MST
RFQ cartCart

Typical applications, industries and selection tips

Typical applications

  • Closing open-cavity packages after die attach and wire bond
  • Low-temperature adhesive sealing of prototype and MPW packages
  • Solder-sealing ceramic packages with a plated seal ring (Kovar Au80Sn20 lid)

Industries

  • Design houses
  • Semiconductor startups
  • Equipment vendors
  • Suppliers entering fab supply chains

Selection tips

  • Black alumina B-stage lids run from 2.90 mm to 11.85 mm for nominal 3 mm to 12 mm package outlines; match the outline on the package page.
  • The 8006NS adhesive bead is 0.1 mm high and 0.3 mm or 0.4 mm wide; it must land on the package seal ring.
  • The drawing cure reference is 30 min at 175 C; check that die-attach and bond materials tolerate it.
  • B-stage storage reference is 6 months at -10 C; confirm batch dates in the quotation.
  • QFN77LIDKAU is a Kovar lid with Au80Sn20 solder for reflow sealing; the package needs a solderable seal ring.
MST engineering note, computed from the published specifications above. Request a quote.

Can't find it? We'll source it — and check it fits.

An MST engineer will review your requirement and reply to help with sourcing and compatibility.

Request sourcing & fit check

IC package lids

10 products

Showing 1–10 of 10

1 product · final price and lead time on quote
REFERENCE PRICE · QUOTESupplier series photo · representativePCLID1212 — Supplier series photo · representative

PCLID1212 b-stage adhesive ceramic flat lid, 11.85 x 11.85 mm

Reference unit prices by quoted lot: 50 pcs: USD 2.71/pc. Quantities are quote bases, not confirmed stock. Final quantit · PCLID1212 · 11.85 x 11.85 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.4 mm; nominal package outline 12 mm.

$2.71USD reference price · Nov 9, 2026 · final price on quote
Minimum order Confirmed with quoteSupply lead time Confirmed with quote

Products

Ask for a quote and we confirm the price before you order
PRICE ON QUOTESupplier series photo · representativePCLID0303 — Supplier series photo · representative

PCLID0303 b-stage adhesive ceramic flat lid, 2.90 x 2.90 mm

PCLID0303 · 2.90 x 2.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 3 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0404 — Supplier series photo · representative

PCLID0404 b-stage adhesive ceramic flat lid, 3.90 x 3.90 mm

PCLID0404 · 3.90 x 3.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 4 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0505 — Supplier series photo · representative

PCLID0505 b-stage adhesive ceramic flat lid, 4.90 x 4.90 mm

PCLID0505 · 4.90 x 4.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 5 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0606 — Supplier series photo · representative

PCLID0606 b-stage adhesive ceramic flat lid, 5.90 x 5.90 mm

PCLID0606 · 5.90 x 5.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 6 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0707 — Supplier series photo · representative

PCLID0707 b-stage adhesive ceramic flat lid, 6.90 x 6.90 mm

PCLID0707 · 6.90 x 6.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 7 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0808 — Supplier series photo · representative

PCLID0808 b-stage adhesive ceramic flat lid, 7.90 x 7.90 mm

PCLID0808 · 7.90 x 7.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.3 mm; nominal package outline 8 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID0909 — Supplier series photo · representative

PCLID0909 b-stage adhesive ceramic flat lid, 8.90 x 8.90 mm

PCLID0909 · 8.90 x 8.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.4 mm; nominal package outline 9 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativePCLID1010 — Supplier series photo · representative

PCLID1010 b-stage adhesive ceramic flat lid, 9.90 x 9.90 mm

PCLID1010 · 9.90 x 9.90 mm. · body thickness 0.38 mm; adhesive height 0.1 mm; adhesive width 0.4 mm; nominal package outline 10 mm. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote
PRICE ON QUOTESupplier series photo · representativeQFN77LIDKAU — Supplier series photo · representative

QFN77LIDKAU kovar flat lid with au80sn20 solder, 6.90 x 6.90 mm

QFN77LIDKAU · 6.90 x 6.90 mm. · body thickness 0.25 mm; total thickness incl. solder 0.3 mm; solder ring inner square 6.15 mm; material Kovar. · Price, supply minimum and lead time confirmed by quote.

Request a quote
Minimum order 1Supply lead time Confirmed with quote

Compare specifications

Review model numbers, published specifications and reference documents together. Open a product for its complete data and current purchasing terms.

Showing 10 of 10 products

Values are reproduced from the published product data. A listed application is a selection reference; check the exact configuration for your equipment.
Model / material gradePublished application or usePublished specificationsPurchase or quote
PCLID0303PCLID0303 b-stage adhesive ceramic flat lid, 2.90 x 2.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 2.90 x 2.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0303
Type
B-stage adhesive ceramic flat lid
Body size
2.90 x 2.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
3 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0303
Display description
PCLID0303 b-stage adhesive ceramic flat lid, 2.90 x 2.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0404PCLID0404 b-stage adhesive ceramic flat lid, 3.90 x 3.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 3.90 x 3.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0404
Type
B-stage adhesive ceramic flat lid
Body size
3.90 x 3.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
4 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0404
Display description
PCLID0404 b-stage adhesive ceramic flat lid, 3.90 x 3.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0505PCLID0505 b-stage adhesive ceramic flat lid, 4.90 x 4.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 4.90 x 4.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0505
Type
B-stage adhesive ceramic flat lid
Body size
4.90 x 4.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
5 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0505
Display description
PCLID0505 b-stage adhesive ceramic flat lid, 4.90 x 4.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0606PCLID0606 b-stage adhesive ceramic flat lid, 5.90 x 5.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 5.90 x 5.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0606
Type
B-stage adhesive ceramic flat lid
Body size
5.90 x 5.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
6 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0606
Display description
PCLID0606 b-stage adhesive ceramic flat lid, 5.90 x 5.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0707PCLID0707 b-stage adhesive ceramic flat lid, 6.90 x 6.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 6.90 x 6.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0707
Type
B-stage adhesive ceramic flat lid
Body size
6.90 x 6.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
7 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0707
Display description
PCLID0707 b-stage adhesive ceramic flat lid, 6.90 x 6.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0808PCLID0808 b-stage adhesive ceramic flat lid, 7.90 x 7.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 7.90 x 7.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0808
Type
B-stage adhesive ceramic flat lid
Body size
7.90 x 7.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.3 mm
Nominal package outline
8 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0808
Display description
PCLID0808 b-stage adhesive ceramic flat lid, 7.90 x 7.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID0909PCLID0909 b-stage adhesive ceramic flat lid, 8.90 x 8.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 8.90 x 8.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID0909
Type
B-stage adhesive ceramic flat lid
Body size
8.90 x 8.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.4 mm
Nominal package outline
9 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID0909
Display description
PCLID0909 b-stage adhesive ceramic flat lid, 8.90 x 8.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID1010PCLID1010 b-stage adhesive ceramic flat lid, 9.90 x 9.90 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 9.90 x 9.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
PCLID1010
Type
B-stage adhesive ceramic flat lid
Body size
9.90 x 9.90 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.4 mm
Nominal package outline
10 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID1010
Display description
PCLID1010 b-stage adhesive ceramic flat lid, 9.90 x 9.90 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
MOQ
1
View product and request a quote
Product sources
PCLID1212PCLID1212 b-stage adhesive ceramic flat lid, 11.85 x 11.85 mmB-stage adhesive ceramic flat lid for prototype assembly.
Selection and part-number notes
  • Reference unit prices by quoted lot: 50 pcs: USD 2.71/pc. Quantities are quote bases, not confirmed stock. Final quantity, price and delivery are confirmed in your quotation.
  • Lid only; package body, die and assembly are separate. International freight and import charges are extra. Request a quote for other quantities and the confirmed ship date.
  • Adhesive handling: supplier guidance specifies −10 °C storage and a nominal six-month shelf life. The actual batch date, remaining shelf life and shipping conditions must be confirmed before ordering.
  • What is supplied: B-stage adhesive ceramic flat lid. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 11.85 x 11.85 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Reference unit price (50 pcs)
USD 2.71/pc
Manufacturer model
PCLID1212
Type
B-stage adhesive ceramic flat lid
Body size
11.85 x 11.85 mm
Body thickness
0.38 mm
Adhesive height
0.1 mm
Adhesive width
0.4 mm
Nominal package outline
12 mm
Lid material
Black alumina (Al2O3) ceramic
Adhesive
B-stage, 8006NS
Drawing cure reference
30 min at 175 C; qualify for the chosen assembly
Storage reference
6 months at -10 C with B-stage; confirm actual batch dates
Product family
Ic Package Lids
Public SKU
PCLID1212
Display description
PCLID1212 b-stage adhesive ceramic flat lid, 11.85 x 11.85 mm
Commercial mode
Product RFQ / MST confirms requirements and final quotation before order acceptance
View product and request a quote
Product sources
QFN77LIDKAUQFN77LIDKAU kovar flat lid with au80sn20 solder, 6.90 x 6.90 mmKovar flat lid with Au80Sn20 solder for prototype assembly.
Selection and part-number notes
  • What is supplied: Kovar flat lid with Au80Sn20 solder. The package body, die and sealing service are separate.
  • Dimension check: The nominal body is 6.90 x 6.90 mm. Match the lid, sealing ring and package surface using the current manufacturer drawings.
  • Sealing scope: A lid alone does not establish a hermetic package or an assembly process. Confirm the substrate, lid surface, adhesive or solder, tooling and actual batch condition together.
  • Quantity and delivery: Send the exact model, required quantity, destination and target date. The RFQ form accepts requests from one piece; the supply minimum, available quantity, price and delivery date are confirmed in the quotation.
  • Drawing and compatibility: The dimension diagram is an MST schematic from the manufacturer numeric table, not a photograph, PCB footprint or manufacturing drawing. Ask for the current model drawing before ordering.
  • Source scope: The linked manufacturer page describes the product family. Model dimensions are from supplier documents reviewed by MST. Confirm the current model drawing, tolerances, bonding and lid process before assembly; a family page does not establish interchangeability.
Manufacturer model
QFN77LIDKAU
Type
Kovar flat lid with Au80Sn20 solder
Body size
6.90 x 6.90 mm
Body thickness
0.25 mm
Total thickness incl. solder
0.3 mm
Solder ring inner square
6.15 mm
Material
Kovar
Solder
Au80Sn20
Plating
Ni >= 3 um; Au >= 1.3 um
View product and request a quote
Product sources

Looking for a replacement? Send the model number and request a quote.

Technical guides and sources

Need help confirming the specification?

Send the known manufacturer or part number, drawing or dimensions, quantity, destination and required date. Include the equipment and operating conditions when suitability needs to be checked.

Start with the information you have. We can help clarify missing details before quoting.

Ask MST about this requirement

Frequently asked questions

What IC package lids are available?

Black alumina ceramic flat lids with B-stage adhesive (PCLID0303 to PCLID1212, 2.90 x 2.90 mm to 11.85 x 11.85 mm) and a Kovar flat lid with Au80Sn20 solder (QFN77LIDKAU, 6.90 x 6.90 mm).

Which lid fits a 7 x 7 mm QFN cavity package?

The 6.90 x 6.90 mm lids, PCLID0707 (ceramic, B-stage adhesive) and QFN77LIDKAU (Kovar, AuSn solder), have an outline that fits a 7 x 7 mm package body. Request a quote.

What is the difference between the ceramic and the Kovar lid?

The PCLID lids are ceramic and attach with a B-stage adhesive cured in the assembly process; QFN77LIDKAU is a Kovar lid with a pre-applied Au80Sn20 solder for a soldered seal.