MST
RFQ cartCart
VCMA-0530-100-M-1A

MAZO 10 µH shielded power inductor, Idc 2.5 A typ. – Alternative to TDK SPM5030T-100M-HZ

Inductance
10 µH
Isat
3 A
Idc
2.5 A
DCR max
125 mΩ
Brand
MAZO
Series
VCMA-0530
Size
5.7 × 5.4 × 3 mm
Related applications
Automotive / OBC
Features
AEC-Q200RoHSHalogen free
Stock
Factory stock

Applications and industries

Industries: Automotive · AEC-Q200 qualified

Manufacturer-listed applications: Automotive applications (datasheet); ADAS, cockpit, powertrain, body and central domain controllers (MAZO application areas)

MST engineering note — typical circuits: 12 V battery buck to 5 V / 3.3 V / core rails, SoC and ADAS processor point-of-load, LED driver and SEPIC / buck-boost stages. Low-to-mid current rails in compact modules.

Sources: VCMA-0530 datasheet · MAZO application areas

Selection tips

Selection tips

  • Keep the peak current (DC load plus half the ripple) below Isat 3 A; Isat is 1.2× the 2.5 A heating-current rating.
  • Copper loss at 2.5 A with DCR max 125 mΩ is about 0.78 W (I² × DCR); size copper and airflow for it.
  • Use on rails at or below the 50 V rated voltage.
  • Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
  • AEC-Q200 is stated on the datasheet, so the part can enter an automotive qualification plan.
MST engineering note, computed from the published specifications above. Request a quote.

Specifications

BrandMAZO / Mazotech
SeriesVCMA-0530
Inductance L010 µH ±20% (1 MHz, 1.0 V)
DCR typ.110 mΩ
DCR max.125 mΩ
Heating current Idc typ.2.5 A
Heating current Idc max.2.2 A
Saturation current Isat typ.3 A
Saturation current Isat max.2.7 A
Rated voltage max.50 V
Package5.7 × 5.4 × 3.0 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
ApplicationsAutomotive applications

Datasheet facts

2.22.51.96
Recommended land pattern (mm)
Recommended land pattern
Two 2.5 × 1.9 mm pads, 2.2 mm apart, 6 mm overall
Inductance test condition
1 MHz, 1.0 V, 25 °C
Current definitions
Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
Soldering
Reflow per J-STD-020
Operating temperature (ambient + self-heating)
-55 ~ +125 °C
Storage temperature
-55 ~ +125 °C
Packaging
2000 pieces per reel; tape pocket 5.7±0.10 × 5.9±0.10 × 3.3±0.15 mm

Datasheet VCMA-0530-XXX-M-1A, revision A2, 2025-11-26, page 4

Characteristic curves

Inductance vs DC biasCSV
02.557.51012.5012345Isat 3 ADC current (A)Inductance (µH)
Temperature rise vs currentCSV
0255075100125012345Idc 2.5 ADC current (A)Temperature rise (°C)

Typical curves from the MAZO datasheet, for reference only.

Soldering and packaging

Alternative to these parts

VCMA-0530-100-M-1A matches the parts below in footprint class and nominal value. Request a quote.

BrandPart numberLIsatIrmsDCR maxSizeFootprintRecommended padsVCMA-0530-100-M-1A vs. this part
TDKSPM5030T-100M-HZSPM5030T-HZ10 µH2.6 A · 20%2.9 A · 40 °C159 mΩ5.2 × 5 × 3 mmPad-compatible2.2 × 1.5 mm, gap 2.7 mmClose to MAZO (0.5 mm off)With design margin
BournsSRP5030TA-100MSRP5030TA10 µH3.5 A · 20%2.75 A · 40 °C128 mΩ5.7 × 5.3 × 3 mmSame footprint class1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off)With margin; check the pads
CyntecVCMT053T-100MN52MVCMT053T MN52M10 µH2.35 A · 20%2.8 A · 40 °C129.5 mΩ5.45 × 5.25 × 3 mmSame footprint class2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off)With margin; check the pads
VishayIHLP2020CZER100M01IHLP-2020CZ-0110 µH4 A · 20%2.5 A · 40 °C164 mΩ5.18 × 5.49 × 3 mmSame footprint class2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off)With margin; check the pads
CoilcraftXAL5050-103MECXAL505010 µH4.9 A · 30%4.9 A · 40 °C45 mΩ5.28 × 5.48 × 5.1 mmSame footprint class4.7 × 1.18 mm, gap 2.13 mmDiffers from MAZO (2.2 mm off)Weaker figures
Würth Elektronik74437336100WE-LHMI 503010 µH5.35 A · 30%2.9 A · 40 °C128 mΩ5.7 × 5.2 × 3 mmSame footprint class1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off)Weaker figures
What each comparison means (6)
  1. TDK SPM5030T-100M-HZ (SPM5030T-HZ): Same inductance, 10 µH vs MAZO 10 µH. Saturation current 2.6 A (20% drop) vs MAZO 3 A typ. (30% drop), rated on different bases so not directly comparable; heating current 2.9 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 159 mΩ max vs MAZO 125 mΩ max. Body 5.2 × 5 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern close to MAZO's: two 2.2 × 1.5 mm pads 2.7 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (gap differs by 0.5 mm). Verdict: replaceable with design margin (Idc about 14% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  2. Bourns SRP5030TA-100M: Same inductance, 10 µH vs MAZO 10 µH. Saturation current 3.5 A (20% drop) vs MAZO 3 A typ. (30% drop), rated on different bases so not directly comparable; heating current 2.75 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 128 mΩ max vs MAZO 125 mΩ max. Body 5.7 × 5.3 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: replaceable with design margin, pads need checking (Idc about 9% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  3. Cyntec VCMT053T-100MN52M (VCMT053T MN52M): Same inductance, 10 µH vs MAZO 10 µH. Saturation current 2.35 A (20% drop) vs MAZO 3 A typ. (30% drop), rated on different bases so not directly comparable; heating current 2.8 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 129.5 mΩ max vs MAZO 125 mΩ max. Body 5.45 × 5.25 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc about 11% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
  4. Vishay IHLP2020CZER100M01 (IHLP-2020CZ-01): Same inductance, 10 µH vs MAZO 10 µH. Saturation current 4 A (20% drop) vs MAZO 3 A typ. (30% drop), rated on different bases so not directly comparable; heating current 2.5 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 164 mΩ max vs MAZO 125 mΩ max. Body 5.18 × 5.49 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
  5. Coilcraft XAL5050-103MEC: Same inductance, 10 µH vs MAZO 10 µH. Saturation current 4.9 A (30% drop) vs MAZO 3 A typ. (30% drop); heating current 4.9 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 45 mΩ max vs MAZO 125 mΩ max. Body 5.28 × 5.48 × 5.1 mm vs MAZO 5.7 × 5.4 × 3 mm, MAZO 2.1 mm lower. Land pattern differs from MAZO's: two 4.7 × 1.18 mm pads 2.13 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 39% lower, Idc about 49% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
  6. Würth Elektronik 74437336100 (WE-LHMI 5030): Same inductance, 10 µH vs MAZO 10 µH. Saturation current 5.35 A (30% drop) vs MAZO 3 A typ. (30% drop); heating current 2.9 A (40 °C rise) vs MAZO 2.5 A typ. (40 °C rise). DCR 128 mΩ max vs MAZO 125 mΩ max. Body 5.7 × 5.2 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 44% lower, Idc about 14% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
How the figures are compared

Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.

Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.

More parts in this category

Same footprint, other values

Same 5.7 × 5.4 mm body, by inductance.

Part numberLIsatIdcDCR maxHeightUnit price
VCMA-0530-R33-M-1A0.33 µH19 A16 A5 mΩ3 mm$0.29
VCMA-0530-R47-M-1A0.47 µH18 A10 A8.5 mΩ3 mm$0.30
VCMA-0530-R68-M-1A0.68 µH15 A9 A9.8 mΩ3 mm$0.30
VCMA-0530-1R0-M-1A1 µH11 A8.5 A13 mΩ3 mm$0.30
VCMA-0530-1R5-M-1A1.5 µH10 A8 A18 mΩ3 mm$0.30
VCMA-0530-2R2-M-1A2.2 µH8.5 A5.5 A26 mΩ3 mm$0.30
VCMA-0530-3R3-M-1A3.3 µH7.5 A4.8 A37 mΩ3 mm$0.27
VCMA-0530-4R7-M-1A4.7 µH5.5 A3.5 A58 mΩ3 mm$0.30
VCMA-0530-6R8-M-1A6.8 µH4 A3 A90 mΩ3 mm$0.33

Same value, other sizes

Smallest first. A larger body usually carries more current; the pads differ.

Part numberLIsatIdcDCR maxBodyUnit price
VCMA-0420-100-M-1A10 µH2.2 A1.7 A281 mΩ4.75 × 4.45 × 2 mm$0.41
VCMA-0630-100-M-1A10 µH5.5 A4.1 A67 mΩ7.3 × 6.8 × 3 mm$0.21
VCMA-1040-100-M-1A10 µH9 A7.2 A30 mΩ11.5 × 10.3 × 4 mm$0.62
VCMA-1350-100-M-1A10 µH14 A8.5 A21.5 mΩ13.8 × 12.9 × 5 mm$0.75
VCMA-1365-100-M-1A10 µH18 A15 A17 mΩ13.8 × 12.9 × 6.5 mm$0.93

Buy

Unit price · USD / piece$0.20For 5 pieces
Quantity pricingSelect a tier to set the quantity.
QuantityUnit priceExtended
5–49$0.2$1.00
50–149$0.14$7.00
150–499$0.112$16.80
500–2999$0.101$50.50
Merchandise subtotal$1.00Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Minimum order
5 pieces
Order multiple
1 piece
Availability
Factory stock
Dispatch preparation
2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.

Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.

Minimum order: 5; order in multiples of 1.
PackagingFor the selected quantity
Standard full-reel quantity
2000 pieces
Packed as
Cut tape · 5 pieces
Cut-tape fee
None
Online order limit
2999 pieces

Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.

Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.

Can't find it? We'll source it — and check it fits.

Not sure it fits your tool/process? Ask an engineer to check

An MST engineer will review your requirement and reply to help with sourcing and compatibility.

Request sourcing & fit check

Selection and use

How to select

Choosing inductance

L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.33–10 µH in one body, so changing the value needs no new layout.

Saturation current Isat

the current at which inductance falls about 30%; keep the peak current below it.

Heating current Idc

the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.

DC resistance

sets the conduction loss. Typical 4.5–110 mΩ across the series; use the maximum for loss budgets.

Rated voltage

50 V maximum; check it against the input voltage.

Height

Max 3.0 mm. Lower: VCMA-0420; same height, more current: VCMA-0630.

Industry and product applications

VCMA-0530-100-M-1A is a VCMA-0530 series part for evaluation in automotive electronics.

Manufacturer-listed series applications

Automotive applications.

MAZO datasheet: VCMA-0530-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1

Circuit applications to evaluate

  • Body electronics
  • Infotainment
  • Camera and radar modules
  • LED drivers and backlight
  • BMS and on-board charger auxiliary supplies

These are series applications and engineering evaluation examples. Select VCMA-0530-100-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.

Frequently asked questions

What are the key specifications of VCMA-0530-100-M-1A?

VCMA-0530-100-M-1A: Brand: MAZO / Mazotech; Series: VCMA-0530; Inductance L0: 10 µH ±20% (1 MHz, 1.0 V); DCR typ.: 110 mΩ; DCR max.: 125 mΩ; Heating current Idc typ.: 2.5 A. Full values are in the specifications table above.

Which parts can VCMA-0530-100-M-1A be evaluated as an alternative to?

VCMA-0530-100-M-1A is listed as an alternative to TDK SPM5030T-100M-HZ, Bourns SRP5030TA-100M, Cyntec VCMT053T-100MN52M, Vishay IHLP2020CZER100M01, Coilcraft XAL5050-103MEC, Würth Elektronik 74437336100 (same footprint class and nominal value). Request a quote with the RFQ form on this page.

What does VCMA-0530-100-M-1A cost?

VCMA-0530-100-M-1A is US$0.20 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.

Can MST source a part number that is not listed?

Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.