| Chemraz 513SC-SEAL-RFQGreene Tweed Chemraz 513 · Seals & O-Rings | FFKM sealing compound for selected semiconductor dry-process applications.Selection and part-number notes- Does a Chemraz grade fix size?: Chemraz 513 identifies an FFKM material grade, not the required O-ring dimensions. Start with the existing seal or groove drawing, then confirm dimensions, process gases, temperature and sealing load.
- Only know the equipment?: Start with the equipment brand and full model, what the consumable does, or the old part number. If details are missing, describe the task in your inquiry; MST can help identify which specifications need confirmation.
- Looking for a similar part?: Tell us what must stay the same and what may change. A candidate can be compared by dimensions, interface, material and process conditions; a similar name or appearance alone does not establish interchangeability.
- For a quotation, specify: O-ring dimensions, groove, process gases, temperature and sealing load.
| 210 °CReference temperature limit | 80 Shore A (typical)Typical hardness | See product details | See product details | View product and request a quoteProduct sources |
|---|
| 5130UPMORISZ-5130UP-RFQMORISEAL Morisz 5130UP FFKM O-rings — semiconductor material series | Dynamic sealing contact points in plasma environmentsSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| (-5)–250 °CTemperature range | 80±5Hardness (HA) | 22 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| MPF506UPMORISZ-MPF506UP-RFQMORISEAL Morisz MPF506UP FFKM O-rings — semiconductor material series | Specialty gas pipeline sealsSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| (-5)–250 °CTemperature range | 80±5Hardness (HA) | 21 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| 6002UPMORISZ-6002UP-RFQMORISEAL Morisz 6002UP FFKM O-rings — semiconductor material series | High-temperature seals exposed to water vapor, oxygen or ozoneSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| 0–300 °CTemperature range | 80±5Hardness (HA) | 19 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| 5802SPMORISZ-5802SP-RFQMORISEAL Morisz 5802SP FFKM O-rings — semiconductor material series | High-temperature seals exposed to water vapor, oxygen or ozoneSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| 0–300 °CTemperature range | 75±5Hardness (HA) | 16 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| 6880SPMORISZ-6880SP-RFQMORISEAL Morisz 6880SP FFKM O-rings — semiconductor material series | High-temperature plasma exposure while the seal is under mechanical stressSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| 0–315 °CTemperature range | 80±5Hardness (HA) | 17 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| 6880SZMORISZ-6880SZ-RFQMORISEAL Morisz 6880SZ FFKM O-rings — semiconductor material series | High-temperature plasma exposure while the seal is under mechanical stressSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| 0–315 °CTemperature range | 80±5Hardness (HA) | 9 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| N65MORISZ-N65-RFQMORISEAL Morisz N65 FFKM O-rings — semiconductor material series | Plasma sealing at elevated temperatures; confirm the duration at the upper limitSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| 0–330 °CTemperature range | 75±5Hardness (HA) | 11 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| ST50iMORISZ-ST50I-RFQMORISEAL Morisz ST50i FFKM O-rings — semiconductor material series | Low-temperature sealing; manufacturer also describes plasma and corrosive-media useSelection and part-number notes- Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.
- Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.
- Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.
- Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.
- What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.
- Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.
| (-45)–200 °CTemperature range | 65±5Hardness (HA) | 24 %Compression set | 200 °C / 70 hCompression-set test conditions | View product and request a quoteProduct sources |
|---|
| MPF506WMORISZ-MPF506W-RFQMORISEAL Morisz MPF506W FFKM O-rings — material datasheet and size enquiry | White FFKM material for semiconductor seal evaluation. Download the two-page supplier datasheet and enquire by grade, dimensions and process.Selection and part-number notes- MPF506W and MPF506UP are different grade identifiers. Use the exact grade on the quotation and packaging label.
- Enquire by AS568 code or inside diameter × cross-section, tolerance and groove drawing. The four listed sizes are nominal options for evaluation.
- For an alternative, include the original part number, media, temperature, sealing load and static/dynamic duty. Confirm acceptance tests before use.
- The supplier datasheet labels hardness as Shore A but lists ASTM D1415; clarify the test method before treating hardness values as directly comparable.
| −10 to 250 °CReported temperature range | 75; labelled Shore A; ASTM D1415 is listed. Method and specimen require clarification.Reported hardness / method | See product details | 18%; 200 °C / 70 h; ASTM D395; deflection not stated.Compression set / conditions | View product and request a quoteProduct sources |
|---|