MST
RFQ cartCart
VCMA-1365-3R3-M-1A

MAZO 3.3 µH shielded power inductor, Idc 22 A typ. – Alternative to Cyntec VCMT136E-3R3MN54M

Inductance
3.3 µH
Isat
25 A
Idc
22 A
DCR max
4.5 mΩ
Brand
MAZO
Series
VCMA-1365
Size
13.8 × 12.9 × 6.5 mm
Related applications
Automotive / OBC
Features
AEC-Q200Magnetic shieldRoHSHalogen free
Stock
Factory stock

Applications and industries

Industries: Automotive · AEC-Q200 qualified

Manufacturer-listed applications: Automotive applications (datasheet); ADAS, cockpit, powertrain, body and central domain controllers (MAZO application areas)

MST engineering note — typical circuits: 12 V battery buck to 5 V / 3.3 V / core rails, SoC and ADAS processor point-of-load, LED driver and SEPIC / buck-boost stages. Highest inductance and current in the VCMA range.

Sources: VCMA-1365 datasheet · MAZO application areas

Selection tips

Selection tips

  • Keep the peak current (DC load plus half the ripple) below Isat 25 A; Isat is 1.1× the 22 A heating-current rating.
  • Copper loss at 22 A with DCR max 4.5 mΩ is about 2.18 W (I² × DCR); size copper and airflow for it.
  • Use on rails at or below the 75 V rated voltage.
  • Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
  • AEC-Q200 is stated on the datasheet, so the part can enter an automotive qualification plan.
MST engineering note, computed from the published specifications above. Request a quote.

Specifications

BrandMAZO / Mazotech
SeriesVCMA-1365
Inductance L03.3 µH ±20% (1 MHz, 1.0 V)
DCR typ.3.7 mΩ
DCR max.4.5 mΩ
Heating current Idc typ.22 A
Heating current Idc max.20 A
Saturation current Isat typ.25 A
Saturation current Isat max.23 A
Rated voltage max.75 V
Package13.8 × 12.9 × 6.5 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging500 pieces/reel
ApplicationsAutomotive applications

Datasheet facts

85.53.2514.5
Recommended land pattern (mm)
Recommended land pattern
Two 5.5 × 3.25 mm pads, 8 mm apart, 14.5 mm overall
Inductance test condition
1 MHz, 1.0 V, 25 °C
Current definitions
Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
Soldering
Reflow per J-STD-020
Operating temperature (ambient + self-heating)
-55 ~ +125 °C
Storage temperature
-55 ~ +125 °C
Packaging
500 pieces per reel; tape pocket 13.4±0.10 × 14.1±0.10 × 6.9±0.15 mm

Datasheet VCMA-1365-XXX-M-1A, revision A3, 2025-11-26, page 4

Characteristic curves

Inductance vs DC biasCSV
01234010203040Isat 25 ADC current (A)Inductance (µH)
Temperature rise vs currentCSV
020406080010203040Idc 22 ADC current (A)Temperature rise (°C)

Typical curves from the MAZO datasheet, for reference only.

Soldering and packaging

Alternative to these parts

VCMA-1365-3R3-M-1A matches the parts below in footprint class and nominal value. Request a quote.

BrandPart numberLIsatIrmsDCR maxSizeFootprintRecommended padsVCMA-1365-3R3-M-1A vs. this part
CyntecVCMT136E-3R3MN54MVCMT136E MN54M3.3 µH17 A · 20%18.3 A · 40 °C6 mΩ13.45 × 12.6 × 6.3 mmPad-compatible4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off)Drop-in candidate
BournsSRP1265A-3R3MSRP1265A3.3 µH30 A · 20%18 A · 40 °C6.8 mΩ13.5 × 12.5 × 6.2 mmPad-compatible5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off)With design margin
CyntecVCMI136E-3R3MN54MVCMI136E MN54M3.3 µH30 A · 20%18.6 A · 40 °C5.6 mΩ13.45 × 12.6 × 6.3 mmPad-compatible4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off)With design margin
BournsSRP1265CC-3R3MSRP1265CC3.3 µH35 A · 30%22 A · 40 °C6.8 mΩ13.5 × 12.5 × 6.2 mmPad-compatible5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off)Weaker figures
CyntecCMLS136E-3R3MSCMLS136E3.3 µH42 A · 30%22 A · 40 °C4.4 mΩ13.45 × 12.6 × 6.3 mmPad-compatible5 × 3.3 mm, gap 8 mmClose to MAZO (0.5 mm off)Weaker figures
Würth Elektronik744373965033WE-LHMI 13653.3 µH41.5 A · 30%16.2 A · 40 °C6.8 mΩ13.5 × 12.5 × 6.2 mmPad-compatible5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off)Weaker figures
CyntecVCMV136E-3R3MN24MVCMV136E MN24M3.3 µH35 A · 20%22.9 A · 40 °C6.6 mΩ13.45 × 12.6 × 6.3 mmSame footprint class5.7 × 4.335 mm, gap 7.2 mmDiffers from MAZO (1.37 mm off)Weaker figures
TDKSPM12565VC-3R3M-DSPM12565VC-D3.3 µH35.4 A · 30%17 A · 40 °C5.64 mΩ13 × 12.5 × 6.5 mmSame footprint class5 × 3.25 mm, gap 8.2 mmClose to MAZO (0.5 mm off)Weaker figures
TDKSPM12565VT-3R3M-DSPM12565VT-D3.3 µH34.6 A · 30%16.8 A · 40 °C5.39 mΩ13 × 12.5 × 6.5 mmSame footprint class5 × 3.25 mm, gap 8.2 mmClose to MAZO (0.5 mm off)Weaker figures
VishayIHLP5050FDEK3R3M01IHLP-5050FD-013.3 µH35 A · 20%18 A · 40 °C6.8 mΩ13.2 × 12.9 × 6.4 mmSame footprint class4.95 × 2.945 mm, gap 7.87 mmDiffers from MAZO (0.74 mm off)Weaker figures
VishayIHLP5050FDER3R3MA1IHLP-5050FD-A13.3 µH35 A · 20%18 A · 40 °C6.8 mΩ13.2 × 12.9 × 6.4 mmSame footprint class4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off)Weaker figures
What each comparison means (11)
  1. Cyntec VCMT136E-3R3MN54M (VCMT136E MN54M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 17 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18.3 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  2. Bourns SRP1265A-3R3M: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 30 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  3. Cyntec VCMI136E-3R3MN54M (VCMI136E MN54M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 30 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18.6 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: replaceable with design margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  4. Bourns SRP1265CC-3R3M: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 22 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 29% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
  5. Cyntec CMLS136E-3R3MS: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 42 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 22 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 4.4 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 5 × 3.3 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 40% lower, Idc not lower at 40 °C rise, DCR slightly higher). Request a quote.
  6. Würth Elektronik 744373965033 (WE-LHMI 1365): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 41.5 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 16.2 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 40% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
  7. Cyntec VCMV136E-3R3MN24M (VCMV136E MN24M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 22.9 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 5.7 × 4.335 mm pads 7.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 1.37 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc about 4% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  8. TDK SPM12565VC-3R3M-D (SPM12565VC-D): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35.4 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 17 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.64 mΩ max vs MAZO 4.5 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 29% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  9. TDK SPM12565VT-3R3M-D (SPM12565VT-D): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 34.6 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 16.8 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.39 mΩ max vs MAZO 4.5 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 28% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  10. Vishay IHLP5050FDEK3R3M01 (IHLP-5050FD-01): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern differs from MAZO's: two 4.95 × 2.945 mm pads 7.87 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 0.74 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
  11. Vishay IHLP5050FDER3R3MA1 (IHLP-5050FD-A1): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
How the figures are compared

Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.

Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.

More parts in this category

Same footprint, other values

Same 13.8 × 12.9 mm body, by inductance.

Part numberLIsatIdcDCR maxHeightUnit price
VCMA-1350-R82-M-1A0.82 µH45 A31 A1.6 mΩ5 mm$0.75
VCMA-1350-1R0-M-1A1 µH39.5 A26 A2 mΩ5 mm$0.75
VCMA-1365-1R0-M-1A1 µH43 A38 A1.9 mΩ6.5 mm$0.79
VCMA-1350-1R5-M-1A1.5 µH39 A23 A3.1 mΩ5 mm$0.75
VCMA-1365-1R5-M-1A1.5 µH40 A35 A2.5 mΩ6.5 mm$0.79
VCMA-1350-2R2-M-1A2.2 µH28 A21 A4.6 mΩ5 mm$0.72
VCMA-1365-2R2-M-1A2.2 µH35 A30 A3.2 mΩ6.5 mm$0.79
VCMA-1350-3R3-M-1A3.3 µH24 A16 A6.9 mΩ5 mm$0.75
VCMA-1350-4R7-M-1A4.7 µH20.5 A14 A9.2 mΩ5 mm$0.75
VCMA-1365-4R7-M-1A4.7 µH24 A20 A6.9 mΩ6.5 mm$0.79
VCMA-1350-5R6-M-1A5.6 µH20 A12 A12 mΩ5 mm$0.75
VCMA-1365-5R6-M-1A5.6 µH22 A18 A8.2 mΩ6.5 mm$0.90

Same value, other sizes

Smallest first. A larger body usually carries more current; the pads differ.

Part numberLIsatIdcDCR maxBodyUnit price
VCMA-0420-3R3-M-1A3.3 µH4.5 A3.3 A82 mΩ4.75 × 4.45 × 2 mm$0.23
VCMA-0530-3R3-M-1A3.3 µH7.5 A4.8 A37 mΩ5.7 × 5.4 × 3 mm$0.27
VCMA-1040-3R3-M-1A3.3 µH17 A11.5 A11.8 mΩ11.5 × 10.3 × 4 mm$0.55

Buy

Unit price · USD / piece$0.79For 5 pieces
Quantity pricingSelect a tier to set the quantity.
QuantityUnit priceExtended
5–49$0.79$3.95
50–149$0.57$28.50
150–499$0.461$69.15
500–2999$0.356$178.00
Merchandise subtotal$3.95Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Minimum order
5 pieces
Order multiple
1 piece
Availability
Factory stock
Dispatch preparation
2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.

Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.

Minimum order: 5; order in multiples of 1.
PackagingFor the selected quantity
Standard full-reel quantity
500 pieces
Packed as
Cut tape · 5 pieces
Cut-tape fee
None
Online order limit
2999 pieces

Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.

Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.

Can't find it? We'll source it — and check it fits.

Not sure it fits your tool/process? Ask an engineer to check

An MST engineer will review your requirement and reply to help with sourcing and compatibility.

Request sourcing & fit check

Selection and use

How to select

Choosing inductance

L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 1.0–33 µH in one body, so changing the value needs no new layout.

Saturation current Isat

the current at which inductance falls about 30%; keep the peak current below it.

Heating current Idc

the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.

DC resistance

sets the conduction loss. Typical 1.65–39 mΩ across the series; use the maximum for loss budgets.

Rated voltage

75 V maximum; check it against the input voltage.

Height

Max 6.5 mm. Height-limited: VCMA-1350 (5.0 mm) on the same land pattern.

Industry and product applications

VCMA-1365-3R3-M-1A is a VCMA-1365 series part for evaluation in automotive electronics.

Manufacturer-listed series applications

Automotive applications.

MAZO datasheet: VCMA-1365-XXX-M-1A, revision A3, 2025-11-26 — applications on page 1

Circuit applications to evaluate

  • Pre-regulators and boost stages
  • 48 V to 12 V converters
  • BMS and on-board charger auxiliary supplies

These are series applications and engineering evaluation examples. Select VCMA-1365-3R3-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.

Frequently asked questions

What are the key specifications of VCMA-1365-3R3-M-1A?

VCMA-1365-3R3-M-1A: Brand: MAZO / Mazotech; Series: VCMA-1365; Inductance L0: 3.3 µH ±20% (1 MHz, 1.0 V); DCR typ.: 3.7 mΩ; DCR max.: 4.5 mΩ; Heating current Idc typ.: 22 A. Full values are in the specifications table above.

Which parts can VCMA-1365-3R3-M-1A be evaluated as an alternative to?

VCMA-1365-3R3-M-1A is listed as an alternative to Cyntec VCMT136E-3R3MN54M, Bourns SRP1265A-3R3M, Cyntec VCMI136E-3R3MN54M, Bourns SRP1265CC-3R3M, Cyntec CMLS136E-3R3MS, Würth Elektronik 744373965033 (same footprint class and nominal value). Request a quote with the RFQ form on this page.

What does VCMA-1365-3R3-M-1A cost?

VCMA-1365-3R3-M-1A is US$0.79 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.

Can MST source a part number that is not listed?

Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.