AS568-210 O-Ring, FFKM (perfluoroelastomer) – 18.64 × 3.53 mm
- Category
- AS568 Standard O-Rings

Applications and selection tips
Typical applications
- Static seals in semiconductor process chambers exposed to plasma and aggressive chemistry
- Seals for high-temperature or broad-chemical service where FKM is not resistant enough
- Vacuum and gas-line seals on process tools
Industries
- Semiconductor equipment and fabs
- Chemical processing
- Laboratory and analytical equipment
Selection tips
- AS568-210 is a standard size, so the same dash number matches existing gland drawings.
- ID 0.734 ± 0.010 in (18.64 ± 0.25 mm), CS 0.139 ± 0.004 in (3.53 ± 0.10 mm): design the gland to the cross-section using the Parker O-Ring Handbook (ORD 5700) gland tables.
- Reference OD 1.012 in (25.70 mm) (ID + 2 × CS) for bore and housing checks.
- Parker ORD 5700 guidance: keep installed stretch on the ID low (about 5% or less) for static seals.
- FFKM compound and hardness are confirmed in the quotation; state your plasma chemistry, gases and peak temperature in the RFQ.
Specifications
Engineering guides for this part
More parts in this category
- AS568-128 O-Ring, FFKM (perfluoroelastomer) – 37.77 × 2.62 mm
- AS568-128 O-Ring, FKM 75A – 37.77 × 2.62 mm
- AS568-133 O-Ring, FFKM (perfluoroelastomer) – 45.69 × 2.62 mm
- AS568-133 O-Ring, FKM 75A – 45.69 × 2.62 mm
- AS568-138 O-Ring, FFKM (perfluoroelastomer) – 53.64 × 2.62 mm
- AS568-138 O-Ring, FKM 75A – 53.64 × 2.62 mm
- AS568-210 O-Ring, FKM 75A – 18.64 × 3.53 mm
- AS568-214 O-Ring, FFKM (perfluoroelastomer) – 24.99 × 3.53 mm
- AS568-214 O-Ring, FKM 75A – 24.99 × 3.53 mm
- AS568-218 O-Ring, FFKM (perfluoroelastomer) – 31.34 × 3.53 mm
- AS568-218 O-Ring, FKM 75A – 31.34 × 3.53 mm
- AS568-222 O-Ring, FFKM (perfluoroelastomer) – 37.69 × 3.53 mm
Price and lead time
- Minimum order
- Confirmed with quote
- Order multiple
- Confirmed with quote
- Availability
- Quoted on request
- Supply lead time
- Confirmed with quote
Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.
Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.
Compatible / Alternatives
Other AS568 listings near AS568-210 FFKM. Not an equivalence; check chemistry and temperature.
Same dash size, other materials
Selection and use
How to select
For a quotation, state
dash number or ID × CS, groove drawing, process media and temperature, vacuum level and bake-out, quantity and cleanroom packaging.
For vacuum chambers, specify the pressure range and bake-out temperature; outgassing data is requested for the exact compound and is not assumed here.
For an alternative seal, record the original part and candidate separately. Confirm the exact compound, hardness, current technical data sheet and required inspection or lot documents; a matching AS568 size alone does not establish replacement suitability.
Typical applications
Frequently asked questions
What are the key specifications of AS568-210-FFKM?
AS568-210-FFKM: Standard: SAE AS568; Dash number: -210 (AS568-210, 2-210); Inside diameter (ID): 0.734 ± 0.010 in (18.64 ± 0.25 mm); Cross-section (CS): 0.139 ± 0.004 in (3.53 ± 0.10 mm); Outside diameter (reference, ID + 2 × CS): 1.012 in (25.70 mm); Material: FFKM (perfluoroelastomer); compound and hardness confirmed in the quotation. Full values are in the specifications table above.
How do I get a price for AS568-210-FFKM?
Price, availability and lead time for AS568-210-FFKM are confirmed by quotation. Send the quantity with the RFQ form on this page.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.