MAZO 1 µH shielded power inductor, Idc 19 A typ. – Alternative to Würth Elektronik 74437368010
- Inductance
- 1 µH
- Isat
- 29 A
- Idc
- 19 A
- DCR max
- 3.1 mΩ
- Brand
- MAZO
- Series
- VCMA-1040
- Size
- 11.5 × 10.3 × 4 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200RoHSHalogen free
- Stock
- Factory stock

Applications and industries
Industries: Automotive · AEC-Q200 qualified
Manufacturer-listed applications: Automotive applications (datasheet); ADAS, cockpit, powertrain, body and central domain controllers (MAZO application areas)
MST engineering note — typical circuits: 12 V battery buck to 5 V / 3.3 V / core rails, SoC and ADAS processor point-of-load, LED driver and SEPIC / buck-boost stages. Mid-to-high current rails.
Sources: VCMA-1040 datasheet · MAZO application areas
Selection tips
Selection tips
- Keep the peak current (DC load plus half the ripple) below Isat 29 A; Isat is 1.5× the 19 A heating-current rating.
- Copper loss at 19 A with DCR max 3.1 mΩ is about 1.12 W (I² × DCR); size copper and airflow for it.
- Use on rails at or below the 75 V rated voltage.
- Operating temperature -55 °C to +125 °C includes self-heating, so ambient plus temperature rise must stay inside it.
- AEC-Q200 is stated on the datasheet, so the part can enter an automotive qualification plan.
Specifications
Datasheet facts
- Recommended land pattern
- Two 4.1 × 4.1 mm pads, 5.4 mm apart, 13.6 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 10.7±0.10 × 12.0±0.10 × 4.5±0.10 mm
Datasheet VCMA-1040-XXX-M-1A, revision A2, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-1040-1R0-M-1A matches the parts below in footprint class and nominal value. Request a quote.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-1040-1R0-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Würth Elektronik | 74437368010WE-LHMI 1040 | 1 µH | 22.7 A · 10% | 21.3 A · 40 °C | 3.3 mΩ | 11 × 10 × 3.8 mm | Pad-compatible | 3.5 × 4.1 mm, gap 5.4 mmClose to MAZO (0.6 mm off) | With design margin |
| TDK | SPM10040T-1R0MSPM10040T | 1 µH | 18 A · 20% | 15 A · 40 °C | 4.29 mΩ | 10.7 × 10 × 4 mm | Same footprint class | 4.8 × 3.8 mm, gap 6.1 mmDiffers from MAZO (0.7 mm off) | Figures qualify; check the pads |
| Coilcraft | XAL1030-102MECXAL1030 | 1 µH | 35 A · 30% | 23 A · 40 °C | 4.95 mΩ | 11.3 × 10 × 3.1 mm | Same footprint class | 9 × 2.38 mm, gap 4.27 mmDiffers from MAZO (4.9 mm off) | With margin; check the pads |
| Cyntec | VCMT104T-1R0MN54MVCMT104T MN54M | 1 µH | 20.4 A · 20% | 23.7 A · 40 °C | 3.1 mΩ | 10.85 × 10 × 3.8 mm | Same footprint class | 4.953 × 3.175 mm, gap 5.842 mmDiffers from MAZO (1.408 mm off) | With margin; check the pads |
| Cyntec | VCMV104T-1R0MN23MVCMV104T MN23M | 1 µH | 35 A · 20% | 23 A · 40 °C | 4.1 mΩ | 10.85 × 10 × 3.8 mm | Same footprint class | 3.251 × 3.124 mm, gap 5.817 mmDiffers from MAZO (1.535 mm off) | With margin; check the pads |
| Vishay | IHLP4040DZER1R0M01IHLP-4040DZ-01 | 1 µH | 36 A · 20% | 17.5 A · 40 °C | 4.1 mΩ | 10.8 × 10.16 × 4 mm | Same footprint class | 3.251 × 3.124 mm, gap 5.817 mmDiffers from MAZO (1.535 mm off) | With margin; check the pads |
| Vishay | IHLP4040DZER1R0M5AIHLP-4040DZ-5A | 1 µH | 24 A · 20% | 23.5 A · 40 °C | 3.07 mΩ | 10.8 × 10.2 × 4 mm | Same footprint class | 4.953 × 3.175 mm, gap 5.842 mmDiffers from MAZO (1.408 mm off) | With margin; check the pads |
| Bourns | SRP1040VA-1R0MSRP1040VA | 1 µH | 29 A · 30% | 27 A · 40 °C | 3.07 mΩ | 11 × 10 × 3.8 mm | Same footprint class | 3.5 × 3.55 mm, gap 5.4 mmDiffers from MAZO (1.1 mm off) | Weaker figures |
| TDK | SPM10040T-1R0M-HZRSPM10040T-HZR | 1 µH | 22.1 A · 20% | — | 3.82 mΩ | 10.7 × 10 × 4 mm | Same footprint class | 4.8 × 3.8 mm, gap 6.1 mmDiffers from MAZO (0.7 mm off) | Not enough data |
What each comparison means (9)
- Würth Elektronik 74437368010 (WE-LHMI 1040): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 22.7 A (10% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 21.3 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 3.3 mΩ max vs MAZO 3.1 mΩ max. Body 11 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 3.5 × 4.1 mm pads 5.4 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 0.6 mm). Verdict: replaceable with design margin (Idc about 11% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
- TDK SPM10040T-1R0M: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 18 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 15 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 4.29 mΩ max vs MAZO 3.1 mΩ max. Body 10.7 × 10 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 4.8 × 3.8 mm pads 6.1 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 0.7 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
- Coilcraft XAL1030-102MEC: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 35 A (30% drop) vs MAZO 29 A typ. (30% drop); heating current 23 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 4.95 mΩ max vs MAZO 3.1 mΩ max. Body 11.3 × 10 × 3.1 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.9 mm taller. Land pattern differs from MAZO's: two 9 × 2.38 mm pads 4.27 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 4.9 mm). Verdict: replaceable with design margin, pads need checking (MAZO Isat about 17% lower, Idc about 17% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
- Cyntec VCMT104T-1R0MN54M (VCMT104T MN54M): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 20.4 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 23.7 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 3.1 mΩ max vs MAZO 3.1 mΩ max. Body 10.85 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 4.953 × 3.175 mm pads 5.842 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.408 mm). Verdict: replaceable with design margin, pads need checking (Idc about 20% lower at 40 °C rise, DCR equal). Request a quote. Both parts are AEC-Q200.
- Cyntec VCMV104T-1R0MN23M (VCMV104T MN23M): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 35 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 23 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 4.1 mΩ max vs MAZO 3.1 mΩ max. Body 10.85 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 3.251 × 3.124 mm pads 5.817 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.535 mm). Verdict: replaceable with design margin, pads need checking (Idc about 17% lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
- Vishay IHLP4040DZER1R0M01 (IHLP-4040DZ-01): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 36 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 17.5 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 4.1 mΩ max vs MAZO 3.1 mΩ max. Body 10.8 × 10.16 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 3.251 × 3.124 mm pads 5.817 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.535 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Request a quote.
- Vishay IHLP4040DZER1R0M5A (IHLP-4040DZ-5A): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 24 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable; heating current 23.5 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 3.07 mΩ max vs MAZO 3.1 mΩ max. Body 10.8 × 10.2 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 4.953 × 3.175 mm pads 5.842 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.408 mm). Verdict: replaceable with design margin, pads need checking (Idc about 19% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
- Bourns SRP1040VA-1R0M: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 29 A (30% drop) vs MAZO 29 A typ. (30% drop); heating current 27 A (40 °C rise) vs MAZO 19 A typ. (40 °C rise). DCR 3.07 mΩ max vs MAZO 3.1 mΩ max. Body 11 × 10 × 3.8 mm vs MAZO 11.5 × 10.3 × 4 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 3.5 × 3.55 mm pads 5.4 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (overall span differs by 1.1 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat not lower, Idc about 30% lower at 40 °C rise, DCR slightly higher). Request a quote. Both parts are AEC-Q200.
- TDK SPM10040T-1R0M-HZR (SPM10040T-HZR): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 22.1 A (20% drop) vs MAZO 29 A typ. (30% drop), rated on different bases so not directly comparable. DCR 3.82 mΩ typ vs MAZO 2.6 mΩ typ. Body 10.7 × 10 × 4 mm vs MAZO 11.5 × 10.3 × 4 mm. Land pattern differs from MAZO's: two 4.8 × 3.8 mm pads 6.1 mm apart vs MAZO two 4.1 × 4.1 mm pads 5.4 mm apart (pad width differs by 0.7 mm). Verdict: unverified (DCR lower, less conduction loss). Request a quote. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Engineering guides for this part
More parts in this category
- MAZO 0.47 µH 19 A shielded power inductor
- MAZO 0.56 µH 75 V shielded power inductor
- MAZO 0.68 µH 16 A shielded power inductor
- MAZO 0.82 µH 14.5 A shielded power inductor
- MAZO 10 µH 75 V shielded power inductor
- MAZO 15 µH 7.5 A shielded power inductor
- MAZO 1.5 µH 17 A shielded power inductor
- MAZO 22 µH 5 A shielded power inductor
- MAZO 2.2 µH 14 A shielded power inductor
- MAZO 3.3 µH 11.5 A shielded power inductor
- MAZO 4.7 µH 10.5 A shielded power inductor
- MAZO 6.8 µH 8 A shielded power inductor
Same footprint, other values
Same 11.5 × 10.3 mm body, by inductance.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1040-R22-M-1A | 0.22 µH | 70 A | 37 A | 0.8 mΩ | 4 mm | $0.52 |
| LPCA-1040-R36-M | 0.36 µH | 50 A | 30 A | 1.2 mΩ | 4 mm | $0.53 |
| VCMA-1040-R36-M-1A | 0.36 µH | 54 A | 32 A | 1.2 mΩ | 4 mm | $0.52 |
| VCMA-1040-R47-M-1A | 0.47 µH | 45 A | 27 A | 1.7 mΩ | 4 mm | $0.52 |
| VCMA-1040-R56-M-1A | 0.56 µH | 38 A | 26 A | 1.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-R68-M-1A | 0.68 µH | 32 A | 23 A | 2.4 mΩ | 4 mm | $0.52 |
| VCMA-1040-1R5-M-1A | 1.5 µH | 27 A | 17 A | 3.8 mΩ | 4 mm | $0.52 |
| VCMA-1040-2R2-M-1A | 2.2 µH | 19 A | 14 A | 7 mΩ | 4 mm | $0.52 |
| VCMA-1040-3R3-M-1A | 3.3 µH | 17 A | 11.5 A | 11.8 mΩ | 4 mm | $0.55 |
| VCMA-1040-4R7-M-1A | 4.7 µH | 15 A | 10.5 A | 16 mΩ | 4 mm | $0.55 |
| VCMA-1040-6R8-M-1A | 6.8 µH | 12.5 A | 8 A | 25 mΩ | 4 mm | $0.55 |
| VCMA-1040-8R2-M-1A | 8.2 µH | 11 A | 7.8 A | 27 mΩ | 4 mm | $0.62 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0420-1R0-M-1A | 1 µH | 7.5 A | 6.5 A | 24 mΩ | 4.75 × 4.45 × 2 mm | $0.28 |
| VCMA-0530-1R0-M-1A | 1 µH | 11 A | 8.5 A | 13 mΩ | 5.7 × 5.4 × 3 mm | $0.30 |
| VCMA-0630-1R0-M-1A | 1 µH | 15.5 A | 13.5 A | 7.4 mΩ | 7.3 × 6.8 × 3 mm | $0.24 |
| VCMA-1350-1R0-M-1A | 1 µH | 39.5 A | 26 A | 2 mΩ | 13.8 × 12.9 × 5 mm | $0.75 |
| VCMA-1365-1R0-M-1A | 1 µH | 43 A | 38 A | 1.9 mΩ | 13.8 × 12.9 × 6.5 mm | $0.79 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.52 | $2.60 |
| 50–149 | $0.38 | $19.00 |
| 150–499 | $0.304 | $45.60 |
| 500–2999 | $0.236 | $118.00 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Can't find it? We'll source it — and check it fits.
Not sure it fits your tool/process? Ask an engineer to check
An MST engineer will review your requirement and reply to help with sourcing and compatibility.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.22–22 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 0.62–58 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 4.0 mm. More current: VCMA-1350; smaller: VCMA-0630.
Industry and product applications
VCMA-1040-1R0-M-1A is a VCMA-1040 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-1040-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-1040-1R0-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.
Frequently asked questions
What are the key specifications of VCMA-1040-1R0-M-1A?
VCMA-1040-1R0-M-1A: Brand: MAZO / Mazotech; Series: VCMA-1040; Inductance L0: 1 µH ±20% (1 MHz, 1.0 V); DCR typ.: 2.6 mΩ; DCR max.: 3.1 mΩ; Heating current Idc typ.: 19 A. Full values are in the specifications table above.
Which parts can VCMA-1040-1R0-M-1A be evaluated as an alternative to?
VCMA-1040-1R0-M-1A is listed as an alternative to Würth Elektronik 74437368010, TDK SPM10040T-1R0M, Coilcraft XAL1030-102MEC, Cyntec VCMT104T-1R0MN54M, Cyntec VCMV104T-1R0MN23M, Vishay IHLP4040DZER1R0M01 (same footprint class and nominal value). Request a quote with the RFQ form on this page.
What does VCMA-1040-1R0-M-1A cost?
VCMA-1040-1R0-M-1A is US$0.52 per piece, minimum order 5 pieces, with DHL shipping quoted by destination.
Can MST source a part number that is not listed?
Yes. Send the exact part number and quantity through the RFQ form and MST sources it and replies with a quote.