Applications and selection tips
Typical applications
- General vacuum, gas and fluid static seals
- Seals exposed to oils, fuels and many chemicals
- Lower-cost alternative where FFKM chemistry resistance is not required
Industries
- Industrial equipment
- Vacuum systems
- Fluid handling
Selection tips
- AS568-214 is a standard size, so the same dash number matches existing gland drawings.
- ID 0.984 ± 0.010 in (24.99 ± 0.25 mm), CS 0.139 ± 0.004 in (3.53 ± 0.10 mm): design the gland to the cross-section using the Parker O-Ring Handbook (ORD 5700) gland tables.
- Reference OD 1.262 in (32.05 mm) (ID + 2 × CS) for bore and housing checks.
- Parker ORD 5700 guidance: keep installed stretch on the ID low (about 5% or less) for static seals.
- Compound and hardness are confirmed in the quotation; state the media and temperature range in the RFQ.
Specifications
Engineering guides for this part
- AS568 O-ring sizes and FKM vs FFKM selection
- O-ring failure modes in semiconductor tools: read the failed seal, then choose the elastomer by chemistry and temperature
- AS568 O-ring sizes in 5 minutes: dash-number series, squeeze worked example and FKM vs FFKM choice
- Selecting FFKM AS568 O-rings for semiconductor tools: FFKM vs FKM vs EPDM, grade by process and RFQ checklist
More parts in this category
- AS568-133 O-Ring, FKM 75A – 45.69 × 2.62 mm
- AS568-138 O-Ring, FFKM (perfluoroelastomer) – 53.64 × 2.62 mm
- AS568-138 O-Ring, FKM 75A – 53.64 × 2.62 mm
- AS568-210 O-Ring, FFKM (perfluoroelastomer) – 18.64 × 3.53 mm
- AS568-210 O-Ring, FKM 75A – 18.64 × 3.53 mm
- AS568-214 O-Ring, FFKM (perfluoroelastomer) – 24.99 × 3.53 mm
- AS568-218 O-Ring, FFKM (perfluoroelastomer) – 31.34 × 3.53 mm
- AS568-218 O-Ring, FKM 75A – 31.34 × 3.53 mm
- AS568-222 O-Ring, FFKM (perfluoroelastomer) – 37.69 × 3.53 mm
- AS568-222 O-Ring, FKM 75A – 37.69 × 3.53 mm
- AS568-226 O-Ring, FFKM (perfluoroelastomer) – 50.39 × 3.53 mm
- AS568-226 O-Ring, FKM 75A – 50.39 × 3.53 mm
Price and lead time
- Minimum order
- Confirmed with quote
- Order multiple
- Confirmed with quote
- Availability
- Quoted on request
- Supply lead time
- Confirmed with quote
Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.
Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.
Compatible / Alternatives
Other AS568 listings near AS568-214 FKM75. Not an equivalence; check chemistry and temperature.
Same dash size, other materials
Adjacent dash sizes, same material
Selection and use
How to select
For a quotation, state
dash number or ID × CS, groove drawing, process media and temperature, vacuum level and bake-out, quantity and cleanroom packaging.
For vacuum chambers, specify the pressure range and bake-out temperature; outgassing data is requested for the exact compound and is not assumed here.
Typical applications
Frequently asked questions
What are the key specifications of AS568-214?
AS568-214: Standard: SAE AS568; Dash number: -214 (AS568-214, 2-214); Inside diameter (ID): 0.984 ± 0.010 in (24.99 ± 0.25 mm); Cross-section (CS): 0.139 ± 0.004 in (3.53 ± 0.10 mm); Outside diameter (reference, ID + 2 × CS): 1.262 in (32.05 mm); Material: FKM (fluoroelastomer), 75 Shore A. Full values are in the specifications table above.
How do I get a price for AS568-214?
Price, availability and lead time for AS568-214 are confirmed by quotation. Send the quantity with the RFQ form on this page.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.