MST
RFQ cartCart
VCMA-0530-R33-M-1A

MAZO 0.33 µH shielded power inductor, Idc 16 A typ. – Alternative to TDK SPM5030T-R35M

Inductance
0.33 µH
Isat
19 A
Idc
16 A
DCR max
5 mΩ
Brand
MAZO
Series
VCMA-0530
Size
5.7 × 5.4 × 3 mm
Related applications
Automotive / OBC
Features
AEC-Q200RoHSHalogen free
Stock
Factory stock

Applications and industries

Industries: Automotive · AEC-Q200 qualified

Manufacturer-listed applications: Automotive applications (datasheet); ADAS, cockpit, powertrain, body and central domain controllers (MAZO application areas)

MST engineering note — typical circuits: 12 V battery buck to 5 V / 3.3 V / core rails, SoC and ADAS processor point-of-load, LED driver and SEPIC / buck-boost stages. Low-to-mid current rails in compact modules.

Sources: VCMA-0530 datasheet · MAZO application areas

Selection tips

Selection tips

  • Keep the peak current (DC load plus half the ripple) below Isat 19 A; Isat is 1.2× the 16 A heating-current rating.
  • Copper loss at 16 A with DCR max 5 mΩ is about 1.28 W (I² × DCR); size copper and airflow for it.
  • Use on rails at or below the 50 V rated voltage.
  • Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
  • AEC-Q200 is stated on the datasheet, so the part can enter an automotive qualification plan.
MST engineering note, computed from the published specifications above. Request a quote.

Specifications

Inductance L00.33 µH ±20% (1 MHz, 1.0 V)
DCR typ.4.5 mΩ
DCR max.5 mΩ
Heating current Idc typ.16 A
Heating current Idc max.15 A
Saturation current Isat typ.19 A
Saturation current Isat max.18 A
Rated voltage max.50 V
Package5.7 × 5.4 × 3.0 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
BrandMAZO / Mazotech
ApplicationsAutomotive applications

Datasheet facts

2.22.51.96
Recommended land pattern (mm)
Recommended land pattern
Two 2.5 × 1.9 mm pads, 2.2 mm apart, 6 mm overall
Inductance test condition
1 MHz, 1.0 V, 25 °C
Current definitions
Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
Soldering
Reflow per J-STD-020
Operating temperature (ambient + self-heating)
-55 ~ +125 °C
Storage temperature
-55 ~ +125 °C
Packaging
2000 pieces per reel; tape pocket 5.7±0.10 × 5.9±0.10 × 3.3±0.15 mm

Datasheet VCMA-0530-XXX-M-1A, revision A2, 2025-11-26, page 4

Characteristic curves

Inductance vs DC biasCSV
00.10.20.30.40102030Isat 19 ADC current (A)Inductance (µH)
Temperature rise vs currentCSV
0204060801000102030Idc 16 ADC current (A)Temperature rise (°C)

Typical curves from the MAZO datasheet, for reference only.

Soldering and packaging

Alternative to these parts

VCMA-0530-R33-M-1A matches the parts below in footprint class and nominal value. Request a quote.

BrandPart numberLIsatIrmsDCR maxSizeFootprintRecommended padsVCMA-0530-R33-M-1A vs. this part
TDKSPM5030T-R35MSPM5030T0.35 µH14.9 A · 20%16.6 A · 40 °C4.29 mΩ5.2 × 5 × 3 mmPad-compatible2.2 × 1.5 mm, gap 2.7 mmClose to MAZO (0.5 mm off)With design margin
BournsSRP5030TA-R33MSRP5030TA0.33 µH18 A · 20%14 A · 40 °C5 mΩ5.7 × 5.3 × 3 mmSame footprint class1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off)Figures qualify; check the pads
CyntecVCMT053T-R33MN52MVCMT053T MN52M0.33 µH11.2 A · 20%16.7 A · 40 °C5 mΩ5.45 × 5.25 × 3 mmSame footprint class2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off)Figures qualify; check the pads
VishayIHLP2020CZERR33M01IHLP-2020CZ-010.33 µH19 A · 20%13.7 A · 40 °C6.1 mΩ5.18 × 5.49 × 3 mmSame footprint class2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off)Figures qualify; check the pads
BournsSRP5030CA-R33MSRP5030CA0.33 µH28 A · 30%19.2 A · 40 °C3.52 mΩ5.5 × 5.3 × 3.1 mmSame footprint class4.7 × 1.25 mm, gap 2 mmDiffers from MAZO (2.2 mm off)Weaker figures
CoilcraftXAL5030-331MECXAL50300.33 µH26 A · 30%19.2 A · 40 °C3.52 mΩ5.28 × 5.48 × 3.1 mmSame footprint class4.7 × 1.18 mm, gap 2.13 mmDiffers from MAZO (2.2 mm off)Weaker figures
Würth Elektronik744373360033WE-LHMI 50300.33 µH29.3 A · 30%15.1 A · 40 °C5 mΩ5.7 × 5.2 × 3 mmSame footprint class1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off)Weaker figures
Würth Elektronik744393340033WE-XHMI 50300.33 µH33.3 A · 30%21.2 A · 40 °C3.88 mΩ5.55 × 5.35 × 3 mmSame footprint class4.8 × 1.3 mm, gap 2.05 mmDiffers from MAZO (2.3 mm off)Weaker figures
What each comparison means (8)
  1. TDK SPM5030T-R35M: Close inductance, 0.35 µH vs MAZO 0.33 µH. Saturation current 14.9 A (20% drop) vs MAZO 19 A typ. (30% drop), rated on different bases so not directly comparable; heating current 16.6 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 4.29 mΩ max vs MAZO 5 mΩ max. Body 5.2 × 5 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern close to MAZO's: two 2.2 × 1.5 mm pads 2.7 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (gap differs by 0.5 mm). Verdict: replaceable with design margin (Idc about 4% lower at 40 °C rise, DCR slightly higher). Request a quote.
  2. Bourns SRP5030TA-R33M: Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 18 A (20% drop) vs MAZO 19 A typ. (30% drop), rated on different bases so not directly comparable; heating current 14 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 5 mΩ max vs MAZO 5 mΩ max. Body 5.7 × 5.3 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR equal). Request a quote. Both parts are AEC-Q200.
  3. Cyntec VCMT053T-R33MN52M (VCMT053T MN52M): Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 11.2 A (20% drop) vs MAZO 19 A typ. (30% drop), rated on different bases so not directly comparable; heating current 16.7 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 5 mΩ max vs MAZO 5 mΩ max. Body 5.45 × 5.25 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: the figures qualify, but the pads need checking (Idc about 4% lower at 40 °C rise, DCR equal). Request a quote. Both parts are AEC-Q200.
  4. Vishay IHLP2020CZERR33M01 (IHLP-2020CZ-01): Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 19 A (20% drop) vs MAZO 19 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.7 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 6.1 mΩ max vs MAZO 5 mΩ max. Body 5.18 × 5.49 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
  5. Bourns SRP5030CA-R33M: Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 28 A (30% drop) vs MAZO 19 A typ. (30% drop); heating current 19.2 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 3.52 mΩ max vs MAZO 5 mΩ max. Body 5.5 × 5.3 × 3.1 mm vs MAZO 5.7 × 5.4 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 4.7 × 1.25 mm pads 2 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 32% lower, Idc about 17% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
  6. Coilcraft XAL5030-331MEC: Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 26 A (30% drop) vs MAZO 19 A typ. (30% drop); heating current 19.2 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 3.52 mΩ max vs MAZO 5 mΩ max. Body 5.28 × 5.48 × 3.1 mm vs MAZO 5.7 × 5.4 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 4.7 × 1.18 mm pads 2.13 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 27% lower, Idc about 17% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
  7. Würth Elektronik 744373360033 (WE-LHMI 5030): Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 29.3 A (30% drop) vs MAZO 19 A typ. (30% drop); heating current 15.1 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 5 mΩ max vs MAZO 5 mΩ max. Body 5.7 × 5.2 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 35% lower, Idc not lower at 40 °C rise, DCR equal). Request a quote.
  8. Würth Elektronik 744393340033 (WE-XHMI 5030): Same inductance, 0.33 µH vs MAZO 0.33 µH. Saturation current 33.3 A (30% drop) vs MAZO 19 A typ. (30% drop); heating current 21.2 A (40 °C rise) vs MAZO 16 A typ. (40 °C rise). DCR 3.88 mΩ max vs MAZO 5 mΩ max. Body 5.55 × 5.35 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 4.8 × 1.3 mm pads 2.05 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.3 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 43% lower, Idc about 25% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
How the figures are compared

Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.

Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.

More parts in this category

Same footprint, other values

Same 5.7 × 5.4 mm body, by inductance.

Part numberLIsatIdcDCR maxHeightUnit price
VCMA-0530-R47-M-1A0.47 µH18 A10 A8.5 mΩ3 mm$0.30
VCMA-0530-R68-M-1A0.68 µH15 A9 A9.8 mΩ3 mm$0.30
VCMA-0530-1R0-M-1A1 µH11 A8.5 A13 mΩ3 mm$0.30
VCMA-0530-1R5-M-1A1.5 µH10 A8 A18 mΩ3 mm$0.30
VCMA-0530-2R2-M-1A2.2 µH8.5 A5.5 A26 mΩ3 mm$0.30
VCMA-0530-3R3-M-1A3.3 µH7.5 A4.8 A37 mΩ3 mm$0.27
VCMA-0530-4R7-M-1A4.7 µH5.5 A3.5 A58 mΩ3 mm$0.30
VCMA-0530-6R8-M-1A6.8 µH4 A3 A90 mΩ3 mm$0.33
VCMA-0530-100-M-1A10 µH3 A2.5 A125 mΩ3 mm$0.20

Same value, other sizes

Smallest first. A larger body usually carries more current; the pads differ.

Part numberLIsatIdcDCR maxBodyUnit price
VCMA-0420-R33-M-1A0.33 µH16 A10 A8 mΩ4.75 × 4.45 × 2 mm$0.21
VCMA-0630-R33-M-1A0.33 µH27 A21.5 A3.5 mΩ7.3 × 6.8 × 3 mm$0.30
VCMA-1350-R33-M-1A0.33 µH66 A46 A0.69 mΩ13.8 × 12.9 × 5 mm$0.75

Buy

Unit price · USD / piece$0.29For 5 pieces
Quantity pricingSelect a tier to set the quantity.
QuantityUnit priceExtended
5–49$0.29$1.45
50–149$0.21$10.50
150–499$0.164$24.60
500–2999$0.135$67.50
Merchandise subtotal$1.45Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Minimum order
5 pieces
Order multiple
1 piece
Availability
Factory stock
Dispatch preparation
2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.

Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.

Minimum order: 5; order in multiples of 1.
PackagingFor the selected quantity
Standard full-reel quantity
2000 pieces
Packed as
Cut tape · 5 pieces
Cut-tape fee
None
Online order limit
2999 pieces

Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.

Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.

Can't find it? We'll source it — and check it fits.

Not sure it fits your tool/process? Ask an engineer to check

An MST engineer will review your requirement and reply to help with sourcing and compatibility.

Request sourcing & fit check

Selection and use

How to select

Choosing inductance

L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.33–10 µH in one body, so changing the value needs no new layout.

Saturation current Isat

the current at which inductance falls about 30%; keep the peak current below it.

Heating current Idc

the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.

DC resistance

sets the conduction loss. Typical 4.5–110 mΩ across the series; use the maximum for loss budgets.

Rated voltage

50 V maximum; check it against the input voltage.

Height

Max 3.0 mm. Lower: VCMA-0420; same height, more current: VCMA-0630.

Industry and product applications

VCMA-0530-R33-M-1A is a VCMA-0530 series part for evaluation in automotive electronics.

Manufacturer-listed series applications

Automotive applications.

MAZO datasheet: VCMA-0530-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1

Circuit applications to evaluate

  • Body electronics
  • Infotainment
  • Camera and radar modules
  • LED drivers and backlight
  • BMS and on-board charger auxiliary supplies

These are series applications and engineering evaluation examples. Select VCMA-0530-R33-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.

Frequently asked questions

What are the key specifications of VCMA-0530-R33-M-1A?

VCMA-0530-R33-M-1A: Inductance L0: 0.33 µH ±20% (1 MHz, 1.0 V); DCR typ.: 4.5 mΩ; DCR max.: 5 mΩ; Heating current Idc typ.: 16 A; Heating current Idc max.: 15 A; Saturation current Isat typ.: 19 A. Full values are in the specifications table above.

Which parts can VCMA-0530-R33-M-1A be evaluated as an alternative to?

VCMA-0530-R33-M-1A is listed as an alternative to TDK SPM5030T-R35M, Bourns SRP5030TA-R33M, Cyntec VCMT053T-R33MN52M, Vishay IHLP2020CZERR33M01, Bourns SRP5030CA-R33M, Coilcraft XAL5030-331MEC (same footprint class and nominal value). Request a quote with the RFQ form on this page.

What does VCMA-0530-R33-M-1A cost?

VCMA-0530-R33-M-1A is US$0.29 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.

Can MST source a part number that is not listed?

Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.