MST
RFQ cartCart

Specifications

BrandMORISEAL / Morisz
Manufacturer part numberMPF506UP
MaterialFFKM
ColorWhite
Temperature range(-5)–250 °C
Hardness (HA)80±5
Compression set21 %
Compression-set test conditions200 °C / 70 h
ApplicationSpecialty gas pipeline seals
Finished O-ring dimensionsSpecify inner diameter × cross-section, units, tolerances and drawing or standard size code. This listing is a material series.
Size-series referencesP, AS568, G, AN6227, GS, AN6230, V, S, VS, JASO, GM, KS, SS, ISO
Test method / qualification dataThe table does not state the test standard, specimen, squeeze ratio, leak rate, particle release or outgassing limits. Request the applicable technical documentation.
Product image basisOriginal manufacturer photo for Morisz MPF506UP, shown as a representative material-series image. Finished dimensions are confirmed with the quotation.

Engineering guides for this part

More parts in this category

Price and lead time

Price on request
Minimum order
Confirmed with quote
Order multiple
Confirmed with quote
Availability
Quoted on request
Supply lead time
Confirmed with quote

Supply lead time is separate from shipping transit time. MST confirms the delivery schedule for your destination.

Enter the quantity you need. Minimum order and packing quantities are confirmed with the quotation.

Send your quantity and email to request a quote. MST will confirm availability, final price and delivery terms by email before you order.

Get a quote

Model
MPF506UP
MORISZ-MPF506UP-RFQ
Quantity
1
Company / Country (optional)

Selection and use

How to select

Where can it be used? Start with the manufacturer application direction above, then identify the actual sealing location, process media and static or dynamic duty. This is a selection candidate, not an equipment approval.

Which size should I order? Send the size code or inner diameter × cross-section with tolerances and groove drawing. A used ring may be distorted; record whether dimensions came from the drawing or a used part.

Which operating conditions matter? List media and mixtures, concentration, continuous and peak temperatures with duration, pressure or vacuum, motion/cycles and direct or remote plasma exposure.

Can it replace another brand? Provide the original material grade, part number and drawing. Check geometry, media response, compression set, cleanliness and process validation before accepting a substitute. No cross-brand drop-in equivalence is established here.

What should manufacturers and local distributors send? Include quantity per size, application, destination, required date and required certificates or packaging. Distributor requests may include a size list and repeat demand; commercial terms are confirmed in the quotation.

Not all parameters available? Send the known grade, a non-confidential drawing or old-part photos and explain the duty. Unknown items can be clarified during the quotation process.

Typical applications

  • Manufacturer-listed application: Specialty gas pipeline seals.
  • Catalog temperature endpoints do not qualify every chemical mixture or plasma process. Confirm the intended operating window with the supplier and equipment owner before use.
  • Compression set is reported at 200 °C for 70 h. Compare values only with compatible test methods and conditions; this number alone does not establish seal life.
  • RFQ only: price, supply, minimum order, packaging and lead time are confirmed for the selected grade and dimensions.

Frequently asked questions

What are the key specifications of MPF506UP?

MPF506UP: Brand: MORISEAL / Morisz; Manufacturer part number: MPF506UP; Material: FFKM; Color: White; Temperature range: (-5)–250 °C; Hardness (HA): 80±5. Full values are in the specifications table above.

How do I get a price for MPF506UP?

Price, availability and lead time for MPF506UP are confirmed by quotation. Send the quantity with the RFQ form on this page.

Can MST source a part number that is not listed?

Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.