MAZO 0.36 µH shielded power inductor, Idc 32 A typ. – Alternative to Bourns SRP1038A-R36M
- Inductance
- 0.36 µH
- Isat
- 54 A
- Idc
- 32 A
- DCR max
- 1.2 mΩ
- Brand
- MAZO
- Series
- VCMA-1040
- Size
- 11.5 × 10.3 × 4 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200RoHSHalogen free
- Stock
- Factory stock

Applications and industries
Industries: Automotive · AEC-Q200 qualified
Manufacturer-listed applications: Automotive applications (datasheet); ADAS, cockpit, powertrain, body and central domain controllers (MAZO application areas)
MST engineering note — typical circuits: 12 V battery buck to 5 V / 3.3 V / core rails, SoC and ADAS processor point-of-load, LED driver and SEPIC / buck-boost stages. Mid-to-high current rails.
Sources: VCMA-1040 datasheet · MAZO application areas
Selection tips
Selection tips
- Keep the peak current (DC load plus half the ripple) below Isat 54 A; Isat is 1.7× the 32 A heating-current rating.
- Copper loss at 32 A with DCR max 1.2 mΩ is about 1.23 W (I² × DCR); size copper and airflow for it.
- Use on rails at or below the 75 V rated voltage.
- Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
- AEC-Q200 is stated on the datasheet, so the part can enter an automotive qualification plan.
Specifications
Datasheet facts
- Recommended land pattern
- Two 4.1 × 4.1 mm pads, 5.4 mm apart, 13.6 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 10.7±0.10 × 12.0±0.10 × 4.5±0.10 mm
Datasheet VCMA-1040-XXX-M-1A, revision A2, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-1040-R36-M-1A matches the parts below in footprint class and nominal value. Request a quote.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-1040-R36-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Bourns | SRP1038A-R36MSRP1038A | 0.36 µH | 60 A · 20% | 31 A · 40 °C | 1.2 mΩ | 11 × 10 × 3.8 mm | Pad-compatible | 3.5 × 4.1 mm, gap 5.4 mmClose to MAZO (0.6 mm off) | Close candidate – verify peak current and 125 °C limit |
| Würth Elektronik | 744373680036WE-LHMI 1040 | 0.36 µH | 44.5 A · 10% | 36.2 A · 40 °C | 1.2 mΩ | 11 × 10 × 3.8 mm | Pad-compatible | 3.5 × 4.1 mm, gap 5.4 mmClose to MAZO (0.6 mm off) | With design margin |
| Vishay | IHLP4040DZERR36M01IHLP-4040DZ-01 | 0.36 µH | 60 A · 20% | 31.5 A · 40 °C | 1.4 mΩ | 10.8 × 10.16 × 4 mm | Same footprint class | 4.953 × 3.175 mm, gap 5.842 mmDiffers from MAZO (1.408 mm off) | Figures qualify; check the pads |
What each comparison means (3)
- Bourns SRP1038A-R36M: same 0.36 µH and 1.2 mΩ maximum DCR, both AEC-Q200. Saturation is rated on different bases (60 A at a 20 % drop vs 54 A typ / 50 A max at about a 30 % drop), so check your peak current against the MAZO L–I curve. The MAZO part is limited to 125 °C including self-heating (Bourns: 150 °C). A close candidate to verify on your board, not a drop-in.
- Würth Elektronik 744373680036 (WE-LHMI 1040): Same inductance, 0.36 µH vs MAZO 0.36 µH. Saturation current 44.5 A (10% drop) vs MAZO 54 A typ. (30% drop), rated on different bases so not directly comparable; heating current 36.2 A (40 °C rise) vs MAZO 32 A typ. (40 °C rise). DCR 1.2 mΩ max vs MAZO 1.2 mΩ max. Body 11 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 3.5 × 4.1 mm pads 5.4 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 0.6 mm). Verdict: replaceable with design margin (Idc about 12% lower at 40 °C rise, DCR equal). Request a quote.
- Vishay IHLP4040DZERR36M01 (IHLP-4040DZ-01): Same inductance, 0.36 µH vs MAZO 0.36 µH. Saturation current 60 A (20% drop) vs MAZO 54 A typ. (30% drop), rated on different bases so not directly comparable; heating current 31.5 A (40 °C rise) vs MAZO 32 A typ. (40 °C rise). DCR 1.4 mΩ max vs MAZO 1.2 mΩ max. Body 10.8 × 10.16 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 4.953 × 3.175 mm pads 5.842 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.408 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Engineering guides for this part
- Reading a power inductor datasheet for substitution: Isat 20 % vs 30 %, Irms temperature rise, test frequency and temperature rating
- MAZO VCMA-1040 power inductor series: all 15 values, saturation vs heating limits and how to pick one
- SRP1038A-R36M: Bourns 0.36 µH power inductor specs and MAZO candidates to verify
More parts in this category
- MAZO 2.2 µH 14 A shielded power inductor
- MAZO 3.3 µH 11.5 A shielded power inductor
- MAZO 4.7 µH 10.5 A shielded power inductor
- MAZO 6.8 µH 8 A shielded power inductor
- MAZO 8.2 µH 11 A shielded power inductor
- MAZO 0.22 µH 70 A shielded power inductor
- MAZO 0.47 µH 45 A shielded power inductor
- MAZO 0.56 µH 38 A shielded power inductor
- MAZO 0.68 µH 23 A shielded power inductor
- MAZO 10 µH 75 V 13.8 × 12.9 × 5.0 mm shielded power inductor
- MAZO 15 µH 10 A shielded power inductor
- MAZO 1 µH 26 A shielded power inductor
Same footprint, other values
Same 11.5 × 10.3 mm body, by inductance.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1040-R22-M-1A | 0.22 µH | 70 A | 37 A | 0.8 mΩ | 4 mm | $0.52 |
| LPCA-1040-R36-M | 0.36 µH | 50 A | 30 A | 1.2 mΩ | 4 mm | $0.53 |
| VCMA-1040-R47-M-1A | 0.47 µH | 45 A | 27 A | 1.7 mΩ | 4 mm | $0.52 |
| VCMA-1040-R56-M-1A | 0.56 µH | 38 A | 26 A | 1.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-R68-M-1A | 0.68 µH | 32 A | 23 A | 2.4 mΩ | 4 mm | $0.52 |
| VCMA-1040-1R0-M-1A | 1 µH | 29 A | 19 A | 3.1 mΩ | 4 mm | $0.52 |
| VCMA-1040-1R5-M-1A | 1.5 µH | 27 A | 17 A | 3.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-2R2-M-1A | 2.2 µH | 19 A | 14 A | 7 mΩ | 4 mm | $0.52 |
| VCMA-1040-3R3-M-1A | 3.3 µH | 17 A | 11.5 A | 11.8 mΩ | 4 mm | $0.55 |
| VCMA-1040-4R7-M-1A | 4.7 µH | 15 A | 10.5 A | 16 mΩ | 4 mm | $0.55 |
| VCMA-1040-6R8-M-1A | 6.8 µH | 12.5 A | 8 A | 25 mΩ | 4 mm | $0.55 |
| VCMA-1040-8R2-M-1A | 8.2 µH | 11 A | 7.8 A | 27 mΩ | 4 mm | $0.62 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-R36-M-1A | 0.36 µH | 26 A | 20 A | 3.7 mΩ | 7.3 × 6.8 × 3 mm | $0.30 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.52 | $2.60 |
| 50–149 | $0.37 | $18.50 |
| 150–499 | $0.302 | $45.30 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 499 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Can't find it? We'll source it — and check it fits.
Not sure it fits your tool/process? Ask an engineer to check
An MST engineer will review your requirement and reply to help with sourcing and compatibility.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.22–22 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 0.62–58 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 4.0 mm. More current: VCMA-1350; smaller: VCMA-0630.
Industry and product applications
VCMA-1040-R36-M-1A is a VCMA-1040 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-1040-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-1040-R36-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.
Frequently asked questions
What are the key specifications of VCMA-1040-R36-M-1A?
VCMA-1040-R36-M-1A: Brand: MAZO / Mazotech; Series: VCMA-1040; Inductance L0: 0.36 µH ±20% (1 MHz, 1.0 V); DCR typ.: 0.95 mΩ; DCR max.: 1.2 mΩ; Heating current Idc typ.: 32 A. Full values are in the specifications table above.
Which parts can VCMA-1040-R36-M-1A be evaluated as an alternative to?
VCMA-1040-R36-M-1A is listed as an alternative to Bourns SRP1038A-R36M, Würth Elektronik 744373680036, Vishay IHLP4040DZERR36M01 (same footprint class and nominal value). Request a quote with the RFQ form on this page.
What does VCMA-1040-R36-M-1A cost?
VCMA-1040-R36-M-1A is US$0.52 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.