MAZO 0.36 µH shielded power inductor, Idc 30 A typ. – Alternative to Bourns SRP1038A-R36M
- Inductance
- 0.36 µH
- Isat
- 50 A
- Idc
- 30 A
- DCR max
- 1.2 mΩ
- Brand
- MAZO
- Series
- LPCA-1040
- Size
- 11.5 × 10.3 × 4 mm
- Category
- MAZO power inductors
- Related applications
- AI server / GPU VRMAI-PC low profile
- Features
- Magnetic shieldRoHSHalogen free
- Stock
- Factory stock

Applications and industries
Industries: Server, AI & HPC power · Consumer & notebook · Networking & storage
Manufacturer-listed applications: Voltage regulator modules (VRM); SSD modules; Notebook regulators; Battery power systems; Graphics cards; Data networking and storage systems
MST engineering note — typical circuits: Multiphase CPU/GPU VRM phases and high-current point-of-load buck converters. Low DCR, high current, 11.5 × 10.3 × 4.0 mm.
The LPCA-1040 datasheet does not state AEC-Q200; for automotive designs choose a VCMA series.
Sources: LPCA-1040 datasheet · MAZO application areas
Selection tips
Selection tips
- Keep the peak current (DC load plus half the ripple) below Isat 50 A; Isat is 1.7× the 30 A heating-current rating.
- Copper loss at 30 A with DCR max 1.2 mΩ is about 1.08 W (I² × DCR); size copper and airflow for it.
- Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
- The datasheet does not state AEC-Q200; choose a qualified part for automotive designs.
Specifications
Datasheet facts
- Recommended land pattern
- Two 4.1 × 4.1 mm pads, 5.4 mm apart, 13.6 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 10.7±0.10 × 12.0±0.10 × 4.5±0.10 mm
Datasheet LPCA-1040-XXX-M, revision A1, 2025-03-03, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
LPCA-1040-R36-M matches the parts below in footprint class and nominal value. Request a quote.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | LPCA-1040-R36-M vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Bourns | SRP1038A-R36MSRP1038A | 0.36 µH | 60 A · 20% | 31 A · 40 °C | 1.2 mΩ | 11 × 10 × 3.8 mm | Pad-compatible | 3.5 × 4.1 mm, gap 5.4 mmClose to MAZO (0.6 mm off) | Close candidate – verify peak current and 125 °C limit |
| Würth Elektronik | 744373680036WE-LHMI 1040 | 0.36 µH | 44.5 A · 10% | 36.2 A · 40 °C | 1.2 mΩ | 11 × 10 × 3.8 mm | Pad-compatible | 3.5 × 4.1 mm, gap 5.4 mmClose to MAZO (0.6 mm off) | With design margin |
| Vishay | IHLP4040DZERR36M01IHLP-4040DZ-01 | 0.36 µH | 60 A · 20% | 31.5 A · 40 °C | 1.4 mΩ | 10.8 × 10.16 × 4 mm | Same footprint class | 4.953 × 3.175 mm, gap 5.842 mmDiffers from MAZO (1.408 mm off) | With margin; check the pads |
What each comparison means (3)
- Bourns SRP1038A-R36M: same 0.36 µH, the same 1.05 / 1.2 mΩ DCR and the same pad span. Saturation is rated on different bases (60 A at a 20 % drop vs 50 A typ at about a 30 % drop; about 40 A at 20 % on the MAZO curve), so check your peak current. The MAZO part is limited to 125 °C (Bourns: 150 °C) and states no AEC-Q200. A close candidate to verify, not a drop-in.
- Würth Elektronik 744373680036 (WE-LHMI 1040): Same inductance, 0.36 µH vs MAZO 0.36 µH. Saturation current 44.5 A (10% drop) vs MAZO 50 A typ. (30% drop), rated on different bases so not directly comparable; heating current 36.2 A (40 °C rise) vs MAZO 30 A typ. (40 °C rise). DCR 1.2 mΩ max vs MAZO 1.2 mΩ max. Body 11 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 3.5 × 4.1 mm pads 5.4 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 0.6 mm). Verdict: replaceable with design margin (Idc about 17% lower at 40 °C rise, DCR equal). Request a quote.
- Vishay IHLP4040DZERR36M01 (IHLP-4040DZ-01): Same inductance, 0.36 µH vs MAZO 0.36 µH. Saturation current 60 A (20% drop) vs MAZO 50 A typ. (30% drop), rated on different bases so not directly comparable; heating current 31.5 A (40 °C rise) vs MAZO 30 A typ. (40 °C rise). DCR 1.4 mΩ max vs MAZO 1.2 mΩ max. Body 10.8 × 10.16 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 4.953 × 3.175 mm pads 5.842 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.408 mm). Verdict: replaceable with design margin, pads need checking (Idc about 5% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Engineering guides for this part
More parts in this category
- MAZO ACMA / ACMB / ACMC Automotive Power Inductor series selection guide
- MAZO ACMT Automotive Power Inductor series selection guide
- MAZO ACMU Automotive Molded Power Inductor series selection guide
- MAZO ACSC 10 mm automotive double-coil power inductor series selection guide
- MAZO coupling choke for AI platform series selection guide
- MAZO low-profile inductor for Intel / Qualcomm AI-PC platforms series selection guide
- MAZO CAMC Automotive Power Inductor 3.3-22uH series selection guide
- MAZO CATB Compact Automotive Power Inductor series selection guide
- MAZO 0.15 uH 5.7 x 5.4 x 3.0 mm CPU platform inductor series selection guide
- MAZO 0.15 uH 33A CPU platform inductor series selection guide
- MAZO CCWC 48V/12V AI Power-Train Inductor 2.2uH 42A series selection guide
- MAZO CFPB 0.15 uH 38 A hot press CPU platform inductor series selection guide
Same footprint, other values
Same 11.5 × 10.3 mm body, by inductance.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1040-R22-M-1A | 0.22 µH | 70 A | 37 A | 0.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-R36-M-1A | 0.36 µH | 54 A | 32 A | 1.2 mΩ | 4 mm | $0.52 |
| VCMA-1040-R47-M-1A | 0.47 µH | 45 A | 27 A | 1.7 mΩ | 4 mm | $0.52 |
| VCMA-1040-R56-M-1A | 0.56 µH | 38 A | 26 A | 1.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-R68-M-1A | 0.68 µH | 32 A | 23 A | 2.4 mΩ | 4 mm | $0.52 |
| VCMA-1040-1R0-M-1A | 1 µH | 29 A | 19 A | 3.1 mΩ | 4 mm | $0.52 |
| VCMA-1040-1R5-M-1A | 1.5 µH | 27 A | 17 A | 3.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-2R2-M-1A | 2.2 µH | 19 A | 14 A | 7 mΩ | 4 mm | $0.52 |
| VCMA-1040-3R3-M-1A | 3.3 µH | 17 A | 11.5 A | 11.8 mΩ | 4 mm | $0.55 |
| VCMA-1040-4R7-M-1A | 4.7 µH | 15 A | 10.5 A | 16 mΩ | 4 mm | $0.55 |
| VCMA-1040-6R8-M-1A | 6.8 µH | 12.5 A | 8 A | 25 mΩ | 4 mm | $0.55 |
| VCMA-1040-8R2-M-1A | 8.2 µH | 11 A | 7.8 A | 27 mΩ | 4 mm | $0.62 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-R36-M-1A | 0.36 µH | 26 A | 20 A | 3.7 mΩ | 7.3 × 6.8 × 3 mm | $0.30 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.53 | $2.65 |
| 50–149 | $0.39 | $19.50 |
| 150–499 | $0.324 | $48.60 |
| 500–2999 | $0.226 | $113.00 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Can't find it? We'll source it — and check it fits.
Not sure it fits your tool/process? Ask an engineer to check
An MST engineer will review your requirement and reply to help with sourcing and compatibility.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.15–100 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 0.5–315 mΩ across the series; use the maximum for loss budgets.
Height
Max 4.0 mm. Not AEC-Q200: for automotive designs use VCMA-1040, same size.
Industry and product applications
LPCA-1040-R36-M is a LPCA-1040 series part for evaluation in computing, data storage and networking.
Manufacturer-listed series applications
Voltage regulator modules (VRM), SSD modules, notebook regulators, battery power systems, graphics cards, and data networking and storage systems.
MAZO datasheet: LPCA-1040-XXX-M, revision A1, 2025-03-03 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select LPCA-1040-R36-M against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.
Frequently asked questions
What are the key specifications of LPCA-1040-R36-M?
LPCA-1040-R36-M: Inductance L0: 0.36 µH ±20% (1 MHz, 1.0 V); DCR typ.: 1.05 mΩ; DCR max.: 1.2 mΩ; Heating current Idc typ.: 30 A; Saturation current Isat typ.: 50 A; Package: 11.5 × 10.3 × 4.0 mm max. Full values are in the specifications table above.
Which parts can LPCA-1040-R36-M be evaluated as an alternative to?
LPCA-1040-R36-M is listed as an alternative to Bourns SRP1038A-R36M, Würth Elektronik 744373680036, Vishay IHLP4040DZERR36M01 (same footprint class and nominal value). Request a quote with the RFQ form on this page.
What does LPCA-1040-R36-M cost?
LPCA-1040-R36-M is US$0.53 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.