Consumables
Process gases, chemicals, wafers, cleanroom supplies and other fab and lab consumables.
Can't find a part, or don't want to search? Tell MST
Describe what you need. MST checks sources and substitutes for you, and the thread stays useful to other engineers.
CAMCLEAN 9 × 9 in cleanroom wipes: WIPER-609 vs CCW-1801 vs CCW-2201
**Short answer:** all three are 9 × 9 in (about 230 × 230 mm) and ship 10 bags per carton. WIPER-609 is a light cellulose/polyester nonwoven with the lowest listed cost per wipe. CCW-1801 and CCW-2201 are microfiber wipes at 180 and 220 g/m
Silicon parts: boat, ring and showerhead selection
**Select a silicon chamber part by its process, approved drawing and material requirements—not its photograph alone.** This guide helps buyers compare silicon boats, etch rings, showerheads and RTP guard rings, prepare an enquiry and agree
Sourcing chamber quartz: what an AMAT 0200- number does not tell you, and how to read fused-quartz datasheets
**Short answer:** An OEM number such as AMAT 0200-10073 identifies a *part*, not a material grade. Public reseller listings put quartz, sapphire, ceramic, AlN and even graphite items under the same 0200- prefix, so the prefix alone doesn't
Semiconductor O-ring RFQ checklist: dimensions, operating conditions and replacement evidence
A useful semiconductor O-ring inquiry identifies the seal, its working environment and the evidence needed for acceptance. This checklist helps equipment manufacturers, maintenance teams and local distributors prepare a request even when th
Semiconductor FFKM O-ring selection: MORISEAL Morisz grades and application limits
Choosing semiconductor FFKM O-rings starts with the sealing duty, then the material grade and the finished dimensions. The same polymer family does not make every compound interchangeable. This guide organizes MORISEAL's published Morisz ma
Tungsten probe selection: tip radius, shank diameter and a length discrepancy
A request for a “7 µm tungsten probe” needs one more detail: which dimension does 7 µm describe? This MST reading example separates tip geometry from the shaft that fits into the holder. ## 1. Three rows from the manufacturer selection gui
EBARA F-REX300 PVA brushes: PVP0EF3R1 vs PVP1EF3R1 and what to check
A tool name is a useful starting point, but it does not identify every detail of the replacement brush. This MST technical note explains two manufacturer-listed references and provides a checklist for identifying the installed part. ## 1.