5.2 mm nominal die-attach area and 0.65 mm cavity depth.

$14.64USD reference price · Nov 9, 2026 · final price on quote
Minimum order Confirmed with quoteSupply lead time Confirmed with quote
REFERENCE PRICE · QUOTESupplier rendering · not a photoALNP-48-7-5H — Supplier rendering · not a photo

ALNP-48-7-5H empty plastic qfn package, 7.00 x 7.00 mm

Reference unit prices by quoted lot: 10 pcs: USD 14.64/pc; 50 pcs: USD 12.16/pc. Quantities are quote bases, not confirm · ALNP-48-7-5H · 7.00 x 7.00 mm. · connection count 48; pitch 0.5 mm; cavity depth 1.25 mm; body thickness 1.45 mm.

$14.64USD reference price · Nov 9, 2026 · final price on quote
Minimum order Confirmed with quoteSupply lead time Confirmed with quote
REFERENCE PRICE · QUOTESupplier rendering · not a photoALNP-100-12-4H — Supplier rendering · not a photo

ALNP-100-12-4H empty plastic qfn package, 12.00 x 12.00 mm

Reference unit prices by quoted lot: 50 pcs: USD 21.39/pc. Quantities are quote bases, not confirmed stock. Final quanti · ALNP-100-12-4H · 12.00 x 12.00 mm. · connection count 100; pitch 0.4 mm; cavity depth 1.25 mm; nominal die-attach area 9.00 x 9.00 mm.

$21.39USD reference price · Nov 9, 2026 · final price on quote
Minimum order Confirmed with quoteSupply lead time Confirmed with quote
REFERENCE PRICE · QUOTESupplier series photo · representativeALNC-48-7-5C — Supplier series photo · representative

ALNC-48-7-5C empty htcc ceramic qfn48 package, 7.00 x 7.00 mm

Reference unit prices by quoted lot: 10 pcs: USD 16.89/pc; 50 pcs: USD 14.64/pc. Quantities are quote bases, not confirm · ALNC-48-7-5C · 7.00 x 7.00 mm. · connection count 48; pitch 0.5 mm; cavity depth 0.5 mm; body thickness 0.8 mm.

$16.89USD reference price · Nov 9, 2026 · final price on quote
Minimum order Confirmed with quoteSupply lead time Confirmed with quote

Products

Ask for a quote and we confirm the price before you order
PRICE ON QUOTESupplier rendering · not a photoALNP-8-3-6.5 — Supplier rendering · not a photo

ALNP-8-3-6.5 empty plastic qfn package, 3.00 x 3.00 mm

ALNP-8-3-6.5 · 3.00 x 3.00 mm. · connection count 8; pitch 0.65 mm; cavity depth 0.65 mm; nominal die-attach area 1.36 x 1.36 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-12-3-5 — Supplier rendering · not a photo

ALNP-12-3-5 empty plastic qfn package, 3.00 x 3.00 mm

ALNP-12-3-5 · 3.00 x 3.00 mm. · connection count 12; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 1.36 x 1.36 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-12-3-6.5 — Supplier rendering · not a photo

ALNP-12-3-6.5 empty plastic qfn package, 3.00 x 3.00 mm

ALNP-12-3-6.5 · 3.00 x 3.00 mm. · connection count 12; pitch 0.65 mm; cavity depth 0.65 mm; nominal die-attach area 1.36 x 1.36 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-16-3-5 — Supplier rendering · not a photo

ALNP-16-3-5 empty plastic qfn package, 3.00 x 3.00 mm

ALNP-16-3-5 · 3.00 x 3.00 mm. · connection count 16; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 1.36 x 1.36 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-12-4-6.5 — Supplier rendering · not a photo

ALNP-12-4-6.5 empty plastic qfn package, 4.00 x 4.00 mm

ALNP-12-4-6.5 · 4.00 x 4.00 mm. · connection count 12; pitch 0.65 mm; cavity depth 0.65 mm; nominal die-attach area 2.30 x 2.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-16-4-6.5 — Supplier rendering · not a photo

ALNP-16-4-6.5 empty plastic qfn package, 4.00 x 4.00 mm

ALNP-16-4-6.5 · 4.00 x 4.00 mm. · connection count 16; pitch 0.65 mm; cavity depth 0.65 mm; nominal die-attach area 2.30 x 2.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-20-4-5 — Supplier rendering · not a photo

ALNP-20-4-5 empty plastic qfn package, 4.00 x 4.00 mm

ALNP-20-4-5 · 4.00 x 4.00 mm. · connection count 20; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 2.30 x 2.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-24-4-5 — Supplier rendering · not a photo

ALNP-24-4-5 empty plastic qfn package, 4.00 x 4.00 mm

ALNP-24-4-5 · 4.00 x 4.00 mm. · connection count 24; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 2.30 x 2.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-28-4-4 — Supplier rendering · not a photo

ALNP-28-4-4 empty plastic qfn package, 4.00 x 4.00 mm

ALNP-28-4-4 · 4.00 x 4.00 mm. · connection count 28; pitch 0.4 mm; cavity depth 0.65 mm; nominal die-attach area 2.30 x 2.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-28-5-5 — Supplier rendering · not a photo

ALNP-28-5-5 empty plastic qfn package, 5.00 x 5.00 mm

ALNP-28-5-5 · 5.00 x 5.00 mm. · connection count 28; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 3.30 x 3.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-32-5-5 — Supplier rendering · not a photo

ALNP-32-5-5 empty plastic qfn package, 5.00 x 5.00 mm

ALNP-32-5-5 · 5.00 x 5.00 mm. · connection count 32; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 3.30 x 3.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-32-5-5H — Supplier rendering · not a photo

ALNP-32-5-5H empty plastic qfn package, 5.00 x 5.00 mm

ALNP-32-5-5H · 5.00 x 5.00 mm. · connection count 32; pitch 0.5 mm; cavity depth 1.25 mm; nominal die-attach area 3.30 x 3.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-40-5-4 — Supplier rendering · not a photo

ALNP-40-5-4 empty plastic qfn package, 5.00 x 5.00 mm

ALNP-40-5-4 · 5.00 x 5.00 mm. · connection count 40; pitch 0.4 mm; cavity depth 0.65 mm; nominal die-attach area 3.30 x 3.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-36-6-5 — Supplier rendering · not a photo

ALNP-36-6-5 empty plastic qfn package, 6.00 x 6.00 mm

ALNP-36-6-5 · 6.00 x 6.00 mm. · connection count 36; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 4.24 x 4.24 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-40-6-5H — Supplier rendering · not a photo

ALNP-40-6-5H empty plastic qfn package, 6.00 x 6.00 mm

ALNP-40-6-5H · 6.00 x 6.00 mm. · connection count 40; pitch 0.5 mm; cavity depth 1.25 mm; nominal die-attach area 4.24 x 4.24 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-40-6-5F — Supplier rendering · not a photo

ALNP-40-6-5F empty plastic qfn package, 6.00 x 6.00 mm

ALNP-40-6-5F · 6.00 x 6.00 mm. · connection count 40; pitch 0.5 mm; cavity depth 0.25 mm; nominal die-attach area 4.24 x 4.24 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-24-7-10 — Supplier rendering · not a photo

ALNP-24-7-10 empty plastic qfn package, 7.00 x 7.00 mm

ALNP-24-7-10 · 7.00 x 7.00 mm. · connection count 24; pitch 1 mm; cavity depth 0.65 mm; nominal die-attach area 5.20 x 5.20 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-44-7-5 — Supplier rendering · not a photo

ALNP-44-7-5 empty plastic qfn package, 7.00 x 7.00 mm

ALNP-44-7-5 · 7.00 x 7.00 mm. · connection count 44; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 5.20 x 5.20 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-32-8-8 — Supplier rendering · not a photo

ALNP-32-8-8 empty plastic qfn package, 8.00 x 8.00 mm

ALNP-32-8-8 · 8.00 x 8.00 mm. · connection count 32; pitch 0.8 mm; cavity depth 0.65 mm; nominal die-attach area 6.04 x 6.04 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-56-8-5H — Supplier rendering · not a photo

ALNP-56-8-5H empty plastic qfn package, 8.00 x 8.00 mm

ALNP-56-8-5H · 8.00 x 8.00 mm. · connection count 56; pitch 0.5 mm; cavity depth 1.25 mm; nominal die-attach area 6.04 x 6.04 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-44-9-6.5 — Supplier rendering · not a photo

ALNP-44-9-6.5 empty plastic qfn package, 9.00 x 9.00 mm

ALNP-44-9-6.5 · 9.00 x 9.00 mm. · connection count 44; pitch 0.65 mm; cavity depth 0.65 mm; nominal die-attach area 6.90 x 6.90 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-64-9-5H — Supplier rendering · not a photo

ALNP-64-9-5H empty plastic qfn package, 9.00 x 9.00 mm

ALNP-64-9-5H · 9.00 x 9.00 mm. · connection count 64; pitch 0.5 mm; cavity depth 1.25 mm; nominal die-attach area 6.90 x 6.90 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-72-10-5 — Supplier rendering · not a photo

ALNP-72-10-5 empty plastic qfn package, 10.00 x 10.00 mm

ALNP-72-10-5 · 10.00 x 10.00 mm. · connection count 72; pitch 0.5 mm; cavity depth 0.65 mm; nominal die-attach area 7.80 x 7.80 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-88-10-4 — Supplier rendering · not a photo

ALNP-88-10-4 empty plastic qfn package, 10.00 x 10.00 mm

ALNP-88-10-4 · 10.00 x 10.00 mm. · connection count 88; pitch 0.4 mm; cavity depth 0.65 mm; nominal die-attach area 7.80 x 7.80 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNP-96-10-4 — Supplier rendering · not a photo

ALNP-96-10-4 empty plastic qfn package, 10.00 x 10.00 mm

ALNP-96-10-4 · 10.00 x 10.00 mm. · connection count 96; pitch 0.4 mm; cavity depth 0.65 mm; nominal die-attach area 7.80 x 7.80 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSMD-2-0.1 — Supplier series photo · representative

CSMD-2-0.1 empty htcc csmd ceramic package, 6.00 x 3.50 mm

CSMD-2-0.1 · 6.00 x 3.50 mm. · body thickness 2.8 mm; nominal die-attach area 2.40 x 2.40 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSMD-2-0.2 — Supplier series photo · representative

CSMD-2-0.2 empty htcc csmd ceramic package, 7.95 x 5.50 mm

CSMD-2-0.2 · 7.95 x 5.50 mm. · body thickness 2.45 mm; nominal die-attach area 3.20 x 3.00 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSMD-2-0.3 — Supplier series photo · representative

CSMD-2-0.3 empty htcc csmd ceramic package, 8.00 x 6.00 mm

CSMD-2-0.3 · 8.00 x 6.00 mm. · body thickness 4.2 mm; nominal die-attach area 4.50 x 4.50 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSMD-3-0.5 — Supplier series photo · representative

CSMD-3-0.5 empty htcc csmd ceramic package, 10.20 x 7.50 mm

CSMD-3-0.5 · 10.20 x 7.50 mm. · body thickness 3 mm; nominal die-attach area 5.40 x 4.05 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSMD-3-1.0 — Supplier series photo · representative

CSMD-3-1.0 empty htcc csmd ceramic package, 15.88 x 11.43 mm

CSMD-3-1.0 · 15.88 x 11.43 mm. · body thickness 3.2 mm; nominal die-attach area 8.40 x 8.20 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSOP-08B — Supplier series photo · representative

CSOP-08B empty htcc csop ceramic package, 11.00 x 11.00 mm

CSOP-08B · 11.00 x 11.00 mm. · connection count 8; nominal die-attach area 3.00 x 2.74 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSOP-08U — Supplier series photo · representative

CSOP-08U empty htcc csop ceramic package, 11.00 x 11.00 mm

CSOP-08U · 11.00 x 11.00 mm. · connection count 8; nominal die-attach area 3.00 x 2.74 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSOP-10L — Supplier series photo · representative

CSOP-10L empty htcc csop ceramic package, 12.50 x 12.25 mm

CSOP-10L · 12.50 x 12.25 mm. · connection count 10; nominal die-attach area 5.75 x 4.25 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSOP-14 — Supplier series photo · representative

CSOP-14 empty htcc csop ceramic package, 16.80 x 15.50 mm

CSOP-14 · 16.80 x 15.50 mm. · connection count 14; nominal die-attach area 4.50 x 2.40 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCSOP-24B — Supplier series photo · representative

CSOP-24B empty htcc csop ceramic package, 21.00 x 17.60 mm

CSOP-24B · 21.00 x 17.60 mm. · connection count 24; nominal die-attach area 6.90 x 4.30 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoBGA1313-256BALLS — Supplier rendering · not a photo

BGA1313-256balls empty bga cavity package, 13.00 x 13.00 mm

BGA1313-256BALLS: 13 × 13 mm empty cavity BGA, 256 balls, 0.7 mm pitch. · Review the connection count, pitch, die area and qualified depth entry in the specification table. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoBGA2020-512BALLS — Supplier rendering · not a photo

BGA2020-512balls empty bga cavity package, 20.00 x 20.00 mm

BGA2020-512BALLS: 20 × 20 mm empty cavity BGA, 512 balls, 0.7 mm pitch. · Review the connection count, pitch, die area and qualified depth entry in the specification table. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier rendering · not a photoALNC-144-20-5 — Supplier rendering · not a photo

ALNC-144-20-5 empty ic cavity package, 20.00 x 20.00 mm

ALNC-144-20-5 · 20.00 x 20.00 mm. · Review the connection count, pitch, die area and qualified depth entry in the specification table. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeCQFP144-01 — Supplier series photo · representative

CQFP144-01 empty ic cavity package, 19.00 x 19.00 mm

CQFP144-01 · 19.00 x 19.00 mm. · connection count 144; pitch 0.5 mm; cavity depth 1.5 mm; nominal die-attach area 12.00 x 12.00 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote

Compare specifications

Review model numbers, published specifications and reference documents together. Open a product for its complete data and current purchasing terms.

Showing 43 of 43 products

Values are reproduced from the published product data. A listed application is a selection reference; check the exact configuration for your equipment.
Model / material gradePublished application or usePublished specificationsPurchase or quote
ALNP-48-7-5ALNP-48-7-5 empty QFN48 LCP package, 7 x 7 mmAn empty cavity package for your bare-die assembly trial.
Selection and part-number notes
  • Reference unit prices by quoted lot: 10 pcs: USD 14.64/pc; 50 pcs: USD 12.16/pc. Quantities are quote bases, not confirmed stock. Final quantity, price and delivery are confirmed in your quotation.
  • Empty package body only; die, lid, socket and assembly are separate. International freight and import charges are extra. Request a quote for other quantities and the confirmed ship date.
  • What is supplied: An empty package body for die attach and wire bonding. A test socket makes temporary contact with an already packaged IC; a breakout adapter connects a packaged IC to a board. Neither replaces this empty package.
  • Will my bare die fit: Check die size and thickness, adhesive thickness, bond-pad layout, wire-loop height, cavity clearance and the lid with your assembly provider. The nominal die-attach area is not a guaranteed maximum die size.
  • Which bonding process: The current A0 drawing specifies die attach at or below 200 C and wire bonding at or below 100 C. Obtain a confirmed process window for your equipment and materials. Gold-wire trials were reported; aluminium and copper wire compatibility is not established.
  • Can I request 10 pieces: Yes. Start with the model, quantity, delivery country, die dimensions and whether a lid is needed. Final pricing, available quantity and dispatch date are confirmed in the quotation.
  • Need a smaller package: Share the required connection count and die/bond-pad layout. A smaller cavity package may shorten wire lengths, but pin count, clearances and assembly access still need checking.
  • Drawing and photo: The Dimensions tab is an MST dimension summary based on the manufacturer's A0 drawing. It is not a product photograph, PCB footprint or manufacturing drawing. Request the current manufacturer drawing before assembly.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Reference unit price (10 pcs)
USD 14.64/pc
Reference unit price (50 pcs)
USD 12.16/pc
Manufacturer model
ALNP-48-7-5
Package type
Empty open-cavity LCP QFN
Body size
7.00 x 7.00 mm
Terminals / pitch
48 / 0.50 mm
Body thickness
0.85 mm
Cavity depth
0.65 mm
Die-attach area
5.20 x 5.20 mm nominal
Conductor
Cu 194, nickel/gold plated
Drawing process limits
Die attach <= 200 C; wire bonding <= 100 C
Operating temperature
-50 to +105 C
Unspecified tolerance
+/- 0.1 mm per manufacturer drawing
Lid
Separate item; confirm lid and sealing process
Package
Empty LCP QFN48
Pin count
48
View product and request a quote
Product sources
ALNP-8-3-6.5ALNP-8-3-6.5 empty plastic qfn package, 3.00 x 3.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 3.00 x 3.00 mm. The die-attach area is 1.36 x 1.36 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-8-3-6.5
Type
Empty plastic QFN package
Body size
3.00 x 3.00 mm
Connection count
8
Pitch
0.65 mm
Cavity depth
0.65 mm
Nominal die-attach area
1.36 x 1.36 mm
Product family
Empty Ic Packages
Public SKU
ALNP-8-3-6.5
Display description
ALNP-8-3-6.5 empty plastic qfn package, 3.00 x 3.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-12-3-5ALNP-12-3-5 empty plastic qfn package, 3.00 x 3.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 3.00 x 3.00 mm. The die-attach area is 1.36 x 1.36 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-12-3-5
Type
Empty plastic QFN package
Body size
3.00 x 3.00 mm
Connection count
12
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
1.36 x 1.36 mm
Product family
Empty Ic Packages
Public SKU
ALNP-12-3-5
Display description
ALNP-12-3-5 empty plastic qfn package, 3.00 x 3.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-12-3-6.5ALNP-12-3-6.5 empty plastic qfn package, 3.00 x 3.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 3.00 x 3.00 mm. The die-attach area is 1.36 x 1.36 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-12-3-6.5
Type
Empty plastic QFN package
Body size
3.00 x 3.00 mm
Connection count
12
Pitch
0.65 mm
Cavity depth
0.65 mm
Nominal die-attach area
1.36 x 1.36 mm
Product family
Empty Ic Packages
Public SKU
ALNP-12-3-6.5
Display description
ALNP-12-3-6.5 empty plastic qfn package, 3.00 x 3.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-16-3-5ALNP-16-3-5 empty plastic qfn package, 3.00 x 3.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 3.00 x 3.00 mm. The die-attach area is 1.36 x 1.36 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-16-3-5
Type
Empty plastic QFN package
Body size
3.00 x 3.00 mm
Connection count
16
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
1.36 x 1.36 mm
Product family
Empty Ic Packages
Public SKU
ALNP-16-3-5
Display description
ALNP-16-3-5 empty plastic qfn package, 3.00 x 3.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-12-4-6.5ALNP-12-4-6.5 empty plastic qfn package, 4.00 x 4.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 4.00 x 4.00 mm. The die-attach area is 2.30 x 2.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-12-4-6.5
Type
Empty plastic QFN package
Body size
4.00 x 4.00 mm
Connection count
12
Pitch
0.65 mm
Cavity depth
0.65 mm
Nominal die-attach area
2.30 x 2.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-12-4-6.5
Display description
ALNP-12-4-6.5 empty plastic qfn package, 4.00 x 4.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-16-4-6.5ALNP-16-4-6.5 empty plastic qfn package, 4.00 x 4.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 4.00 x 4.00 mm. The die-attach area is 2.30 x 2.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-16-4-6.5
Type
Empty plastic QFN package
Body size
4.00 x 4.00 mm
Connection count
16
Pitch
0.65 mm
Cavity depth
0.65 mm
Nominal die-attach area
2.30 x 2.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-16-4-6.5
Display description
ALNP-16-4-6.5 empty plastic qfn package, 4.00 x 4.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-20-4-5ALNP-20-4-5 empty plastic qfn package, 4.00 x 4.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 4.00 x 4.00 mm. The die-attach area is 2.30 x 2.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-20-4-5
Type
Empty plastic QFN package
Body size
4.00 x 4.00 mm
Connection count
20
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
2.30 x 2.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-20-4-5
Display description
ALNP-20-4-5 empty plastic qfn package, 4.00 x 4.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-24-4-5ALNP-24-4-5 empty plastic qfn package, 4.00 x 4.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 4.00 x 4.00 mm. The die-attach area is 2.30 x 2.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-24-4-5
Type
Empty plastic QFN package
Body size
4.00 x 4.00 mm
Connection count
24
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
2.30 x 2.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-24-4-5
Display description
ALNP-24-4-5 empty plastic qfn package, 4.00 x 4.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-28-4-4ALNP-28-4-4 empty plastic qfn package, 4.00 x 4.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 4.00 x 4.00 mm. The die-attach area is 2.30 x 2.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-28-4-4
Type
Empty plastic QFN package
Body size
4.00 x 4.00 mm
Connection count
28
Pitch
0.4 mm
Cavity depth
0.65 mm
Nominal die-attach area
2.30 x 2.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-28-4-4
Display description
ALNP-28-4-4 empty plastic qfn package, 4.00 x 4.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-28-5-5ALNP-28-5-5 empty plastic qfn package, 5.00 x 5.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Drawing revision check required: the manufacturer’s public family table differs from the supplier catalog for this model. Do not use the nominal values for layout or assembly until the current model drawing is confirmed.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 5.00 x 5.00 mm. The die-attach area is 3.30 x 3.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-28-5-5
Type
Empty plastic QFN package
Body size
5.00 x 5.00 mm
Connection count
28
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
3.30 x 3.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-28-5-5
Display description
ALNP-28-5-5 empty plastic qfn package, 5.00 x 5.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-32-5-5ALNP-32-5-5 empty plastic qfn package, 5.00 x 5.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Drawing revision check required: the manufacturer’s public family table differs from the supplier catalog for this model. Do not use the nominal values for layout or assembly until the current model drawing is confirmed.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 5.00 x 5.00 mm. The die-attach area is 3.30 x 3.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-32-5-5
Type
Empty plastic QFN package
Body size
5.00 x 5.00 mm
Connection count
32
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
3.30 x 3.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-32-5-5
Display description
ALNP-32-5-5 empty plastic qfn package, 5.00 x 5.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-32-5-5HALNP-32-5-5H empty plastic qfn package, 5.00 x 5.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 5.00 x 5.00 mm. The die-attach area is 3.30 x 3.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-32-5-5H
Type
Empty plastic QFN package
Body size
5.00 x 5.00 mm
Connection count
32
Pitch
0.5 mm
Cavity depth
1.25 mm
Nominal die-attach area
3.30 x 3.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-32-5-5H
Display description
ALNP-32-5-5H empty plastic qfn package, 5.00 x 5.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-40-5-4ALNP-40-5-4 empty plastic qfn package, 5.00 x 5.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 5.00 x 5.00 mm. The die-attach area is 3.30 x 3.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-40-5-4
Type
Empty plastic QFN package
Body size
5.00 x 5.00 mm
Connection count
40
Pitch
0.4 mm
Cavity depth
0.65 mm
Nominal die-attach area
3.30 x 3.30 mm
Product family
Empty Ic Packages
Public SKU
ALNP-40-5-4
Display description
ALNP-40-5-4 empty plastic qfn package, 5.00 x 5.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-36-6-5ALNP-36-6-5 empty plastic qfn package, 6.00 x 6.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Drawing revision check required: the manufacturer’s public family table differs from the supplier catalog for this model. Do not use the nominal values for layout or assembly until the current model drawing is confirmed.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 6.00 x 6.00 mm. The die-attach area is 4.24 x 4.24 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-36-6-5
Type
Empty plastic QFN package
Body size
6.00 x 6.00 mm
Connection count
36
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
4.24 x 4.24 mm
Product family
Empty Ic Packages
Public SKU
ALNP-36-6-5
Display description
ALNP-36-6-5 empty plastic qfn package, 6.00 x 6.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-40-6-5HALNP-40-6-5H empty plastic qfn package, 6.00 x 6.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Drawing revision check required: the manufacturer’s public family table differs from the supplier catalog for this model. Do not use the nominal values for layout or assembly until the current model drawing is confirmed.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 6.00 x 6.00 mm. The die-attach area is 4.24 x 4.24 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-40-6-5H
Type
Empty plastic QFN package
Body size
6.00 x 6.00 mm
Connection count
40
Pitch
0.5 mm
Cavity depth
1.25 mm
Nominal die-attach area
4.24 x 4.24 mm
Product family
Empty Ic Packages
Public SKU
ALNP-40-6-5H
Display description
ALNP-40-6-5H empty plastic qfn package, 6.00 x 6.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-40-6-5FALNP-40-6-5F empty plastic qfn package, 6.00 x 6.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 6.00 x 6.00 mm. The die-attach area is 4.24 x 4.24 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-40-6-5F
Type
Empty plastic QFN package
Body size
6.00 x 6.00 mm
Connection count
40
Pitch
0.5 mm
Cavity depth
0.25 mm
Nominal die-attach area
4.24 x 4.24 mm
Product family
Empty Ic Packages
Public SKU
ALNP-40-6-5F
Display description
ALNP-40-6-5F empty plastic qfn package, 6.00 x 6.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-24-7-10ALNP-24-7-10 empty plastic qfn package, 7.00 x 7.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 7.00 x 7.00 mm. The die-attach area is 5.20 x 5.20 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-24-7-10
Type
Empty plastic QFN package
Body size
7.00 x 7.00 mm
Connection count
24
Pitch
1 mm
Cavity depth
0.65 mm
Nominal die-attach area
5.20 x 5.20 mm
Product family
Empty Ic Packages
Public SKU
ALNP-24-7-10
Display description
ALNP-24-7-10 empty plastic qfn package, 7.00 x 7.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-44-7-5ALNP-44-7-5 empty plastic qfn package, 7.00 x 7.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 7.00 x 7.00 mm. The die-attach area is 5.20 x 5.20 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-44-7-5
Type
Empty plastic QFN package
Body size
7.00 x 7.00 mm
Connection count
44
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
5.20 x 5.20 mm
Product family
Empty Ic Packages
Public SKU
ALNP-44-7-5
Display description
ALNP-44-7-5 empty plastic qfn package, 7.00 x 7.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-48-7-5HALNP-48-7-5H empty plastic qfn package, 7.00 x 7.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Reference unit prices by quoted lot: 10 pcs: USD 14.64/pc; 50 pcs: USD 12.16/pc. Quantities are quote bases, not confirmed stock. Final quantity, price and delivery are confirmed in your quotation.
  • Empty package body only; die, lid, socket and assembly are separate. International freight and import charges are extra. Request a quote for other quantities and the confirmed ship date.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 7.00 x 7.00 mm. The die-attach area is 5.20 x 5.20 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Reference unit price (10 pcs)
USD 14.64/pc
Reference unit price (50 pcs)
USD 12.16/pc
Manufacturer model
ALNP-48-7-5H
Type
Empty plastic QFN package
Body size
7.00 x 7.00 mm
Connection count
48
Pitch
0.5 mm
Cavity depth
1.25 mm
Body thickness
1.45 mm
Nominal die-attach area
5.20 x 5.20 mm
Materials
LCP; Cu 194 with nickel/gold plating
Drawing process limits
Die attach <= 200 C; wire bonding <= 100 C
Operating temperature
-50 to +105 C
Closure
B-stage adhesive; lid separate
Product family
Empty Ic Packages
Public SKU
ALNP-48-7-5H
View product and request a quote
Product sources
ALNP-32-8-8ALNP-32-8-8 empty plastic qfn package, 8.00 x 8.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 8.00 x 8.00 mm. The die-attach area is 6.04 x 6.04 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-32-8-8
Type
Empty plastic QFN package
Body size
8.00 x 8.00 mm
Connection count
32
Pitch
0.8 mm
Cavity depth
0.65 mm
Nominal die-attach area
6.04 x 6.04 mm
Product family
Empty Ic Packages
Public SKU
ALNP-32-8-8
Display description
ALNP-32-8-8 empty plastic qfn package, 8.00 x 8.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-56-8-5HALNP-56-8-5H empty plastic qfn package, 8.00 x 8.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 8.00 x 8.00 mm. The die-attach area is 6.04 x 6.04 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-56-8-5H
Type
Empty plastic QFN package
Body size
8.00 x 8.00 mm
Connection count
56
Pitch
0.5 mm
Cavity depth
1.25 mm
Nominal die-attach area
6.04 x 6.04 mm
Product family
Empty Ic Packages
Public SKU
ALNP-56-8-5H
Display description
ALNP-56-8-5H empty plastic qfn package, 8.00 x 8.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-44-9-6.5ALNP-44-9-6.5 empty plastic qfn package, 9.00 x 9.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 9.00 x 9.00 mm. The die-attach area is 6.90 x 6.90 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-44-9-6.5
Type
Empty plastic QFN package
Body size
9.00 x 9.00 mm
Connection count
44
Pitch
0.65 mm
Cavity depth
0.65 mm
Nominal die-attach area
6.90 x 6.90 mm
Product family
Empty Ic Packages
Public SKU
ALNP-44-9-6.5
Display description
ALNP-44-9-6.5 empty plastic qfn package, 9.00 x 9.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-64-9-5HALNP-64-9-5H empty plastic qfn package, 9.00 x 9.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 9.00 x 9.00 mm. The die-attach area is 6.90 x 6.90 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-64-9-5H
Type
Empty plastic QFN package
Body size
9.00 x 9.00 mm
Connection count
64
Pitch
0.5 mm
Cavity depth
1.25 mm
Nominal die-attach area
6.90 x 6.90 mm
Product family
Empty Ic Packages
Public SKU
ALNP-64-9-5H
Display description
ALNP-64-9-5H empty plastic qfn package, 9.00 x 9.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-72-10-5ALNP-72-10-5 empty plastic qfn package, 10.00 x 10.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 10.00 x 10.00 mm. The die-attach area is 7.80 x 7.80 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-72-10-5
Type
Empty plastic QFN package
Body size
10.00 x 10.00 mm
Connection count
72
Pitch
0.5 mm
Cavity depth
0.65 mm
Nominal die-attach area
7.80 x 7.80 mm
Product family
Empty Ic Packages
Public SKU
ALNP-72-10-5
Display description
ALNP-72-10-5 empty plastic qfn package, 10.00 x 10.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-88-10-4ALNP-88-10-4 empty plastic qfn package, 10.00 x 10.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 10.00 x 10.00 mm. The die-attach area is 7.80 x 7.80 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-88-10-4
Type
Empty plastic QFN package
Body size
10.00 x 10.00 mm
Connection count
88
Pitch
0.4 mm
Cavity depth
0.65 mm
Nominal die-attach area
7.80 x 7.80 mm
Product family
Empty Ic Packages
Public SKU
ALNP-88-10-4
Display description
ALNP-88-10-4 empty plastic qfn package, 10.00 x 10.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-96-10-4ALNP-96-10-4 empty plastic qfn package, 10.00 x 10.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 10.00 x 10.00 mm. The die-attach area is 7.80 x 7.80 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNP-96-10-4
Type
Empty plastic QFN package
Body size
10.00 x 10.00 mm
Connection count
96
Pitch
0.4 mm
Cavity depth
0.65 mm
Nominal die-attach area
7.80 x 7.80 mm
Product family
Empty Ic Packages
Public SKU
ALNP-96-10-4
Display description
ALNP-96-10-4 empty plastic qfn package, 10.00 x 10.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNP-100-12-4HALNP-100-12-4H empty plastic qfn package, 12.00 x 12.00 mmEmpty plastic QFN package for prototype assembly.
Selection and part-number notes
  • Reference unit prices by quoted lot: 50 pcs: USD 21.39/pc. Quantities are quote bases, not confirmed stock. Final quantity, price and delivery are confirmed in your quotation.
  • Empty package body only; die, lid, socket and assembly are separate. International freight and import charges are extra. Request a quote for other quantities and the confirmed ship date.
  • Die clearance: the nominal die-attach area is 9.0 × 9.0 mm; the supplier recommends a die no larger than 8.7 × 8.7 mm. Confirm thickness, wire-loop clearance and the current package drawing before assembly.
  • What is supplied: Empty plastic QFN package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 12.00 x 12.00 mm. The die-attach area is 9.00 x 9.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Deeper cavity: This model has 1.25 mm nominal cavity depth. Do not substitute the standard-depth part without checking lid clearance and wire bonding access.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Reference unit price (50 pcs)
USD 21.39/pc
Manufacturer model
ALNP-100-12-4H
Type
Empty plastic QFN package
Body size
12.00 x 12.00 mm
Connection count
100
Pitch
0.4 mm
Cavity depth
1.25 mm
Nominal die-attach area
9.00 x 9.00 mm
Product family
Empty Ic Packages
Public SKU
ALNP-100-12-4H
Display description
ALNP-100-12-4H empty plastic qfn package, 12.00 x 12.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
Confirmed in quotation
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSMD-2-0.1CSMD-2-0.1 empty htcc csmd ceramic package, 6.00 x 3.50 mmEmpty HTCC CSMD ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSMD ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 6.00 x 3.50 mm. The die-attach area is 2.40 x 2.40 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSMD-2-0.1
Type
Empty HTCC CSMD ceramic package
Body size
6.00 x 3.50 mm
Body thickness
2.8 mm
Nominal die-attach area
2.40 x 2.40 mm
Product family
Empty Ic Packages
Public SKU
CSMD-2-0.1
Display description
CSMD-2-0.1 empty htcc csmd ceramic package, 6.00 x 3.50 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSMD-2-0.2CSMD-2-0.2 empty htcc csmd ceramic package, 7.95 x 5.50 mmEmpty HTCC CSMD ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSMD ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 7.95 x 5.50 mm. The die-attach area is 3.20 x 3.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSMD-2-0.2
Type
Empty HTCC CSMD ceramic package
Body size
7.95 x 5.50 mm
Body thickness
2.45 mm
Nominal die-attach area
3.20 x 3.00 mm
Product family
Empty Ic Packages
Public SKU
CSMD-2-0.2
Display description
CSMD-2-0.2 empty htcc csmd ceramic package, 7.95 x 5.50 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSMD-2-0.3CSMD-2-0.3 empty htcc csmd ceramic package, 8.00 x 6.00 mmEmpty HTCC CSMD ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSMD ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 8.00 x 6.00 mm. The die-attach area is 4.50 x 4.50 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSMD-2-0.3
Type
Empty HTCC CSMD ceramic package
Body size
8.00 x 6.00 mm
Body thickness
4.2 mm
Nominal die-attach area
4.50 x 4.50 mm
Product family
Empty Ic Packages
Public SKU
CSMD-2-0.3
Display description
CSMD-2-0.3 empty htcc csmd ceramic package, 8.00 x 6.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSMD-3-0.5CSMD-3-0.5 empty htcc csmd ceramic package, 10.20 x 7.50 mmEmpty HTCC CSMD ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSMD ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 10.20 x 7.50 mm. The die-attach area is 5.40 x 4.05 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSMD-3-0.5
Type
Empty HTCC CSMD ceramic package
Body size
10.20 x 7.50 mm
Body thickness
3 mm
Nominal die-attach area
5.40 x 4.05 mm
Product family
Empty Ic Packages
Public SKU
CSMD-3-0.5
Display description
CSMD-3-0.5 empty htcc csmd ceramic package, 10.20 x 7.50 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSMD-3-1.0CSMD-3-1.0 empty htcc csmd ceramic package, 15.88 x 11.43 mmEmpty HTCC CSMD ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSMD ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 15.88 x 11.43 mm. The die-attach area is 8.40 x 8.20 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSMD-3-1.0
Type
Empty HTCC CSMD ceramic package
Body size
15.88 x 11.43 mm
Body thickness
3.2 mm
Nominal die-attach area
8.40 x 8.20 mm
Product family
Empty Ic Packages
Public SKU
CSMD-3-1.0
Display description
CSMD-3-1.0 empty htcc csmd ceramic package, 15.88 x 11.43 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSOP-08BCSOP-08B empty htcc csop ceramic package, 11.00 x 11.00 mmEmpty HTCC CSOP ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSOP ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 11.00 x 11.00 mm. The die-attach area is 3.00 x 2.74 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSOP-08B
Type
Empty HTCC CSOP ceramic package
Outline size
11.00 x 11.00 mm
Connection count
8
Nominal die-attach area
3.00 x 2.74 mm
Product family
Empty Ic Packages
Public SKU
CSOP-08B
Display description
CSOP-08B empty htcc csop ceramic package, 11.00 x 11.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSOP-08UCSOP-08U empty htcc csop ceramic package, 11.00 x 11.00 mmEmpty HTCC CSOP ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSOP ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 11.00 x 11.00 mm. The die-attach area is 3.00 x 2.74 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSOP-08U
Type
Empty HTCC CSOP ceramic package
Outline size
11.00 x 11.00 mm
Connection count
8
Nominal die-attach area
3.00 x 2.74 mm
Product family
Empty Ic Packages
Public SKU
CSOP-08U
Display description
CSOP-08U empty htcc csop ceramic package, 11.00 x 11.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSOP-10LCSOP-10L empty htcc csop ceramic package, 12.50 x 12.25 mmEmpty HTCC CSOP ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSOP ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 12.50 x 12.25 mm. The die-attach area is 5.75 x 4.25 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSOP-10L
Type
Empty HTCC CSOP ceramic package
Outline size
12.50 x 12.25 mm
Connection count
10
Nominal die-attach area
5.75 x 4.25 mm
Product family
Empty Ic Packages
Public SKU
CSOP-10L
Display description
CSOP-10L empty htcc csop ceramic package, 12.50 x 12.25 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSOP-14CSOP-14 empty htcc csop ceramic package, 16.80 x 15.50 mmEmpty HTCC CSOP ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSOP ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 16.80 x 15.50 mm. The die-attach area is 4.50 x 2.40 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSOP-14
Type
Empty HTCC CSOP ceramic package
Outline size
16.80 x 15.50 mm
Connection count
14
Nominal die-attach area
4.50 x 2.40 mm
Product family
Empty Ic Packages
Public SKU
CSOP-14
Display description
CSOP-14 empty htcc csop ceramic package, 16.80 x 15.50 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CSOP-24BCSOP-24B empty htcc csop ceramic package, 21.00 x 17.60 mmEmpty HTCC CSOP ceramic package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty HTCC CSOP ceramic package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 21.00 x 17.60 mm. The die-attach area is 6.90 x 4.30 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CSOP-24B
Type
Empty HTCC CSOP ceramic package
Outline size
21.00 x 17.60 mm
Connection count
24
Nominal die-attach area
6.90 x 4.30 mm
Product family
Empty Ic Packages
Public SKU
CSOP-24B
Display description
CSOP-24B empty htcc csop ceramic package, 21.00 x 17.60 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
BGA1313-256ballsBGA1313-256BALLSBGA1313-256balls empty bga cavity package, 13.00 x 13.00 mmEmpty BGA cavity package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty BGA cavity package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 13.00 x 13.00 mm. The die-attach area is 8.00 x 8.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Depth interpretation: The catalogue lists 3 mm. Confirm the component, measurement datum, matching lid and assembled clearance on the current drawing before checking die thickness or wire-loop height.
  • Lid distinction: ALN describes the matching 12.8 × 12.8 mm LCP lid as having a 3 mm internal cavity. This does not establish a 3 mm recess in the bare BGA substrate or the final wire clearance.
Manufacturer model
BGA1313-256balls
Type
Empty BGA cavity package
Body size
13.00 x 13.00 mm
Connection count
256
Pitch
0.7 mm
Catalogue cavity depth
3 mm; component and datum require drawing confirmation
Nominal die-attach area
8.00 x 8.00 mm
Product family
Empty Ic Packages
Public SKU
BGA1313-256BALLS
Display description
BGA1313-256balls empty bga cavity package, 13.00 x 13.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
Ball array
16 x 16 full array, 256 balls
Ball diameter
0.45 mm
View product and request a quote
Product sources
BGA2020-512ballsBGA2020-512BALLSBGA2020-512balls empty bga cavity package, 20.00 x 20.00 mmEmpty BGA cavity package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty BGA cavity package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 20.00 x 20.00 mm. The die-attach area is 16.00 x 16.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Depth interpretation: The catalogue lists 3 mm. Confirm the component, measurement datum, matching lid and assembled clearance on the current drawing before checking die thickness or wire-loop height.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
BGA2020-512balls
Type
Empty BGA cavity package
Body size
20.00 x 20.00 mm
Connection count
512
Pitch
0.7 mm
Catalogue cavity depth
3 mm; component and datum require drawing confirmation
Nominal die-attach area
16.00 x 16.00 mm
Product family
Empty Ic Packages
Public SKU
BGA2020-512BALLS
Display description
BGA2020-512balls empty bga cavity package, 20.00 x 20.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNC-144-20-5ALNC-144-20-5 empty ic cavity package, 20.00 x 20.00 mmEmpty IC cavity package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty IC cavity package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 20.00 x 20.00 mm. The die-attach area is 16.00 x 16.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Depth interpretation: The catalogue lists 3 mm. Confirm the component, measurement datum, matching lid and assembled clearance on the current drawing before checking die thickness or wire-loop height.
  • Terminal format: The catalogue lists 144 connections but does not establish the underside terminal format in a model-specific drawing. Confirm BGA or LGA construction, terminal map and ball supply before treating it as a replacement for another 144-I/O package.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
ALNC-144-20-5
Type
Empty IC cavity package
Body size
20.00 x 20.00 mm
Connection count
144
Pitch
0.5 mm
Catalogue cavity depth
3 mm; component and datum require drawing confirmation
Nominal die-attach area
16.00 x 16.00 mm
Product family
Empty Ic Packages
Public SKU
ALNC-144-20-5
Display description
ALNC-144-20-5 empty ic cavity package, 20.00 x 20.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
CQFP144-01CQFP144-01 empty ic cavity package, 19.00 x 19.00 mmEmpty IC cavity package for prototype assembly.
Selection and part-number notes
  • What is supplied: Empty IC cavity package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal overall outline is 19.00 x 19.00 mm. The die-attach area is 12.00 x 12.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
CQFP144-01
Type
Empty IC cavity package
Outline size
19.00 x 19.00 mm
Connection count
144
Pitch
0.5 mm
Cavity depth
1.5 mm
Nominal die-attach area
12.00 x 12.00 mm
Product family
Empty Ic Packages
Public SKU
CQFP144-01
Display description
CQFP144-01 empty ic cavity package, 19.00 x 19.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
Price note
No checkout price or stock is claimed; MST confirms configuration, MOQ, lead time and final USD quote after review.
Target buyers
Fab-adjacent buyers: design houses, semiconductor startups, equipment vendors and suppliers entering fab supply chains.
View product and request a quote
Product sources
ALNC-48-7-5CALNC-48-7-5C empty htcc ceramic qfn48 package, 7.00 x 7.00 mmEmpty HTCC ceramic QFN48 package for prototype assembly.
Selection and part-number notes
  • Reference unit prices by quoted lot: 10 pcs: USD 16.89/pc; 50 pcs: USD 14.64/pc. Quantities are quote bases, not confirmed stock. Final quantity, price and delivery are confirmed in your quotation.
  • Empty package body only; die, lid, socket and assembly are separate. International freight and import charges are extra. Request a quote for other quantities and the confirmed ship date.
  • What is supplied: Empty HTCC ceramic QFN48 package. Die, lid, bonding wire and assembly services are separate.
  • Dimension check: The nominal body is 7.00 x 7.00 mm. The die-attach area is 5.00 x 5.00 mm; check die thickness, wire-loop height and assembly clearance.
  • Ceramic versus plastic: This alumina HTCC package has a 5 x 5 mm die area and 0.5 mm cavity depth. Its AuSn sealing process differs from an adhesive-sealed LCP body. Hermetic performance requires a qualified lid and completed assembly test.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Reference unit price (10 pcs)
USD 16.89/pc
Reference unit price (50 pcs)
USD 14.64/pc
Manufacturer model
ALNC-48-7-5C
Type
Empty HTCC ceramic QFN48 package
Body size
7.00 x 7.00 mm
Connection count
48
Pitch
0.5 mm
Cavity depth
0.5 mm
Body thickness
0.8 mm
Nominal die-attach area
5.00 x 5.00 mm
Body material
Alumina (Al2O3), HTCC
Closure process
AuSn eutectic; lid and sealing quoted separately
Product family
Empty Ic Packages
Public SKU
ALNC-48-7-5C
Display description
ALNC-48-7-5C empty htcc ceramic qfn48 package, 7.00 x 7.00 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
View product and request a quote
Product sources

Looking for a replacement? Send the model number and request a quote.

Technical guides and sources

Need help confirming the specification?

Send the known manufacturer or part number, drawing or dimensions, quantity, destination and required date. Include the equipment and operating conditions when suitability needs to be checked.

Start with the information you have. We can help clarify missing details before quoting.

Ask MST about this requirement

Frequently asked questions

Which open-cavity package sizes does MST list?

Plastic QFN cavity packages from 3 x 3 mm to 12 x 12 mm, an HTCC ceramic QFN48 7 x 7 mm, BGA cavity packages of 13 x 13 mm (256 balls) and 20 x 20 mm (512 balls), a CQFP144 of 19 x 19 mm and HTCC ceramic CSOP and CSMD packages. Each part page shows the body size, terminal count, pitch and cavity data.

How are these empty IC packages sourced?

MST sources the listed packages and confirms configuration, price and lead time in the quotation.

How do I find a lid for an empty package?

Each package page has a Compatible parts block that lists lids from the IC package lids category whose outline is up to 0.5 mm smaller than the package body on each side. Request a quote.

How are empty IC packages priced?

They are quoted on request. Send the part number and quantity through the RFQ form on the part page; price, stock and lead time are confirmed in the quotation.