Engineering community
Ask, answer and compare notes on components, consumables, MPW and equipment. Can't find a part? Post it and MST will source it for you.
Can't find a part, or don't want to search? Tell MST
Describe what you need. MST checks sources and substitutes for you, and the thread stays useful to other engineers.
AS568 dash numbers for FFKM O-rings: reading cross-section families, the three "25 mm" rings, and the Kalrez shrinkage note
**Short answer:** An AS568 dash number fixes both the inside diameter (ID) and the cross-section (CS) of an O-ring. In the DuPont Kalrez AS-568 dimensions table, sizes -004 to -050 are 1.78 mm (.070 in) cross-section and the -1xx sizes are
Reading a power inductor datasheet for substitution: Isat 20 % vs 30 %, Irms temperature rise, test frequency and temperature rating
**Short answer:** Two power inductors with the same inductance and similar current numbers are often not comparable, because each maker defines the numbers differently. Before you call a part a substitute, put both datasheets on the same ba
MAZO VCMA-1040 power inductor series: all 15 values, saturation vs heating limits and how to pick one
**Short answer:** The MAZO VCMA-1040-xxx-M-1A series is a shielded, AEC-Q200 qualified power inductor family in a 11.5x10.3x4.0 mm maximum package, with 15 inductance values from 0.22 to 22.0 µH (±20 %, tested at 1 MHz / 1.0 V). Typical Isa
- VCMA-1040-R22-M-1A
- VCMA-1040-R36-M-1A
- VCMA-1040-1R0-M-1A
- VCMA-1040-2R2-M-1A
- VCMA-1040-4R7-M-1A
- VCMA-1040-XXX-M-1A
- 11.5X10.3X4.0
- VCMA-1040
- VCMA-1040-R47-M-1A
- VCMA-1040-R56-M-1A
- VCMA-1040-R68-M-1A
- VCMA-1040-1R5-M-1A
- VCMA-1040-3R3-M-1A
- VCMA-1040-6R8-M-1A
- VCMA-1040-8R2-M-1A
- VCMA-1040-100-M-1A
- VCMA-1040-150-M-1A
- VCMA-1040-220-M-1A
MAZO VCMA-0630 power inductor series: all 19 values, saturation vs heating limits and how to pick one
**Short answer:** The MAZO VCMA-0630-xxx-M-1A series is a shielded, AEC-Q200 qualified power inductor family in a 7.3x6.8x3.0 mm maximum package, with 19 inductance values from 0.22 to 22.0 µH (±20 %, tested at 1 MHz / 1.0 V). Typical Isat
- VCMA-0630-R22-M-1A
- VCMA-0630-R36-M-1A
- VCMA-0630-1R0-M-1A
- VCMA-0630-2R2-M-1A
- VCMA-0630-4R7-M-1A
- VCMA-0630-XXX-M-1A
- 7.3X6.8X3.0
- VCMA-0630
- VCMA-0630-R24-M-1A
- VCMA-0630-R33-M-1A
- VCMA-0630-R47-M-1A
- VCMA-0630-R56-M-1A
- VCMA-0630-R68-M-1A
- VCMA-0630-R82-M-1A
- VCMA-0630-1R5-M-1A
- VCMA-0630-3R3-M-1A
- VCMA-0630-5R6-M-1A
- VCMA-0630-6R8-M-1A
- VCMA-0630-8R2-M-1A
- VCMA-0630-100-M-1A
- VCMA-0630-150-M-1A
- VCMA-0630-220-M-1A
MAZO VCMA-0420 power inductor series: all 14 values, saturation vs heating limits and how to pick one
**Short answer:** The MAZO VCMA-0420-xxx-M-1A series is a shielded, AEC-Q200 qualified power inductor family in a 4.75x4.45x2.0 mm maximum package, with 14 inductance values from 0.10 to 10.0 µH (±20 %, tested at 1 MHz / 1.0 V). Typical Isa
LQH3NPN100NG0L replacement: a power inductor cross-reference walkthrough (Murata 10 µH, 3 × 3 mm)
**Short answer:** Murata's product page lists LQH3NPN100NG0# (L = 180 mm reel, K = 330 mm reel) as **discontinued**: last-time order 3/31/2018, end of production 9/30/2018. Murata names **LQH3NPN100MJR#** as the alternative product. Coilcra
MKS vs Brooks mass flow controller substitution: a drop-in checklist (gas, range, fittings, I/O, power, response)
**Short answer:** "Same full scale" doesn't make an MFC a drop-in. Before an MKS unit replaces a Brooks unit (or the other way round), check seven things: **gas and calibration, full-scale range, fittings and length, I/O type and connector/
How to write an FFKM O-ring RFQ that actually gets quoted (size, compound, process, chemistry, quantity)
**Short answer:** An O-ring request that says only "Kalrez O-ring, 25 mm" cannot be quoted. A supplier needs two separate things: the **size** (an AS568 dash number, an ISO 3601 / JIS size, or ID × cross-section with tolerances) and the **c
SRP1038A-R36M: Bourns 0.36 µH power inductor specs and MAZO candidates to verify
**Short answer:** SRP1038A-R36M is a Bourns SRP1038A-series shielded power inductor: 0.36 µH ±20 % (100 kHz, 1 V), DCR 1.05 mΩ typical / 1.2 mΩ maximum, Irms 31 A, Isat 60 A (20 % inductance drop), body 11.0 × 10.0 × 3.8 mm. Values below ar
XAL4020-221MEC: Coilcraft 0.22 µH power inductor datasheet values and RFQ notes
**Short answer:** XAL4020-221MEC is a Coilcraft XAL4020-series shielded power inductor: 0.22 µH ±20 %, DCR 5.81 mΩ typical / 6.40 mΩ maximum, Isat 18.7 A (30 % inductance drop, typical), Irms 12.0 A (20 °C rise) / 16.8 A (40 °C rise), on a
Sourcing chamber quartz: what an AMAT 0200- number does not tell you, and how to read fused-quartz datasheets
**Short answer:** An OEM number such as AMAT 0200-10073 identifies a *part*, not a material grade. Public reseller listings put quartz, sapphire, ceramic, AlN and even graphite items under the same 0200- prefix, so the prefix alone doesn't
VAT pendulum valve seal kits: finding the right part number in the 650/655 manuals
**Short answer:** VAT ties spare parts to the valve's **fabrication number** (on the label). Its manuals say to quote that number when ordering, because the ordering number alone doesn't pin down seal material or variant. In the Series 650
Kalrez 9100 vs 9300 vs 9500 vs 9600: reading DuPont's semiconductor selector guides before an FFKM RFQ
**Short answer:** DuPont splits its semiconductor Kalrez recommendations across three 4-page selector guides: Plasma (KZE-A40111), Thermal (KZE-A40112) and Wet (KZE-A40110). In the plasma guide, 9100/9500 are listed for HDPCVD, 9600 for PEC
Neuro Box E5200 hardware reference: ports, power and storage checks
This MST technical note summarizes the Neuro E5200 AI BOX user manual dated 2026-08-13. It covers the touch-screen hardware sold in the MST Store. It is not the specification of every product carrying the NeuroBox name. ## Hardware identif
Semiconductor O-ring RFQ checklist: dimensions, operating conditions and replacement evidence
A useful semiconductor O-ring inquiry identifies the seal, its working environment and the evidence needed for acceptance. This checklist helps equipment manufacturers, maintenance teams and local distributors prepare a request even when th
Semiconductor FFKM O-ring selection: MORISEAL Morisz grades and application limits
Choosing semiconductor FFKM O-rings starts with the sealing duty, then the material grade and the finished dimensions. The same polymer family does not make every compound interchangeable. This guide organizes MORISEAL's published Morisz ma
Can VCMA-0420-R22-M-1A replace XAL4020-221MEC? A datasheet comparison
Interchangeability has not been established. These two inductors share a nominal inductance, but a replacement decision also needs electrical test conditions, thermal limits and the PCB land pattern. This is an MST document comparison, not
Tungsten probe selection: tip radius, shank diameter and a length discrepancy
A request for a “7 µm tungsten probe” needs one more detail: which dimension does 7 µm describe? This MST reading example separates tip geometry from the shaft that fits into the holder. ## 1. Three rows from the manufacturer selection gui
EBARA F-REX300 PVA brushes: PVP0EF3R1 vs PVP1EF3R1 and what to check
A tool name is a useful starting point, but it does not identify every detail of the replacement brush. This MST technical note explains two manufacturer-listed references and provides a checklist for identifying the installed part. ## 1.